• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.55-58
• /
• 2007

Thermal Characterization of an EPDM/IIR rubber blend was performed using TG/DTG analysis. While TGA thermograms of a virgin EPDM and IIR showed their own characteristic thermal decomposition curves, that of an EPDM/IIR blend sample showed a characteristic curve, exhibiting both decomposition characteristics of EPDM and IIR. This finding was more clarified from DTG analysis obtained by differentiation of TGA thermograms, being exhibited as two distinct shifted-peaks. Degrees of peak-shift (${\Delta}T$) compared to their original positions were $+25\;^{\circ}C$ for IIR and $-15\;^{\circ}C$ for EPDM, respectively. From these facts, thermal stability of EPDM is considered comparatively better than IIR, and moreover, it can be an evidence for the characteristics of a partial compatibility between EPDM and IIR. It is noteworthy that, if we prepare in advance a calibration curve for the composition about EPDM/IIR blend, it may be possible to analyze quantitatively an EPDM/IIR blend, using comparatively simple TGA experiments as in the present work.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.112-118
• /
• 2002

The adaptive m filters is more effective than m filters when acoustic feedback exists, in which cause an order of a FIR filter must be very large if some of poles of the ideal control filter are near the unit circle. But the IIR filters may have stability problems especially when the adaptive algorithm is not converged. In this paper, a stabilizing procedure for adaptive IIR filters is proposed. In the beginning of the ANC system, it improve a stability by pulling the poles of the IIR filter to the center of the unit circle, and it returns the poles to their original positions after the filter converge. Computer simulations and experiments are performed to show the effectiveness of proposed schemes.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.556-563
• /
• 2002

In this paper, a novel method for designing an M-channel, causal, stable IIR cosine-modulated filter bank (CMFB) with near PR property is proposed. The IIR prototype filter is designed with a simple constraint using lattice stucture with 1st order allpass filter components. The IIR prototype filter which is designed by the proposed method has higher stopband attenuation and sharper roll-off characteristic than the one which is designed by the previously proposed method with similar complexity. The proposed M-channel IIR CMFB which is designed from this IIR prototype filter is applied to subband acoustic echo canceller (AEC). We obtained about 15dB higher ERLE using this subband AEC than when M-channel FIR subband AEC with similar complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.821-826
• /
• 2003

In this paper, constrained Remez exchange algorithm is proposed to reduce the critical path of an IIR filter. The proposed algorithm is based on Remez exchange algorithm and least squares method. By IIR filter design examples, it is shown that the proposed method can maximally increase speed by 20%.

• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.193-200
• /
• 1998

It is well known that EPDM(ethylene propylene diene monomer) rubber has inherently excellent resistance to the weathering, ozone, heat, cold and moisture, whereas crosslinked IIR (isobutylene isoprene divlnyl benzene terpolymer) shows proper resistance to the water and gas permeation. Various characteristics of EPDM blend with crosslinked IIR such as curing characteristics, mechanical properties, dispersion of minor component and gas impermeability were explored. The optimum curing time $(t_{90})$ examined with peroxide was decreased by adding small amount of crosslinked IIR to the EPDM rubber. Mechanical properties of blends such as tensile strength, hardness and elongation at break were enhanced by increasing EPDM content. These results might be explained with the affinity of carbon black to the EPDM rubber. On the other hand, the physical properties were not changed significantly after aging, and the increase of crosslinked IIR fraction caused the decrease of compression set to small rate. EPDM rubber shows different behavior with crosslinked IIR in oxygen permeability. By adding 30wt.% crosslinked IIR to the EPDM rubber, the resistance to the oxygen permeation was improved up to three times than that of pure EPDM rubber. Conclusively, EPDM blend containing 30wt.% crosslinked IIR might be commercially applied to the o-ring and electric parts because of its proper resistance to the weathering, ozone and oxygen permeability.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.11-19
• /
• 1994

In this paper, we propose a new method to desing IIR Nyquist filters. By thismethod, we can design IIR nyquist filters which prossess linear phase characteristics andare lower in order than FIR Nyquist filters. WE derive expressions for zero-phased IIR Nyquist filters and propose new desing methods for them. An iteration process is used to design the proposed IIR Nyquist filter, and in each iteration step a modified version of the Remez exchange algorithm is used. Finally, the propose desing method is demonstrated through design examples.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2555-2557
• /
• 2001

The adaptive IIR filters is more effective than adaptive FIR filters which have the same order of IIR filters. But the IIR filters may have stability problems especially when the adaptive algorithm is not converged. In this paper, a stabilizing procedure for adaptive IIR filters is proposed, and computer simulation is performed to show the effectiveness of proposed schemes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.143-149
• /
• 2011

In this paper, IIR structures are proposed to reduce the computation complexity of the secondary-pass estimation in active noise control(ANC) systems. However, there are stability problems of using IIR models to reduce the computation complexity in ANC systems. To overcome these problems, we propose a stabilizing procedure of recursive least mean squares (RLMS) algorithms for eatimating the parameters of IIR models of the secondary path transfer functions. The multichannel ANC systems are implemented by using the TMS320C6713 DSP board to test the performance of computation complexity and stability of the proposed methods. Comparing the IIR filters with the FIR filters, the IIR filters can reduce 50[%] of the computation and obtain similar noise reduction result.

• Journal of Information Science Theory and Practice
• /
• v.1 no.3
• /
• pp.12-32
• /
• 2013

The paper introduces the research area of interactive information retrieval (IIR) from a historical point of view. Further, the focus here is on evaluation, because much research in IR deals with IR evaluation methodology due to the core research interest in IR performance, system interaction and satisfaction with retrieved information. In order to position IIR evaluation, the Cranfield model and the series of tests that led to the Cranfield model are outlined. Three iconic user-oriented studies and projects that all have contributed to how IIR is perceived and understood today are presented: The MEDLARS test, the Book House fiction retrieval system, and the OKAPI project. On this basis the call for alternative IIR evaluation approaches motivated by the three revolutions (the cognitive, the relevance, and the interactive revolutions) put forward by Robertson & Hancock-Beaulieu (1992) is presented. As a response to this call the 'IIR evaluation model' by Borlund (e.g., 2003a) is introduced. The objective of the IIR evaluation model is to facilitate IIR evaluation as close as possible to actual information searching and IR processes, though still in a relatively controlled evaluation environment, in which the test instrument of a simulated work task situation plays a central part.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1312-1320
• /
• 2009

This paper presents an efficient design method of 2-D infinite impulse response(IIR) digital filter based on a particle swarm optimization(PSO) algorithm. The design task is reformulated as a constrained minimization problem and is solved by our newly developed PSO algorithm. To ensure the stability of the designed 2-D IIR digital filters, a new stability strategy is embedded in the basic PSO algorithm. The superiority of the proposed method is demonstrated by several experiments. The results show that the approximation error of the resultant filters are better than those of the digital filters which designed by recently published filter design methods. The proposed design method can also obtain the stable2-D IIR digital filters.