• 에너지공학
• /
• 제5권2호
• /
• pp.138-145
• /
• 1996

The particulate collection at high temperature and high pressure (HTHP) is important on the advanced coal power generation system not only to improve the thermal efficiency of the system, but also to prevent the gas turbine from erosion and to meet the emission limits of the effluent gas. The specifications for particulate collection in those systems such as Integrated Coal Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) require the absolutely high collection efficiency and reliability. Advanced cyclone, granular bed filter, electrostatic precipitator, and ceramic filter have been developed for particulate collection on the advanced coal power generation system. However, rigid ceramic filters and granular bed filter among them show the best potential. The current technology of these collectors was evaluated in this paper. The experienced problems of these systems on performance, materials, and mechanical design were investigated. Ceramic candle filters has the best potential for IGCC at this moment because it has nearly the highest efficiency comparing with other filtering systems and has accumulated many reliable design data resulted from many field experiences.

• 한국결정성장학회지
• /
• 제27권6호
• /
• pp.319-326
• /
• 2017

본 연구에서는, IGCC(Integrated Gasification Combined Cycle: 석탄가스화 복합발전)에서 배출되는 용융 슬래그로 부터 지오폴리머를 제조하여 알칼리 활성화제의 몰농도, W/S 비(water/ solid ratio), 재령일에 따른 비중과 압축강도 등 물리적 특성을 분석함과 동시에 발포제인 Si 슬러지를 첨가하여 경량화 소재로서의 가능성을 고찰하였다. 특히 경량 지오폴리머의 강도 특성향상을 위하여 복합 활성화제 및 pre-curing 공정을 적용하였다. 단일 활성화제를 사용한 경량 지오폴리머의 압축 강도는 9.5 MPa이었으나, 복합 활성화제로 제조할 경우 2~5배 정도의 압축강도 증진 효과를 나타내었다. 더군다나, pre-curing을 실시한 경량 지오폴리머의 경우, pre-curing하지 않은 시편들에 비해 18~48 % 가량 높은 압축강도 값을 보였다. 본 연구에서 복합 활성화제와 pre-curing 공정의 도입으로 얻어진 경량 지오폴리머의 최고 압축강도는 40 MPa(3일 재령하여 밀도가 $1.83g/cm^3$인 시편)로서 시멘트 콘크리트에 필적하였다. XRD 결정상 분석과 SEM을 이용한 미세구조 분석을 통하여 지오폴리머 표면에서 C-S-H 겔(sodium silicate hydrate gel)의 모상에 꽃봉오리 모양의 zeolite 결정상이 균일하게 분포된 것을 확인할 수 있었다.

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.378-382
• /
• 2018

It is a known fact that the cement production is responsible for almost 5% of total worldwide $CO_2$ emission, the primary factor affecting global warming. Geopolymers are valuable as ordinary Portland cement (OPC) substitutes because geopolymers release 80% less $CO_2$ than OPC and have mechanical properties sufficiently similar to those of OPC. Therefore, geopolymers have proven attractive to eco-friendly construction industries. Geopolymers can be fabricated from aluminum silicate materials with alkali activators such as fly ash, blast furnace slag, and so on. Integrated gasification combined cycle (IGCC) slag has been used for fabricating geopolymers. In general, IGCC slag geopolymers are fabricated with finely ground and sieved (<128 mesh) IGCC slag. The grinding process of as-received IGCC slag is one of the main costs in geopolymer production. Therefore, the idea of using as-received IGCC slag (before grinding the IGCC slag) as aggregates in the geopolymer matrix was introduced to reduce production cost as well as to enhance compressive strength. As-received IGCC slag (0, 10, 20, 30, 40 wt%) was added in the geopolymer mixing process and the mixtures were compared. The compressive strength of geopolymers with an addition of 10 wt% as-received IGCC slag increased by 19.84% compared to that with no additional as-received IGCC slag and reached up to 41.20 MPa. The enhancement of compressive strength is caused by as-received IGCC slag acting as aggregates in the geopolymer matrix like aggregates in concrete. The density of geopolymers slightly increased to $2.1-2.2g/cm^3$ with increasing slag addition. Therefore, it is concluded that a small addition of as-received IGCC slag into the geopolymer can increase compressive strength and decrease the total cost of the product. Moreover, the direct use of as-received IGCC slag may contribute to environment protection by reducing process time and $CO_2$ emission.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.445-448
• /
• 2007

석탄가스화 복합발전(IGCC)에서 석탄 가스화 기술이 전 공정의 성능에 큰 영향을 미치는 중요한 요소이다. 연료 및 산화제의 공급방식, 가스화기의 기본 구조, 벽면의 구성 방식, 용융 슬랙 및 생산되는 합성가스 배출 방식 등에 따라 가스화의 성능이 영향을 받는다. IGCC plant의 정확한 성능 해석을 위해서는 석탄가스화기 공정 모델의 정밀도를 높일 필요성이 있다. 기존의 열병합 발전 사이클 해석에서 적용되었던 열 및 물질정산과 평형계산 방식을 통하여 석탄가스화기 공정을 해석하는 방법을 확인, 정리하고 이를 개선하기 위한 절차 및 방안을 제시하고자 한다. 가스화기 내부 공정을 크게 탈휘발과 가스화의 단계로 구분하여 가스화기 출구조건을 예측하였으며, ASPEN PLUS를 이용한 공정해석을 실시하였다. 가스화기 출구에서의 합성가스는 주생성가스인 CO, $H_2$를 위주로 하여 조성을 얻을 수 있고, 그 결과들을 선행연구들과의 비교를 통하여 가스화기 모델의 분석을 실시한다. 그리고 가스화기 해석의 정밀도를 높이기 위한 향후 고려될 가스화기 모델에 관하여 논의한다.

• 한국유체기계학회 논문집
• /
• 제13권1호
• /
• pp.9-16
• /
• 2010

In the power generation industry, various efforts are needed to cope with tightening regulation on carbon dioxide emission. Integrated gasification combined cycle (IGCC) is a relatively environmentally friendly power generation method using coal. Moreover, pre-combustion $CO_2$ capture is possible in the IGCC system. Therefore, much effort is being made to develop advanced IGCC systems. However, removal of $CO_2$ prior to the gas turbine may affect the system performance and operation because the fuel flow, which is supplied to the gas turbine, is reduced in comparison with normal IGCC plants. This study predicts, through a parametric analysis, system performances of both an IGCC plant using normal syngas and a plant with $CO_2$ capture. Performance characteristics are compared and influence of $CO_2$ capture is discussed. By removing $CO_2$ from the syngas, the heating value of the fuel increases, and thus the required fuel flow to the gas turbine is reduced. The resulting reduction in turbine flow lowers the compressor pressure ratio, which alleviates the compressor surge problem. The performance of the bottoming cycle is not influenced much.

• 한국수소및신에너지학회논문집
• /
• 제24권3호
• /
• pp.249-254
• /
• 2013

The integrated gasification combined cycle (IGCC) system is well known for its high efficiency compared with other coal fueled power generation system. The aim of this study is to confirm the feasibility of using bio gas in coal feeding system and syngas recirculation system. The effects of using bio gas in the gasifier on the syngas composition were investigated through simulations using the Aspen Plus process simulator. It was found that these changes had an influence on the syngas composition of the final stream and bio gas can be used in a gasifier system.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.85-88
• /
• 1999

석탄가스화 복합발전(IGCC, Integrated Gasification Combined Cycle)은 고효율, 청정 전력 생산 기술로 차세대 석탄이용 발전 기술의 대안으로 제시되고 있다. 기존 석탄화력발전소의 발전 효율인 36-38%보다 적어도 2-6% 우수한 효율을 나타내고 있으며 21세기 석탄 이용시 적용될 환경 규제치를 가장 현실적으로 만족시킬 수 있는 차세대 석탄화력발전 시스템으로 평가받고 있다. 고청정 환경성의 측면에서 석탄가스화 복합발전설비는 기존의 유연탄 화력발전 방식에 비해서 SOx, NOx 및 분진 등의 배출량을 크게 감소시킬 수 있을 뿐만 아니라 재(ash)를 분진형태가 아닌 용융된 후 엉긴 슬랙형태로 수거하므로 환경적으로 안전하며, 슬랙과 탈황공정에서 만들어지는 황원소를 회수하여 경제성 있는 부산물로 활용할 수 있다는 장점이 있다.(중략)

• 한국수소및신에너지학회논문집
• /
• 제22권1호
• /
• pp.118-127
• /
• 2011

An IGCC was evaluated as one of the next generation technologies that would be able to substitute for coal-fired power plants. According to "The 4th Basic Plan of Long-term Electricity Supply & Demand" which is developed by the Electricity Business Acts, the first IGCC will be operated at 2015. Like other new and renewable energy such as solar PV, Fuel cell, The IGCC is considered as non-competitive generation technology because it is not maturity technology. Before the commercial operation of an IGCC in our electricity market, its economic feasibility under the Korean electricity market, which is cost-based trading system, is studied to find out institutional support system. The results of feasibility summarized that under the current electricity trading system, if the IGCC is considered like a conventional plant such as nuclear or coal-fired power plants, it will not be expected that its investment will be recouped within life-time. The reason is that the availability of an IGCC will plummet since 2016 when several nuclear and coal-fired power plants will be constructed additionally. To ensure the reasonable return on investment (NPV>0 IRR>Discount rate), the availability of IGCC should be higher than 77%. To do so, the current electricity trading system is amended that the IGCC generator must be considered as renewable generators to set up Price Setting Schedule and it should be considered as pick load generators, not Genco's coal fired-generators, in the Settlement Payment.

• 한국건설순환자원학회논문집
• /
• 제7권2호
• /
• pp.101-108
• /
• 2019

본 연구는 석탄가스화발전(IGCC)에서 발생하는 부산물인 CGS에 대한 콘크리트용 잔골재로서의 활용성을 분석한 것이다. 즉, KS F 2527 "콘크리트용 골재"에서 천연 및 용융슬래그 잔골재에 해당하는 품질항목을 중심으로 CGS 1~12회분에 대한 물성평가를 실시하였다. 그 결과, 물리적인 특성으로 입자모양판정실적률, 안정성 및 팽창성은 KS의 품질기준을 전부 만족하였으나, 절건밀도와 흡수율은 7~12회분에서 품질이 불안정한 것으로 나타났다. 입도의 경우 불균일한 굵은 입자분포로 인해 품질이 다소 불안정하였고, 7~12회분은 입자가 너무 굵은 것으로 나타났다. 유해물질 특성으로 0.08mm체 통과량 또한 7~12회분의 일부 수준에서 KS기준을 벗어났으나, 염화물함유량, 점토덩어리, 석탄 및 갈탄은 모두 만족하는 것으로 나타났다. 한편, 화학성분은 1~6회분에서 $SO_3$를 제외하고 전부 만족하였으며, 유해물질 함유량 용출량은 함유량에서 7~12회분의 F를 제외하고 전부 규정치 이내로 나타났다. SEM분석 결과 1~6회분에 비해 7~12회분이 거친 표면성상 및 다공질을 보여 품질이 저하된 것으로 판단되었다. 따라서 향후 콘크리트용 골재로서 활용하기 위해서는 별도 조치를 통한 품질편차 감소가 필요하고, 양질의 골재와 혼합하여 품질을 보완한다면 골재수급난 해소 및 순환자원 활용에 긍정적으로 기여할 수 있을 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1639-1648
• /
• 1996

Protection of gas turbine blade from its erosion and abrasion at high temperature and pressure is the first goal to cleanup the hot gas upstream for IGCC and PFBC. Ceramic filters represent an attractive technology for particle removal at high temperature and high pressure condition. They have demonstrated being a good system for improvement of thermal efficiency and reduction of effluent pollutants in advanced coal-based power systems such as IGCC and PFBC. Ceramic filter elements currently being developed were evaluated in the previous paper. In this paper, we measured the ash size and distribution on cleaning of ceramic candle filter. The results are as follows : in this experimental range, ceramic candle filter was shown to be fully adequate for the removal process of dust under high temperature and pressure. Also filtration efficiency of ceramic candle filter was higher than 98% compared with the regulation limit of particle size in gas turbine inlet.