• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.485-490
• /
• 1999

Wind vector information over the ocean is currently obtained using multiple beam scatterometer data. The scatterometers on ERS-1/2 generate wind vector information with a spatial resolution of 50km and accuracies of $\pm$2m/s in wind speed and $\pm$20$^{\circ}$ in wind direction. Synthetic aperture radar (SAR) data over the ocean have the potential of providing wind vector information independent of weather conditions with finer resolution. Finer resolution wind vector information can often be useful particularly in coastal regions where the scatterometer wind information is often corrupted because of the lower resolution system characteristics which is often contaminated by the signal returns from the coastal areas or ice in the case of arctic environments. In this paper we tested CMOD_4 and CMOD_IFR2 algorithms for extracting the wind vector from SAR data. These algorithms require precise estimation of normalized radar cross-section and wind direction from the SAR data and the local incidence angle. The CMOD series algorithms were developed for the C-band, VV-Polarized SAR data, typically for the ERS SAR data. Since RADARSAT operates at the same C-band but with HH-Polarization, the CMOD series algorithms should not be used directly. As a preliminary approach of resolving with this problem, we applied the polarization ratio between the HH and VV polarizations in the wind vectors estimation. Two test areas, one in front of Inchon and several sites around Jeju island were selected and investigated for wind vector estimation. The new results were compared with the wind vectors obtained from CMOD algorithms. The wind vector results agree well with the observed wind speed data. However the estimation of wind direction agree with the observed wind direction only when the wind speed is greater than approximately 3.0m/s.

• Journal of the Korean earth science society
• /
• v.31 no.5
• /
• pp.475-487
• /
• 2010

Sea surface wind field was retrieved from high-resolution SIR-C SAR data by using CMOD algorithms off the east coast of Korea. In order to extract wind direction information from SAR data, a two-dimensional spectral analysis method was applied to the normalized radar cross section of the image. An $180^{\circ}$-ambiguity problem in the determination of wind direction was solved by selecting a direction nearest to the wind vector of the ECMWF reanalysis data. Comparison of the wind retrieval patterns with the ECMWF and NCEP/NCAR dataset showed RMS errors in the range of 1.30 to $1.72\;ms^{-1}$. In contrast, comparison of wind directions revealed large errors of greater than $60^{\circ}$, which is enormously higher than the permitted limit of about $20^{\circ}$ for satellite scatterometer winds. Compared with wind speed results from different algorithms, wind vectors based on commonly-used CMOD4 algorithm showed good agreement with those derived by other algorithms such as CMOD_IFR2 and CMOD5, particularly at medium winds from 4 to $8\;ms^{-1}$. However, apparent discrepancy appeared at low winds (< $4\;ms^{-1}$). This study also addressed an importance of accurate wind direction data to improve the accuracy of wind speed retrieval and discussed potential causes of wind retrieval errors from SAR data.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.99-110
• /
• 2001

Open-ended pipe piles are often used for the foundations of both land and offshore structures because of their relatively low driving resistance. In this study, load tests were performed on model pipe piles installed in calibration chamber samples in order to investigate the effects of pile installation method on soil plugging and bearing capacity. Results of the test program showed that the incremental filling ratio (IFR), which is used to indicate the degree of soil plugging in open-ended piles, decreased (i) with increasing hammer weight for the same driving energy and (ii) with increasing hammer weight at the same fall height. The base and shaft resistance of the piles were observed to increase (i) with increasing hammer weight for the same driving energy and (ii) with increasing hammer weight at the given same fa11 height. The jacked pile was found to be have higher bearing capacity than an identical driven pile under similar conditions, mostly due to the more effective development of a soil plug in jacking than in driving.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1485-1489
• /
• 2007

Achaete-scute like 2 (ASCL2) gene encodes a member of the basic helix-loop-helix transcription factor which is essential for the maintenance of proliferating trophoblasts during placental development. ASCL2 gene preferentially expresses the maternal allele in the mouse. However, it escapes genomic imprinting in the human. In this study, the complete open reading frame consisting of 193 amino acids of ASCL2 gene was obtained. Sequence analysis indicated that a C-G mutation existed in the 3' region between Meishan and Large White pigs. The polymorphism was used to determine the monoallelic or biallelic expression with RT-PCR-RFLP in pigs of Large $White{\times}Meishan$ $F_1$ hybrids. Imprinting analysis indicated that the ASCL2 gene expression was biallelic in all the tested tissues (heart, liver, spleen, lung, kidney, stomach, small intestine, skeletal muscle, fat, uterus, ovary and pituitary). PCR-RFLP was used to detect the polymorphism in 270 pigs of the "$Large\;White{\times}Meishan$" $F_2$ resource population. The statistical results showed highly significant associations of the genotypes and fat meat percentage (FMP), lean meat percentage (LMP) and ratio of lean to fat (RLF) (p<0.01), and significant associations of the genotypes and loin eye area (LEA) and internal fat rate (IFR) (p<0.05).

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.1
• /
• pp.28-34
• /
• 2010

Traditionally engineers' main roles are concentrated on solving any given problems and engineering education has emphasized problem solving ability. Therefore engineers intend to solve easily perceived problems with their knowledge and experience instead of trying to analyze the given problems thoroughly and to define real problems, and go through lots of trial and error. So, engineers require the ability to define real problems accurately before trying to solve the problems. This study proposes a real problem definition process using visualization of a core zone and TRIZ concepts such as contradictions and IFR(Ideal Final Result) in order to define real problems with minimum trial and error. TRIZ is the theory of inventive problem solving and was developed by a Soviet engineer and researcher Genrich Altshuller from 1946. Nowadays many industries use TRIZ and its effectiveness was already proved by lots of real problem solving in various areas. Therefore TRIZ might be very effective tool for developing students' inventive thinking ability in engineering education.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.295-302
• /
• 2007

Statement of problem. Fracture of the tooth-colored superstructure material is one of the main prosthetic complications in implant-supported prostheses. Purpose. The purpose of this in vitro study was to compare the fracture strength between the cement-retained implant-supported metal-ceramic crowns and the indirect composite resinveneered metal crowns under the vertical compressive load. Material and methods. Standard implants of external type (AVANA IFR 415 Pre-mount; Osstem Co., Busan, Korea) were embedded in stainless steel blocks perpendicular to their long axis. Customized abutments were fabricated using plastic UCLA abutments (Esthetic plastic cylinder; Osstem Co., Busan, Korea). Thirty standardized copings were cast with non-precious metal (Rexillium III, Pentron, Walling ford, Conn., USA). Copings were divided into two groups of 15 specimens each (n = 15). For Group I specimens, metal-ceramic crowns were fabricated. For Group II specimens, composite resin-veneered (Sinfony, 3M-ESPE, St. Paul, MN, USA) metal crowns (Sinfony-veneered crowns) were fabricated according to manufacturer's instructions. All crowns were temporary cemented and vertically loaded with an Instron universal testing machine (Instron 3366, Instron Corp., Norwood, MA, USA). The maximum load value (N) at the moment of complete failure was recorded and all data were statistically analyzed by independent sample t-test at the significance level of 0.05. The modes of failure were also investigated with visual analysis. Results. The fracture strength of Sinfony-veneered crowns ($2292.7{\pm}576.0N$) was significantly greater than that of metal-ceramic crowns ($1150.6{\pm}268.2N$) (P < 0.05). With regard to the failure mode, Sinfony-veneered crowns exhibited adhesive failure, while metal-ceramic crowns tended to fracture in a manner that resulted in combined failure. Conclusion. Sinfony-veneered crowns demonstrated a significantly higher fracture strength than that of metal-ceramic crowns in cement-retained implant-supported prostheses.

• Korean small business review
• /
• v.42 no.3
• /
• pp.195-220
• /
• 2020

In this study, we examined the effects of major shareholder's holdings and foreign shareholder's holdings on capital structure with the samples of listed non-financial firms in KOSPI and KOSDAQ. More specifically, we conduct the data on 7,074 large firms and 2,394 SMEs(Small-Medium Enterprises) before and after the adoption of K-IFRS from 2002 to 2019. The main results can be summarized as follows. The results indicate that the adoption of K-IFRS affects the capital structure of large firms more than SMEs. The major shareholder's holdings and the foreign shareholder's holdings of the large and SMEs listed on the KOSPI and the KOSDAQ market have a significant effect on the leverage ratio. It can be seen that major shareholders of large firms and SMEs reduce the leverage ratio by recognizing the use of debt as financial risk. In addition, it can be seen that regardless of whether or not K-IFRS is adopted, foreign shareholders recognize the use of debt as financial risk and reduce the leverage ratio in order to reduce the investment risk.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.117-144
• /
• 2013

The MOLIT is also establishing the flight safety standards for UAV within the current Aviation Law. Accordingly the required flight criteria includes operator location, mission operation limit, equipment, etc. which are the principle and standard applied based on the airspace use for UAV. Also, general flight rules, visual flight rules, instrument flight rules are required to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS(Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria and a law complementary scheme.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.125-139
• /
• 2021

This study identifies the trend of Korean accounting researches on profit adjustment. We analyzed the abstract of accounting research articles published in Korean Citation Index (KCI) by using text mining technique. Among papers whose themes were profit adjustment, topics were divided into 4 parts: (i) Auditing and audit reports, (ii) corporate taxes and debt ratios, (iii) general management strategy of companies, and (iv) financial statements and accounting principles. Unlike the prediction that financial statements and accounting principles would be the main topic, auditing was analyzed as the most studied area. We analyzed topic trends based on the number of papers by topic, and could figure out the impact of K-IFRS introduction on profit adjustment research. By using Big Data method, this study enabled the division of research themes that have not been available in the past studies. This study enables the policy makers and business managers to learn about additional considerations in addition to accounting principles related to profit adjustment.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.141-154
• /
• 2014

The adoption of International Financial Reporting Standards (IFRS) is the one of important issues in the recent accounting research because the change from local GAAP (Generally Accepted Accounting Principles) to IFRS has a substantial effect on accounting information. Over 100 countries including Australia, China, Canada and the European Union member countries adopt IFRS (International Financial Reporting Standards) for financial reporting purposes, and several more including the United States and Japan are considering the adoption of IFRS (International Financial Reporting Standards). In Korea, 61 firms voluntarily adopted Korean International Financial Reporting Standard (K-IFRS) in 2009 and 2010 and all listed firms mandatorily adopted K-IFRS (Korea-International Financial Reporting Standards) in 2011. The adoption of IFRS is expected to increase financial statement comparability, improve corporate transparency, increase the quality of financial reporting, and hence, provide benefits to investors This study investigates whether recognized accounts receivable discounting (AR discounting) under Korean International Financial Reporting Standard (K-IFRS) is more value relevant than disclosed AR discounting under Korean Generally Accepted Accounting Principles (K-GAAP). Because more rigorous standards are applied to the derecognition of AR discounting under K-IFRS(Korea-International Financial Reporting Standards), most AR discounting is recognized as a short term debt instead of being disclosed as a contingent liability unless all risks and rewards are transferred. In this research, I try to figure out industrial responses to the changes in accounting rules for the treatment of accounts receivable toward more strict standards in the recognition of sales which occurs with the adoption of Korea International Financial Reporting Standard. This study examines whether accounting information is more value-relevant, especially information on accounts receivable discounting (hereinafter, AR discounting) is value-relevant under K-IFRS (Korea-International Financial Reporting Standards). First, note that AR discounting involves the transfer of financial assets. Under Korean Generally Accepted Accounting Principles (K-GAAP), when firms discount AR to banks before the AR maturity, firms conventionally remove AR from the balance-sheet and report losses from AR discounting and disclose and explain the transactions in the footnotes. Under K-IFRS (Korea-International Financial Reporting Standards), however, most firms keep AR and add a short-term debt as same as discounted AR. This process increases the firms' leverage ratio and raises the concern to the firms about investors' reactions to worsening capital structures. Investors may experience the change in perceived risk of the firm. In the study sample, the average of AR discounting is 75.3 billion won (maximum 3.6 trillion won and minimum 18 million won), which is, on average 7.0% of assets (maximum 38.6% and minimum 0.002%), 26.2% of firms' accounts receivable (maximum 92.5% and minimum 0.003%) and 13.5% of total liabilities (maximum 69.5% and minimum 0.004%). After the adoption of K-IFRS (Korea-International Financial Reporting Standards), total liabilities increase by 13%p on average (maximum 103%p and minimum 0.004%p) attributable to AR discounting. The leverage ratio (total liabilities/total assets) increases by an average 2.4%p (maximum 16%p and minimum 0.001%p) and debt-to-equity ratio increases by average 14.6%p (maximum 134%p and minimum 0.006%) attributable to the recognition of AR discounting as a short-term debt. The structure of debts and equities of the companies engaging in factoring transactions are likely to be affected in the changes of accounting rule. I suggest that the changes in accounting provisions subsequent to Korea International Financial Reporting Standard adoption caused significant influence on the structure of firm's asset and liabilities. Due to this changes, the treatment of account receivable discounting have become critical. This paper proposes an intelligent diagnostic system for estimating negative impact on stock value with self-organizing maps and case based reasoning. To validate the usefulness of this proposed model, real data was analyzed. In order to get the significance of this proposed model, several models were compared to the research model. I found out that this proposed model provides satisfactory results with compared models.