• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.38-43
• /
• 2015

This paper describes a GPS signal generator that can generate multiple satellite signals in real time at the RF level. It realizes the verified software algorithm on a FPGA. The algorithm models orbits and environmental errors such as ionospheric and tropospheric multipath. The position of a simulated receiver is one of simulation parameters. The hardware which consists of a digital logic board and an analog board can generate 16 simulated satellites signals at the same time. The users can generate spoofing signals and jamming signals as well as satellite signals by using the windows-based control software. In addition, the software provides GIS-based simulation scenarios editing tools. We verified the generator by using commercial receivers. As an application, we configured generators as indoor positioning systems and tested them in a building. To improve the accuracy of indoor systems is our further study.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.6
• /
• pp.34-40
• /
• 2011

From the present paper researched about the Design of Image Rejection SSB Modulator for X-Band Monopulse RADAR using Waveguide Hybrid Coupler. Generally, SSB modulator mixes IF(RF) and LO signals, and then it converts to RF(IF) frequency band. In this case, in order to transmit one sideband from RF band, SSB modulator is demanded the removal of image and LO signal. The balanced mixer was designed using waveguide hybrid coupler and crystal mixer diode to mix LO and IF signal. And also the IF Amplifier was designed for IF(+) and IF(-) signal generation which have $90^{\circ}$ phase differences which are suitable in two crystal mixer diode inputs. In order to maintain a high electric reliability from high frequency band the waveguide and IF amplifier's case were manufactured with aluminum using deep brazing techniques. The test result of SSB modulator, LO and sideband signal rejection ratio were 14.2dB and 18.5dB respectively.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.4
• /
• pp.389-399
• /
• 2024

In this study, we designed a USRP-based multi-antenna GPS L1 C/A RF signal generator and verified its performance using commercial receivers. The designed RF signal generator consists of a software-based signal generation module that generates multiple GPS L1 C/A IF signals, and an RF signal transmission module that up-converts the generated IF signals to RF signals for transmission. The multi-GPS signals are generated by reflecting time delays, according to the arrangement and structure of the antennas, in the code and carrier, and each signal is transmitted through its respective RF front-end. The RF signals were verified using a commercial U-blox receiver, and the operation and performance of the multi-antenna signals were confirmed using an attitude determination system configured with two U-blox receivers. The designed signal generator can be used not only for precise navigation and attitude determination but also for the development of various array signal processing systems such as A/DOA, beamforming, and nulling.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1044-1050
• /
• 2013

This paper analyzes what is mitigated as spoofing attack using the U-Blox Receiver and GPS RF signal generator developed at ETRI. Generally the spoofing attack made the target receiver to be wrong navigation solution by providing false measurement of code and carrier. So we analyzed the impact of spoofing attack through the signal strength and navigation solution. In oder to test of effect of anti-spoofing signal, we consider the signal with antiphase code to spoofing signal and generated GPS normal signal and spoofing signal and anti-spoofing signal using GPS RF signal generator. This paper analyzed that the GPS receiver was responded to the spoofing attack according to code phase difference between spoofing and anti-spoofing signal. We confirmed that the spoofing signal was disappeared by anti-spoofing signal if code phase is an exact match.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.119-125
• /
• 2014

In this paper, we developed the signal generator of GNSS navigation signals and analysis the performance of DCO(Digitally Clock Oscillator) compensation algorithm for cumulative distance error thorough simulation. In general, To generate a GNSS signal calculates the Doppler and Initial Pseudorange by using the location information of the receiver and the satellite. The GNSS signal generator generates a signal by determine the carrier and code output frequency using the Doppler information which is calculated as a function of time. The output frequency of the carrier and code would be used the DCO scheme. At this time, It extract the bit and code information on a for each sample by accumulating the DCO. an error of Pseudorange is generated by the cumulative error of the DCO. If Pseudorange error occurs, so that the influence to and operation of the receiver. Therefore, in this paper, we implemented the accumulated error compensation algorithm of the DCO to remove the accumulated error components DCO thereof, Pseudorange accumulated error is removed through the experiment, it was confirmed to be a high accuracy can be operated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1401-1410
• /
• 2017

Cryptographic synchronization which synchronizes internal state of cryptographic algorithm and ciphertext stream between an encryptor and a decryptor affects the quality of secure communication. If there happens a synchronization loss between a transmitter and a receiver in a secure communication, the output of the receiver is unintelligible until resynchronization is made. Especially, in the secure communication on a wireless channel with high BER, synchronization performance can dominate its quality. In this paper, we proposed a novel and noise robust synchronization signal generation method as well as its detection algorithm. We generated a synchronization signal in the form of a masking structure based on the maximal length sequence, and developed a detection algorithm using a correlation property of the maximal length sequence. Experimental results have demonstrated that the proposed synchronization signal outperforms the conventional concatenated type synchronization signal in a noisy environment.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1759-1760
• /
• 2006

GPS 수신기에서 항법을 수행하기 위해서 신호탐색, 신호추적, 데이터 동기, 데이터 복조, 측정치 생성 및 위치 계산의 과정을 거쳐야 한다. TTFF(Time To First Fix)는 이러한 시간의 합으로 수신기의 성능을 나타내는 중요 평가지수 중의 하나이다. 일반적인 수신기의 TTFF는 80~90초인 것으로 알려져 있으며, 고속으로 운동하는 항체의 경우, 빠른 TTFF를 필요로 하므로 가장 긴 시간이 소비하는 신호탐색 과정의 시간을 줄여야 한다. 본 논문에서는 고속으로 운동하는 항체에서 GPS 신호의 코드 탐색 시간을 줄이기 위하여 다중 상관기 구조를 가지는 수신기를 설계 하고자한다. 설계한 수신기는 수신된 신호의 코드위상을 여러 개의 상관기에서 동시에 탐색하도록 다중 상관기를 구성하여 코드위상 검색에 소요되는 시간을 단축시킨다. 이를 검증하기 위하여 GPS 모의 신호 발생기를 이용하여 실험을 수행하였다. GPS 신호는 IF 데이터 수집 장치로부터 수집된 신호를 이용하며, 실험 수행 결과 다중 상관기를 이용하였을 때 TTFF가 단축되는 것을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.669-674
• /
• 2011

In this paper, a method for reduction of spurious signal in Digital RF Memory(DRFM) is proposed. Spurious response is a major performance issue of DRFM. This method is based on mixing a random phase LO signal into input IF signal and sampling it. The random phase LO signal is generated by high speed phase shifting characteristic of Direct Digital Synthesizer(DDS). Through this technique, we achieved an enhancement of 5~10 dB of spurious response.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.161-167
• /
• 2017

Recently, small radar has been reduced in size and power consumption to cope with various operating environments. It also requires the development of a small millimeter wave radar with high range resolution to disable the system of target with a single strike. In this paper, we design and implement a signal processor that can be used in small millimeter wave radar. The signal processor for the small millmeter wave radar is designed with a digital IF(Intermediate Frequency) receiver and DFT(Discrete Fourier Transform) module capable of real time FFT operation for miniaturization and low power consumption. Also it was to leverage the FPGA(Field Programmable Gate Array) and DAC(Digital Analog Converter) as a means for correcting the distortion of signals that can occur in the receive path of the small millimeter wave radar to create a RF signal that is used by the system. Finally, we verified the signal processor presented through performance test

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.331-339
• /
• 2010

To analyze and verify the performance of a MWR(Missile Warning Radar) of a GVWS(Ground Vehicle Weapon System), there is a need to make a simulator which can conduct the linked and engaged test virtually using the simulated signals. In this paper, a method of the simulator design for MWR is proposed to solve the above need. The SP(Signal Processor) part which generates the simulated signals and analyzes the algorithms is explained. The RF(Radio Frequency) part which transforms IF(Intermediate Frequency) signals into RF signals, radiates RF signals, and controls the linked equipments is also explained. The utility of the proposed design is proved by presenting the results of the contributions to the development of MWR.