• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.883-886
• /
• 2005

This paper proposed a wireless measurement system (WMS) for an effective condition monitoring using wireless communication. WMS consists of two parts: transmitter(TM) acquired a dynamic signal from physical system using ICP type accelerometer sensor. An acquired signal modulated through the low/high pass filter and amplifier in DAQ board, which converted to digital signal. Embedded board(E-board) transferred digital signals to base station(BS) through the socket IEEE.802.11.b. BS is adopted IOCP server structure. Because it can acquired signal well during transferred digital signal. Signal processing used LabVIEW Library, BS(server) designed to realize multi-thread using visual C++.NET for 1 many meaning data processing

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.409-414
• /
• 2008

In mobile ad hoc networks, most of on demand routing protocols such as DSR and AODV do not deal with traffic load during the route discovery procedure. To solve the congestion and achieve load balancing, many protocols have been proposed. However, the existing load balancing schemes has only considered avoiding the congested route in the route discovery procedure or finding an alternative route path during a communication session. To mitigate this problem, we have proposed a new scheme which considers the packet bursting mechanism in congested nodes. The proposed packet bursting scheme, which is originally introduced in IEEE 802.11e QoS specification, is to transmit multiple packets right after channel acquisition. Thus, congested nodes can forward buffered packets promptly and minimize bottleneck situation. Each node begins to transmit packets in normal mode whenever its congested status is dissolved. We also propose two threshold values to define exact overloaded status adaptively; one is interface queue length and the other is buffer occupancy time. Through an experimental simulation study, we have compared and contrasted our protocol with normal on demand routing protocols and showed that the proposed scheme is more efficient and effective especially when network traffic is heavily loaded.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.42-51
• /
• 2003

In this paper, we are going to analyze on relation of an output spectrum along phase distortion of power amplifier in wireless LAN system, and then considered an ACPR characteristic of power amplifier and consideration of an OFDM method for this. Also, we did implementation for OFDM modulation and transmission section of an IEEE 802.11a standard to have transmission speed of the maximum 54Mbps in order to know an OFDM modulation method and relation of non-linear characteristic of power amplifier. The non-linear characteristic of power amplifier did modeling with AM-to-AM and AM-to-PM, and we analyzed an output spectrum characteristic along phase distortion composed input signal supply for power amplifier. When output spectrum analysis results phase distortion increased, and an AM-to-PM characteristic of power amplifier in 5 degrees, the output spectrum was satisfied with a demand spectrum in P1 dB, but 10-20 degrees were able to confirm what cannot be satisfied with a demand spectrum in phase distortion. Also, an output spectrum of power amplifier by frequency re-growth generated by a non-linear characteristic of power amplifier did not satisfied in P1dE. therefore, a back-off value was requested according to an AM-to-PM distortion degree, and smaller back-off value were able to know what demand became in case of modulation section that used OFDM.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.237-239
• /
• 2004

Wireless LAN Voice over IP(VoIP) equipment needs Quality-of-Service(QoS) with priority for processing real-time traffic. This paper shows transmit function implementation of wireless LAN(WLANs) media access control(MAC) support VoIP, and it has an advantage of guarantee of QoS and is adaptable to VoIP or mobile wireless equipment. The IEEE 802.11e standard in progress has four queues according to four access categories(AC) for transmit and the MAC transmits the data based on EDCA. The value of AC is from AC0 to AC3 and AC3 has the highest priority. The transmit method implemented at this paper ensure QoS using one transmit FIFO in hardware since real-time traffic data and non real-time traffic data has the different priority. The device driver classifies real-time data and non real-time data and transmit data to hardware with information about data type. The hardware conducts shorter backoff and selects faster AIFS slot for real-time data than it for non real-time data. Therefor It make give the real-time traffic data faster channel access chance than non real-time data and enhances QoS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3458-3474
• /
• 2014

The performance of IEEE 802.11e enhanced distributed channel access (EDCA) is influenced by several interactive parameters that make quality of service (QoS) control complex and difficult. In EDCA, the most critical performance influencing parameters are the arbitration interframe space (AIFS) and contention window size (CW) of each access category (AC). The objective of this paper is to provide a scheme for parameter control such that the throughput per station as well as the overall system throughput of the network is maximized and controllable. For this purpose, a simple and accurate analytical model describing the throughput behavior of EDCA networks is presented in this paper. Based on this model, the paper further provides a scheme in which a Pareto optimal system configuration is obtained via an appropriate CW control for a given AIFS value, which is a different approach compared to relevant papers in the literature that deal with CW control only. The simulation results confirm the effectiveness of the proposed method which shows significant performance improvements compared to other existing algorithms.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.149-152
• /
• 2011

본 논문에서는 무선 메쉬 네트워크에서 H.264 비디오 코딩을 이용한 대화형 멀티미디어 전송시 서비스 품질을 향상시키기 위한 Early Drop 기법을 제안한다. Early Drop 기법은 비디오 프레임의 재생시간과 H.264로 부호화된 비디오 프레임의 중요도를 고려하여 네트워크 혼잡 시 발생하는 큐잉 지연과 큐 오버플로우로 인한 비디오 서비스 품질 저하를 효과적으로 개선하기 위해 개발되었다. 계층간 최적화(Cross-Layer)기법을 사용하여 각 비디오 패킷 별로 재생시간까지 남은 시간을 의미하는 delay budget을 할당하고 전송 중 재생시간 초과로 인해 목적지 노드에서 재생되지 못하는 비디오 패킷을 전송 초기 손실 시켜 무선대역폭 낭비와 전송 지연을 최소화 한다. 또한, H.264 비디오 프레임 종류별 중요도를 고려하여 차별화 된 delay budget을 할당해 중요도가 높은 비디오 프레임의 전송을 보장하여 비디오 전송 품질을 높인다. 성능 검증을 통해 네트워크 혼잡 시 Early Drop 기법은 기존에 제안된 IEEE 802.11e 기반의 H.264 비디오 전송기법과 비교하여 전송지연과 프레임 손실률을 최소화해 향상된 비디오 품질을 보였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.117-130
• /
• 1999

In this paper, the performance of data communication function of military radio equipment P-999K is analyzed based on the standard CSMA/CA protocol which is DFWMAC standard protocol done by IEEE802.11 work group. Basic three standard protocols, i.e. Basic CSMA/CA, Stop & Wait ARQ and 4-Way Handshake CSMA/CA protocols are analyzed and compared with each other under the hidden terminal environment. The computer simulation is also done by using SIMSCRIPT II.5 which is popular software tool for an independent processing. The results show that p-persistent(with p=0.3) CSMA scheme is superior to non-persistent CSMA scheme with non-hidden terminal condition, but the performances of both schemes are almost same with hidden terminal situation. And the results of computer simulations are also showed that Basic CSMA/CA protocol is superior to the other protocols when the ratio of hidden terminals is below 10 % of total user population, however, with the above 20% hidden terminals environment and the higher offered traffic conditions the 4-Way Handshake CSMA/CA protocol shows the most superior performance.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.387-389
• /
• 2015

IEEE 802.11e EDCA(Enhanced Distributed Channel Access)는 4개의 AC(Access Category)를 이용하여 트래픽에 따른 우선순위를 부여하고 QoS(Quality of Service)를 제공하기 위해 표준화되었다. EDCA는 이진 백오프 알고리즘을 갖는 CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) 방법을 이용한다. EDCA에서 패킷 전송에 실패할 경우 경쟁 윈도우 값은 두 배씩 증가 되고, 성공할 경우에는 최소 경쟁 윈도우 값으로 초기화된다. 따라서 경쟁 윈도우 값이 최적의 값을 유지하지 못해 많은 패킷 충돌을 야기하여 네트워크 성능을 감소시킨다. 이 문제를 해결하기 위해 기존에 제안된 논문에서는 패킷 전송 성공 후 경쟁 윈도우 값을 최소 경쟁 윈도우 값이 아닌 채널 혼잡 정도에 따라 계산된 값으로 설정한다. 그러나 이 방법은 트래픽 종류와 상관없이 같은 방법으로 동작하기 때문에 트래픽 종류에 따른 차별적 QoS를 보장하지 않는다. 또한 계산된 경쟁 윈도우 값은 현재 값에 비해 상대적으로 낮은 값을 갖기 때문에 여전히 높은 충돌율을 갖는다. 본 논문에서는 이 문제를 해결하기 위해 새로운 프로토콜을 제안한다. 제안된 방법에서는 네트워크의 혼잡 정도를 잘 반영하기 위한 새로운 경쟁 윈도우 계산 알고리즘을 제시한다. 또한 제안된 알고리즘은 트래픽 종류에 따른 QoS 보장을 위해 트래픽 종류에 따른 차별화 파라미터를 이용한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.91-96
• /
• 2006

High efficiency switching mode circuits such as class I amplifiers have been well known in the MHz frequency range. The class E amplifier is a type of switching mode amplifier offering very high efficiency approaching 100%. In this paper, the class E amplifier has been designed by using the harmonic balance method of circuit simulator. The designed amplifier is realized by using pHEMT and microstrip line, shows 66% power added efficiency (PAE) at 2.4GHz with 17.6dBm output power. With -3dBm input power of wireless LAN, measured output spec01m can meet the required IEEE 802.11g standard spectrum mask. That means the required amplifier back off of 9dB from $P_{ldB}$ to satisfy the required wireless LAN spectrum mask.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.172-178
• /
• 2023

When the mobile device moves from the coverage of one access point to the radio coverage of another access point it needs to maintain its connection with the current access point before it successfully discovers the new access point, this process is known as handoff. During handoff the acceptable delay a voice over IP application can bear is of 50ms whereas the delay on medium access control layer is high enough that goes up to 350-500ms. This research provides a suitable methodology on medium access control layer of the IEEE 802.11 network. The medium access control layer comprises of three phases, namely discovery, reauthentication and re-association. The discovery phase on medium access control layer takes up to 90% of the total handoff latency. The objective is to effectively reduce the delay for discovery phase to ensure a seamless handoff. The research proposes a scheme that reduces the handoff latency effectively by scanning channels prior to the actual handoff process starts and scans only the neighboring access points. Further, the proposed scheme enables the mobile device to scan first the channel on which it is currently operating so that the mobile device has to perform minimum number of channel switches. The results show that the mobile device finds out the new potential access point prior to the handoff execution hence the delay during discovery of a new access point is minimized effectively.