• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.469-477
• /
• 2015

In this paper, joint spatial division and reuse (JSDR) scheme is proposed for maximizing network throughput in densely-deployed wireless local area networks equipped with massive antenna array. The proposed JSDR scheme divides the massive spatial space into two subspaces: one is for suppressing the interference from the neighboring access points and another is for sensing the carrier sensing and transmitting the information-bearing signals to intended stations. By using computer simulation, the proposed JSDR can provide 133% higher network throughput, compared to the carrier sensing technique defined in the IEEE 802.11 standard so that the proposed JSDR is suitable for the next generation WLAN systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.1
• /
• pp.17-28
• /
• 2014

The increase of smartphone users have made mobile carriers offload increasingly congested traffic of 3/4G by providing Wi-Fi hot-spots in the public places such as coffee shops and subway stations. In the traditional authentication in WLAN, the users should convince the service providers that they are valid customers before they use WLAN services. Since the authentication protocol is designed for service providers. Even with the mutual authentication based on the IEEE 802.1X, which is supported by IEEE 802.11 standard, it is difficult to be convinced of that the service providers really have installed the WLAN APs, which users are confronted with. An attacker can install rogue APs that masquerade as legitimate APs by copying the SSID, MAC address, etc. in order to obtain users' private information. In this paper, we introduce a method of authenticating legitimate APs for smartphone users. And we show our proposal can be well utilized for the current Wi-Fi hot-spots as a security plug-in and prove it through our experiments.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.576-580
• /
• 2006

Snoop 프로토콜은 무선 랜 환경에서 발생하는 TCP 패킷 손실을 효과적으로 보상하여 TCP 전송률을 향상시킬 수 있는 효율적인 프로토콜이다. 하지만, 무선 링크에서 Burst loss가 발생하는 경우에는 지역 재전송을 효과적으로 수행하지 못하여 전송 효율이 떨어진다는 문제점이 있다. 본 논문에서는 Snoop 프로토콜의 이러한 문제점을 개선하기위해 cross layer 기법을 적용한 지역 재전송 기법인 $A^2Snoop$ (ARQ Assistance Snoop) 프로토콜을 제안한다. $A^2Snoop$ 프로토콜은 현재 무선 랜 환경에서 가장 널리 사용되는 IEEE 802.11 MAC 프로토콜 기반의 지역 재전송 메커니즘으로서, MAC 계층의 ARQ 기법의 메시지와 새로이 제안된 지역 재전송 타이머에 의해 효율적인 재전송을 수행한다. ns-2 시뮬레이터를 이용한 실험을 통해 $A^2Snoop$의 지역 재전송 기법은 무선 구간의 Burst loss에 대해 효율적인 보상을 수행하며, 이동 단말의 에너지 효율성을 향상시키는 것을 확인할 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.33-43
• /
• 2010

Recently, users want to use real-time multimedia services, such as internet, VoIP, etc., using their IEEE 802.11 wireless lan mobile stations. In order to provide such services, a handoff among access points is essential to support the mobility of a node, in such an wide area. However, the legacy handoff methods of IEEE 802.11 technology are easy to lose connections. Also, the recognition of a disconnection and channel re-searching time make the major delay of the next AP to connect. In addition, because IEEE 802.11 decides the selection of an AP depending only on received signal strength, regardless of a node direction, position, etc., it cannot guarantee a stable bandwidth for communication. Therefore, in order to provide a real-time multimedia service, a node must reduce the disconnection time and needs an appropriate algorithm to support a sufficient communication bandwidth. In this paper, we suggest an algorithm which predicts a handoff point of a moving node by using GPS location information, and guarantees a high transmission bandwidth according to the signal strength and the distance. We implemented the suggested algorithm, and confirmed the superiority of our algorithm by reducing around 3.7ms of the layer-2 disconnection time, and guaranteed 24.8% of the communication bandwidth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.876-884
• /
• 2014

A hardware design of LDPC decoder which is based on the improved normalized min-sum(INMS) decoding algorithm is described in this paper. The designed LDPC decoder supports 19 block lengths(576~2304) and 6 code rates(1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6) of IEEE 802.16e mobile WiMAX standard and 3 block lengths(648, 1296, 1944) and 4 code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. The decoding function unit(DFU) which is a main arithmetic block is implemented using sign-magnitude(SM) arithmetic and INMS decoding algorithm to optimize hardware complexity and decoding performance. The LDPC decoder synthesized using a 0.18-${\mu}m$ CMOS cell library with 100 MHz clock has 284,409 gates and RAM of 62,976 bits, and it is verified by FPGA implementation. The estimated performance depending on code rate and block length is about 82~218 Mbps at 100 MHz@1.8V.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.112-121
• /
• 2011

The IEEE WAVE standard specification does not support handover operation since it is designed to transmit mainly the ITS-related messages that are limited in length. More advanced multimedia applications such as Internet browsing and streaming of video clips produced by CCTVs, however, require handover support such that a sequence of data packets can be received seamlessly while an OBU's association with the RSUs changes. This paper presents a new handover scheme that can operate without performance degradation in the cases where there are multiple RSUs in the areas of handover by making use of the IEEE 802.11f IAPP Move-notify messages, based on the fast handover scheme with proactive caching by disassociation messages introduced previously. Experimental results from the simulation shows that the proposed handover scheme outperforms the scheme based solely on multicast.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1996-2001
• /
• 2006

Open System Authentication Method, Shared Key Method, Mac Based Authentication Method are very hard to use in wireless network that needs security. So now, many researches have been performed about 802.1x and user authentication method applying PKI. but certificate verification protocol has been used abolished list called CRL since it's first usage of PKI, there were still has a problem about distribution point. This paper applied CVS to use CA direct not to use CRL and OSCP server in order to improve this problems. Also It suggested the system that can make authentication steps more shorter using authentication server and Mutual authentication system by public certificate(small size/low speed wireless terminal can access to wireless network fast and safely)

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.75-80
• /
• 2006

This paper has proposed a novel dual band transmitter module which can be operating either as an amplifier or as a frequency multiplier according to the input frequency. A conventional dual band transmitter consists of separate amplifiers operating at each frequency band, but the proposed dual band module operates as an amplifier for the IEEE 802.11b/g signal, and as a frequency doubler for the IEEE 802.11a signal according to input frequency and bias voltage. In this paper, we have obtained sharp stop band characteristics by using microstrip DGS(Defected Ground Structure) to suppress the fundamental frequency of the frequency doubler as well as the second harmonic of the amplifier. From measurement result, second harmonic suppression is below -59dBc in the amplifier mode, and fundamental suppression is below -35dBc in the frequency doubler mode. And the designed module has 17.8dBm output P1dB at 2.4GHz and 10.1dBm power for 5.8GHz output, and the output power in the two modes are 0.8dB and 2.8dB larger than the module with ${\lambda}g/4$ reflector, respectively.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.205-208
• /
• 2005

본 논문에서는 IEEE 802.11a 무선 랜에서 burst error에 대한 에러 정정 코드로 사용되는 블록 인터리버의 설계방법을 제안한다. 블록 인터리버 메모리는 읽기 쓰기의 주소가 다르기 때문에 주소생성을 하기 위한 회로가 복잡해진다. 본 논문에서 제안하는 방법은 블록 인터리버의 설계에서 사용되는 $16{\times}18$ 크기의 메모리를 세분화하여 데이터를 읽어 들일 때 쓰이는 롬이나 복잡한 로직을 제거하거나 메모리 선택기를 추가하여 보다 간소화된 주소 생성 모듈을 설계하여 로직의 효율을 높인다.

• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1323-1332
• /
• 2009

In this paper, we analyze security weakness of 4-Way Handshake in IEEE 802.11i and propose fast and secure 2-Way Handshake mechanism. Compute PTK(Pairwise Transient Key) using sequence number instead of random numbers in order to protect Replay attack and DoS attack. Also, proposed 2-Way Handshake mechanism can mutual authenticate between mobile station and access point and derive PTK using modified Re-association Request and Re-association Response frames. And, compare with others which are fast and secure Handoff mechanisms.