• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2002

본 논문은 현재 무선 LAN 환경에서 적용되고 있는 매체접근제어 프로토콜인 IEEE 802.11 CSMA/CA를 이용함으로써, 음성 위주의 항공이동통신에서 음성과 데이터 채널을 통합하여 사용하도록 하고 있다. 또한, 표준으로 제정되어 있는 기존의 CSMA/CA 매체접근제어 프로토콜에 대한 이해를 바탕으로 성능 개선 방안을 제안하였으며, 이를 바탕으로 채널 효율을 향상시켰다. IEEE 802.11 매체접근제어(MAC, Medium Access Control) 프로토콜은 데이터 유형에 따라 채널을 두 개의 구간(PCF와 DCF 구간)으로 나누어 전송하도록 하고 있다. 본 논문에서는, 데이터 유형별로 적용되는 구간 중, DCF 구간에서의 패킷간의 충돌 가능성을 줄임으로써 데이터 전송 효율을 높이는데 주안점을 두고 있다. 제안 방안으로는 경쟁 구간에서의 전송에서 충돌에 따른 손실을 보완할 수 있도록 Wireless Window Protocol(이하, WWP)을 적용한 후 전송 과정을 제어하였다. Hidden 터미널의 영향이 적으므로 가시권내 통신에 적합한 기존의 2-Way CSMA/CA 프로토콜을 항공통신에 적용하여 상태 천이 과정을 5개에서 6개로 세분화하였고, 주어진 확률에 의하여 나누어진 두 개의 그룹별로 상태 천이 과정을 다르게 적용하였다. 따라서, 채널이 한 항공기에 의해 점유되는 PCF를 제외한, DCF 구간에서의 데이터 전송 효율을 높일 수 있었다. 시뮬레이션은 채널 대역폭과 패킷 크기 등을 파라미터 값으로 하여 수행하였으며, 시뮬레이션 결과 CSMA/CA에 비해 새로 제안한 알고리즘이 데이터 전송 과정에서 발생하는 충돌 가능성을 감소시킴으로써 성능이 향상됨을 알 수 있었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.13-25
• /
• 2008

In this paper, we propose the Location Awareness System adjusting Ranging Technology for CSS(Chirp Spread Spectrum) which is adopted on 2.45GHz standard in IEEE 802.15.4a and TOA(Time-of-Arrival) algorithm. The conventional methods have adopted RSSI, ultrasonic waves and infrared rays in Zigbee. RSSI measures strength indication of received signal and recognizes the position of nodes in RF boundary. However, this technology has the following problems; lots of error by the change of the channel environment and much power consumption. In this paper, adopting chirp pulse on 2.45GHz standard in IEEE 802.15.4a and SDS-TWR(Symmetrical Double Side-Two Way Ranging) method using the characteristic of Spread Spectrum, a new Location Awareness System is suggested. The distance and the coordinate are measured within ${\pm}\;5cm$ by TOA(Time of Arrival) algorithm and proposed algorithm and the data in error rate is decreased less than 1%. Through these results, the algorithm suggested in this paper is verified for its performance in a computer simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1106-1113
• /
• 2005

This paper presents a dual-band mixer for multi-standards of IEEE 802.1la/b/g using a single local oscillator, so as to improve the defects of legacy systems. Those systems have duplicate local oscillators and mixers to handle dual band signals, increasing complexity of system and power loss. The proposed circuit shows 11.6 dB, 16.8 dB of conversion loss and 8.77 dBm, 12.5 dBm of IIP3(Input 3rd Intercept Point) for respective bands when the two RF inputs of 2.452 and 5.260 GHz are down-converted to the identical 356 MHz If frequency. The RF-LO isolations are measured 36 dB, 41 dB at each frequencies and over 50 dB of LO-IF isolations are achieved at all cases.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.2
• /
• pp.98-101
• /
• 2007

A fully integrated 5-GHz CMOS power amplifier for IEEE 802.11a WLAN applications is implemented using $0.18-{\mu}m$ CMOS technology. An on-chip transmission-line transformer is used for output matching network and voltage combining. Input balun, inter-stage matching components, output transmission line transformer and RF chokes are fully integrated in the designed amplifier so that no external components are required. The power amplifier occupies a total area of $1.7mm{\times}1.2mm$. At a 3.3-V supply voltage, the amplifier exhibits a 22.6-dBm output 1-dB compression point, 23.8-dBm saturated output power, 25-dB power gain. The measured power added efficiency (PAE) is 20.1 % at max. peak, 18.8% at P1dB. When 54 Mbps/64 QAM OFDM signal is applied, the PA delivers 12dBm of average power at the EVM of -25dB.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.35-40
• /
• 2011

In this paper, we analyze that co-channel interference mitigation algorithms MMSE (Minimum Mean Square Error), OC (Optimal Combining), ML (Maximum Likelihood) using 2.4Ghz in WBAN (Wireless Body Area Network) system. Also analyze that scenario and channel model by IEEE 802.15.6. ML gives the best performance for all simulation. ML and OC have high complexity than MMSE complexity, because these algorithms should be known channel information of interference users. So these algorithms are difficult to apply to WBAN. Therefore we will study the interference mitigation algorithm that should be accomplished trade-off of between efficiency and complexity.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.1
• /
• pp.46-53
• /
• 2012

The WBAN technology means a short distance wireless network which provides each device's interactive communication by connecting devices inside and outside of body located within 3 meters. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. It is necessary to develop the WBAN core technology that sensor node device, WBAN middleware and WBAN application service for WBAN environment. In this paper we designed the medical message structure and implemented medical application for purpose of vital information reliability. The message structure was proposed for WBAN environment and application can be check biometric information from BN on smart device through WBAN gateway.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.41-52
• /
• 2005

In wireless networks there are various errors, caused by multi-path fading and interference between devices which lower the network Performance. Especially, performance of IEEE 802.IS.3 High-Rate WPAN (Wireless Personal Area Network) which is operated in ISM unlicensed frequency band is easily affected by channel errors. In this paper, we propose a scheduling algorithm which takes channel errors into consideration in scheduling asynchronous data traffic. The proposed scheduling algorithm can allocate CTA(Channel Time Allocation) proportionally in accordance with the requested channel time of each device. It also prevents waste of channel time by allocating CTA of the channel-error devices to other channel-error free devices. After recovering from the channel error, the devices are compensated as much as they conceded during channel error status. Simulation results show that the proposed scheduling algorithm is superior to the existing SRPT(Shortest Remain Processing Time) and RR(Round Robin) in throughput and fairness aspects.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.714-719
• /
• 2009

In this paper, a compact antenna with band-rejected characteristic for Ultra-Wideband(UWB) applications is proposed. The designed antenna not only shows sufficient impedance bandwidth but has band-rejected characteristic for the frequency band of 5.15~5.825GHz limited by IEEE 802.11a and HIPERLAN/2. To obtain both properties of wideband band rejection, the techniques of a partial ground plane and embedded thin U-slot into planar radiator are used respectively. A designed antenna satisfied a VSWR less than 2:1 for the frequency band of 3.1~10.3GHz with band rejection of 4.90~5.92GHz.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.1
• /
• pp.38-44
• /
• 2021

Wi-Fi provides some low-power connection solutions that other Bluetooth cannot provide, and at the same time brings many benefits. First, there is a potentially higher data rate: it can reach 230mbps. Wi-Fi coverage is also wider than competitors, and its operating frequency is also 5GHz, which is much less congested than 2.4GHz. Finally, it also supports IP networks, which is important if you want to send data to the cloud without complexity. The 802.11ac standard of the previous generation still accounts for most shipments (80.9%) and revenue (76.2%). However, there is a limit to accepting IoT devices that will continue to increase significantly in the future. To solve this problem, the new Wi-Fi 6 standard is expected to be the solution (IEEE 802.11ax) which is quickly becoming the main driving force of the wireless local area network (WLAN) market. According to IDC market research analysts, in the first quarter of 2020, independent access points (APs) supported by Wi-Fi 6 accounted for 11.8% of shipments, but 21.8% of revenue. In this paper, we have compared and analyzed the IoT connectivity, QoS, and security requirements of devices using Wi-Fi 6 network.

• The Journal of Information Technology
• /
• v.6 no.3
• /
• pp.65-73
• /
• 2003

The evaluation AP embedded Linux board is implemented. The board is made of IBM 405 GP processor, PPCBoot-1.2.1 boot loader, Linux-2.4.21 kernel and root file system. The evaluation board has two flash memories, boot flash and application flash of size 512Kbyte and 16Mbyte, respectively. And it supports IEEE 802.11a which provide the maximum throughput of 54Mbps in the 5.2GHz frequency band. MTD(Memory Technology Device) and JFFS2(Journalling Flash File System version 2) technologies are adopted to optimally package the system software, boot loader, kernel and root file system. And in order to optimize root file system, busybox package and tiny login are used. Linux kernel and root file system is combined together with mkimage utility.