• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.302-310
• /
• 2018

To realize the self-driving technology, there have been various system designs based on the related V2X standards, especially the IEEE 802.11p and WAVE standard supporting the WLAN V2X communication. On the other hand, the new standard IEEE 802.11ba defining supplementary wake-up radio operation is now under standardization targeting the low power operation, and it includes the V2P operation in use cases. However, if IEEE 802.11ba is used with the IEEE 802.11ba for V2X operation, the additional transmission procedure of wake-up frame in IEEE 802.11ba may cause the congestion problem and fails to meet the delay requirement. In this paper, the system structure of the combination of IEEE 802.11ba with the 802.11p is studied. In addition, based on the analysis and simulation, the considerations and improvements for effective low-power V2P communication in future self-driving technology using IEEE 802.11ba are proposed.

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.943-949
• /
• 2009

In this paper, the 5.9GHz WAVE(Wireless Access in Vehicular Environments) channel modeling is used by the Jakes channel model for the suitability of the fast wireless channel fluctuation. The performance analysed the fading signal constellation and the spectrum in the IEEE 802.11p spectrum mask, the Doppler effect, the modulation scheme. In addition, the vehicular speed, exactly the performance analysis the WAVE communication systems follow the Doppler effect.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.76-83
• /
• 2011

The IEEE WAVE-based communication systems do not provide handover services since most of the application layer messages of a small amount containing text data that are related to safe driving. Multimedia data service such as web pages and CCTV video clips, however, require a seamless handover for continuation of a session via multiple RSUs. In this paper, we propose a new proactive handover protocol based on IEEE WAVE. According to the proposed handover protocol, the OBU notifies the old RSU of its departure from the coverage such that the old RSU forwards to the new RSU the data heading towards the OBU to be cached for the further delivery upon its entry into the new RSU's coverage. The simulation results are presented which shows the performance of the proposed protocol in terms of throughput, delivery ratio and handover delay.

• Journal of information and communication convergence engineering
• /
• v.18 no.2
• /
• pp.88-93
• /
• 2020

The IEEE 802.11p-based wireless access in vehicular environments (WAVE) [1] communication is a method used exclusively for wireless communication on the road. This technique enables information sharing not only among moving vehicles but also between vehicles and infrastructure [2]. As part of WAVE communication, data is transmitted to and from vehicles in motion; in this case, it is difficult to determine the channel accurately in an outdoor environment owing to the Doppler shift [3]. This paper proposes a new channel estimation scheme for enhancing the reception performance of the IEEE 802.11p-based WAVE system. The proposed technique obtains the initial channel value by estimating the least square in the time domain by inserting a pilot signal for channel estimation into the IEEE 802.11p virtual subcarrier. Subsequently, a least mean square algorithm is applied to the initial channel value to update the estimated channel value. The simulation results obtained using the proposed channel estimation technique confirm its remarkable efficiency.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.495-501
• /
• 2014

In this paper, we designed a diversity modem hardware architecture for IEEE802.11p WAVE and tested the modem on the road with car attached shark antenna. One of the dual channel modem and the diversity single modem with maximum ratio combining algorithm can be selected on the designed architecture. The designed modem have been implemented on the Xillinx Kintex7 FPGA. We tested the modem performance on the smart highway experience road. As experimental results, we can verify the performance of the diversity modem on real road and the enlarged communication range by more than 30%.

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.183-185
• /
• 2005

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.326-329
• /
• 2008

현재 IEEE 802.11p 규격은 기존의 IEEE 802.11a 규격을 기반으로 하여 표준화가 진행되고 있다. 기존의 IEEE 802.11a 규격은 무선랜 (WLAN: Wireless Local Area Network) 규격으로서 고속으로 이동하는 차량 통신환경 즉 WAVE (Wireless Access for Vehicular Environment) 환경에 그대로 작용할 경우 수신 성능이 급격히 떨어지게 되 는 문제점이 있다. 본 논문에서는 긴 훈련 심볼 (LTS: Long Training Sequence)을 이용하는 기존의 채널 추정 기법을 기반으로 하되 WAVE 채널처럼 빠르게 변화하는 채널에 대응하기 위해 일정한 심볼 주기 마다 미드엠블 (Mid-Amble)을 삽입하는 전송구조를 제안한다. 또한, 미드엠블 사이의 심볼들의 위상과 크기를 3차원 스플라인 보간법을 적용하여 추정하는 알고리듬을 제안한다. 제안된 알고리듬의 성능실험을 위해 WAVE 채널을 모델링하였으며 이러한 채널에서 성능실험을 수행하였다. 실험결과에 의하면 제안된 알고리듬은 빠른 시변 채널에서도 매우 우수한 성능을 나타냄을 알 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1691-1699
• /
• 2014

IEEE developing WAVE specifications are able to support V2V and V2I wireless communications, and these functionalities can be used to enhance vehicle operational safety. To overcome any security weaknesses that are inherent in wireless communications, WAVE specification should support message encryption and authentication functions. In this study, we have implemented WAVE security algorithms in IEEE P1609.2 with openssl library and C language. We have verified the normal operation of implemented software, using the test vectors of related specifications, and measured their performance. Our software is platform independent, and can be used for the full implementation of WAVE specification.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.568-577
• /
• 2017

IEEE Std 1609.2 was defined for the support of communication security functions in the WAVE (Wireless Access in Vehicular Environments) system. IEEE Std 1609.2 defined the message structures of the security services and managements on the vehicular communication by using ASN.1 (Abstract Syntax Notation One). Also, this security message structures shall be encoded using the COER (Canonical Octet Encoding Rules). In this paper, we designed and implemented the IEEE Std 1609.2 message encoder/decoder handling the security messages defined in IEEE Std 1609.2. The designed encoder/decoder consists of three modules as follows : a module generating the message of C language data structures in accord with IEEE Std 1609.2 message structures, a message encoder module, a message decoder module. And the encoder/decoder was implemented on the Linux environment. Also we analyzed the performance by measuring the performance speed of the encoder/decoder implemented.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.111-116
• /
• 2012

Vehicular communication is one of main convergence technologies which combines information and communication technology (ICT) with vehicle and road industries. In general, vehicular communication adopts IEEE 802.11p standard which is commonly referred as wireless access in vehicular environments (WAVE). In this paper, we investigate a multi-hop communication scheme for IEEE 802.11p based communication systems which support both vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communications. First, we briefly overview the performance of IEEE 802.11p based communication systems. Then, a multi-hop communication scheme is introduced for both broadcast and unicast. The performance of proposed scheme is presented via experimental measurements.