• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.865-868
• /
• 2007

Recently, wireless LANs are often applied in home or office because of its various of convenience. Frequency range of wireless LANs specified by IEEE 802.11b is at 2.4 GHz. The bluetooth, the microwave oven, and the PDA(Personal Digital Assistants) uses, however, the same frequency band. So problems will be produced in these environments, such as multi-pass interference and system-to-system interference. These problems can be eliminated by using EM wave absorber. In this paper, we designed and fabricated EM wave absorber using MnZn-Ferrite, Sendust, and CPE( Chlorinated Polyethylene). The EM wave absorber with the ratio of material (MnZn-Ferrite : Sendust : CPE = 64 : 16 : 20 wt.%) has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.12
• /
• pp.1204-1208
• /
• 2014

As required performance of UAV (Unmanned Aerial Vehicle) becomes more complex and complicated, required positioning accuracy is becoming more and more higher. GPS is a reliable world wide positioning providing system. Therefore, UAV generally acquires position information from GPS. But when GPS is not available such as too weak signal or too less GPS satellites environments, UAV needs alternative positioning system such as network positioning system. RSSI (Received Signal Strength Indicator) based positioning, which is one method of network positioning technologies, determines its position using RSSI measurements containing distance information from AP (Access Point)s. In that method, a selected AP's configuration has strong and tight relationship with its positioning errors. In this paper, for, we additionally account AP's configuration information by adopting DOP (Dilution of Precision) into AP selection procedures and provide more accurate RSSI based positioning results.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.427-429
• /
• 2004

최근 광대역 멀티미디어 서비스에 대한 관심이 HD(High Density)방송의 시작과 함께 고조되고 있다. WPEG(Moving Picture Experts Group) HD 방송 채널을 수용하기 위해서 요구되는 방송대역은 20Mbps로 현재 가입자 망으로 한계를 가지고 있다. 궁극적인 해결 방안으로 FTTH(Fiber To The Hone) 광 가입자망이 논의되고 있다. 광 가입자 망의 유력한 방법중의 하나가 Gigabit Ethernet PON으로 IEEE(Institute of Electrical and Electronics) 802.3 EFH(Ethernet First Mile) AH Group을 중심으로 표준화 진행 중에 있다. IEEE 802.3 EFM AH Group에서는 가입자 망 장애에 대한 Protection 링크 이중화가 고려되고 있지 않아 본 논문에서 Gigabit Ethernet PON에서 링크 이중화 방법을 제시 하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.19-20
• /
• 2018

This paper distinguish between the types of LANs used to connect the internet used by many in the fourth industrial era and compare speeds. 802.11 is fastest and it's running at 300Mbps. And second fastest is running at 54Mbps. In compare second, 802.11n is faster second at six times. So we can prediction the wireless lan's transmission speed will be faster in future.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.19-28
• /
• 2011

The safety applications based on the IEEE 802.11p, periodically transmit the safety-related information to all surrounding vehicles with high reliability and a strict timeline. However, due to the high vehicle mobility, dynamic network topology and limited network resource, the fixed beacon scheduling scheme excess delay and packet loss due to the channel contention and network congestion. With this motivation, we propose a novel beacon scheduling algorithm referred to as spatial-aware(SA) beacon scheduling based on the spatial context information, dynamically rescheduling the beaconing rate like a TDMA channel access scheme. The proposed SA beacon scheduling algorithm was evaluated using different highway traffic scenarios with both a realistic channel model and 802.11p model in our simulation. The simulation results showed that the performance of our proposed algorithm was better than the fixed scheduling in terms of throughput, channel access delay, and channel load. Also, our proposed algorithm is satisfy the requirements of vehicular safety application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1224-1230
• /
• 2007

Recently, wireless LAN are often applied in home or office because of its various of convenience. Frequency rage of wireless LAN specified by IEEE 802.11a is at 5.2 GHz and IEEE 802.11b is 2.4 GHz. But in offices with wireless LAN devices, reflection of waves against walls, ceilings, floors and desks made of metal creates multipath problems that reduce communication speed and lose data. These problems can be solved by using EM wave absorber. In this paper, we designed and fabricated EM wave absorbers using MnZn-ferrite, sendust, carbon and CPE(Chlorinated Polyethylene). The EM wave absorber with the ratio of MnZn-Ferrite : sendust : CPE=64 : 16 : 20 wt.% has thickness of 3.7 mm and absorption ability more than 17 dB at 2.4 GHz and the EM wave absorber with the ratio of MnZn-ferrite : carbon : CPE=40 : 15 : 45 wt.% has thickness of 3.8 mm and absorption ability more than 23 dB at 5.2 GHz.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.84-89
• /
• 2014

Worldwide Interoperability for Microwave Access (WiMAX) is an efficient technology for 20th century communication system. The technology provides broadband speed without the need for cables and is based on the IEEE 802.16 standard(also called Wireless MAN). Mobile WiMAX is defined as IEEE802.16e which is advanced and efficient technology for mobile telecommunication rather than GSM, CDMA technology. In this work link budget calculation for WiMAX have been done. Cell range have been calculated over digital modulations and they are BPSK, QPSK and QAM. Here different types of models like Cost 231 model have been used for different types of areas like open, rural and urban areas and Erceg-Greenstein model for sub-urban areas. Effect of various parameters like frequency, base station antenna height, transmission power and SNR over cell range have been studied. Analysis have done for both uplink and downlink.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.107-112
• /
• 2020

We analyze the flow aggregate (FA) based network delay guarantee framework, with generalized minimal interleaved regulator (IR) initially suggested by IEEE 802.1 time sensitive network (TSN) task group (TG). The framework has multiple networks with minimal IRs attached at their output ports for suppressing the burst cascades, with FAs within a network for alleviating the scheduling complexity. We analyze the framework with various topology and parameter sets with the conclusion that the FA-based framework with low complexity can yield better performance than the integrated services (IntServ) system with high complexity, especially with large network size and large FA size.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.307-311
• /
• 2010

Most wireless ad hoc networks use sender-centric carrier sensing where a data sender determines the transmission timing through channel assessment. However, sender-centric carrier sensing suffers from both exposed and hidden terminal problems even with physical and virtual carrier sensing. In this paper, we propose a new receiver-centric carrier sense (RCS) technique where a data receiver triggers packet transmission based on local channel assessment. Through both numerical analysis and simulation studies, we show that the proposed RCS achieves up to 20.9% higher throughput than previous receiver-centric approaches.

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.846-853
• /
• 2009

This paper presents the design of a high efficiency frequency multiplier with load-pull simulation and analyses the nonlinear distortion of the frequency multiplier. The frequency multiplier shows serious distortion of multiplying signal bandwidth because of nonlinearity when modulated signal is applied, so a digital predistortion with look up table (LUT) is applied to compensate for the distortion of the frequency multiplier. The frequency multiplier is designed to produce 5.8GHz output by doubling the input frequency to be operating at IEEE 802.11a standard wireless LAN. The output spectrum shows 12dB ACPR improvement both at +11MHz, +20MHz offset from center frequency after linearization.