• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.49-56
• /
• 2006

This paper describes the design and the verification of IEEE 802.15.4 LR-WPAN 2.4GHz Physical layer for Ubiquitous Sensor Network(USN). We designed the Carrier Frequency Offset(CFO) compensation satisfied the frequency tolerance of IEEE 802.15.4 LR-WPAN and the adaptive matched filter that re-setting of the threshold for the symbol synchronization of the various USN environment. The multiplications is reduced 1/16 by this method each other at i, q phases and has 0.5dB performance improvement in detection probability. Proposed baseband system is designed with verilog HDL and implemented using FPGA prototype board.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1877-1882
• /
• 2013

Smart Utility Network (SUN) is not only a core technology of intelligent green home networks but also a future technology which can be applicable to various areas instead of ZigBee. SUN should be compliment with IEEE 802.15.4g standard and can provide high link margin and stable communication data-rate for poor communication surrounding. This paper describes how to design the system simulation environment for the SUN RF transceiver, and also reports the required block-level specification for each circuit and various implementation impairments. Finally, the measured performances of the fabricated RF transceiver, which has utilized the system simulation results, completely satisfies the IEEE 802.15.4g SUN PHY standard.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.26-33
• /
• 2012

Please WBAN(Wireless Body Area Networks) is wireless communication of within 3 m radius from inside and outside of the body. WBAN is many uses IEEE 802.15.4 MAC protocol for WBAN MAC protocol requirements. IEEE 802.15.4 MAC protocol applies GTS(Guaranteed Time Slot) allocation scheme for guarantee packet delivery of application which requests QoS(Quality of Service). However, GTS allocation scheme of IEEE 802.15.4 MAC protocol uses FIFS(First In First Service) queueing. So it reduces data transmission reliability and has many problems. Therefore, IEEE 802.15.4 applies not WBAN MAC protocol for emergency data transmission. In this paper, we proposes a priority based MAC protocol for emergency data transmission in wireless body area networks. the proposal MAC protocol sets priority the data. So GTS reqeuest throughput of emergency data increasing and GTS allocation delay of emergency data decreasing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.239-246
• /
• 2013

The IEEE 802.15.4 offers standard about PHY and MAC layer and features low power, low bandwidth, and low speed data communication. Because of this reason, IEEE 802.15.4 is only within a limited range such as sensor detection and home network; nevertheless, the research about transmission multimedia data like voice packet through wireless sensor networks is conducted widely. In this paper, we proposed the group communication system based on the sensor network. TDMA/TDD MAC based on the IEEE 802.15.4 PHY for voice communication on the sensor network is designed by improvement existing peer-to-peer voice communication on the sensor network and hardware is implemented for group communication. To measure the quality of designed system, mean opinion score (MOS) is obtained from the experiment and verified by using sine wave method. As a result of an experiment, we expect that a many cases of application solution can be developed using presented system.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.219-227
• /
• 2011

The superframe structure of IEEE 802.15.4, an international standard for low rate WPAN, is composed of CAP(Contention access period) and CFP(Contention free period). CAP is the contention-based access period, while CFP is contention-free access period for supporting QoS by allocating fixed bandwidth. The standard can support QoS for only a few devices, because the maximum number of GTSs is 7. Furthermore, as the value of BO (Beacon order) or SO (Superframe order) increases, the size of a time slot increases. This makes it difficult to precisely allocate bandwidth for any device, because the bandwidth is allocated by the unit of GTS. The proposed scheme of this paper can reduce the waste of BW in CFP by adaptively reducing the size of a time slot in CFP as the value of BO or SO increases and increase the number of GTSs to 127 by modifying the standard. The performance analysis shows that the proposed scheme can dramatically increase the bandwidth utilization during the CFP when comparing with IEEE 802.15.4.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1789-1798
• /
• 2012

IEEE 802.15.4a standard can provide a variety of location-based services for ZigBee or wireless network applications by adapting the time-of-arrival (TOA) ranging technique. The non-line-of-sight (NLOS) condition is the critical problem in the IEEE 802.15.4a networks, and it can significantly degrade the performance of the TOA-based localization. To enhance the location accuracy due to the NLOS problem, this paper proposes an energy-efficient low complexity localization algorithm. The proposed approach performs the ranging with the multicast method, which can reduce the message overhead due to packet exchanges. By limiting the search region for the location of the node, the proposed approach can enhance the location accuracy. Experimental results show that the proposed algorithm outperforms previous algorithms in terms of the energy consumption and the localization accuracy.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.45-51
• /
• 2015

Recently, as WPAN (Wireless Personal Area Network) becomes the necessary feature in IoT (Internet of Things) devices, the importance of data security also hugely increases. In this paper, we present the low-complexity 128-bit AES-$CCM^*$ hardware IP for IEEE 802.15.4 standard. For low-cost and low-power implementation which is essentially required in IoT devices, we propose two optimization methods. First, the folded AES(Advanced Encryption Standard) processing core with 8-bit datapath is presented where composite field arithmetic is adopted for reduced hardware complexity. In addition, to support $CCM^*$ mode defined in IEEE 802.15.4, we propose the mode-toggling architecture which requires less hardware resources and processing time. With the proposed methods, the gate count of the proposed AES-$CCM^*$ IP can be lowered up to 57% compared to the conventional architecture.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.482-485
• /
• 2007

Recent generation of wireless computing has focus on the integrating of exisitng technologies to enhance the mobile capabilities and developing a new approaches to meet the needs of the growing pool of applications. This paper describes an integrated IEEE802.15.4 wireless CDMA based healthcare system that interacts and received the data wirelessly from wireless medical devices of patient and forward to medical center by using the cellular network. Mobile application had been developed not only as the middle ware to handle the receive and transmit of medical data between wireless sensor network and cellular network but also provides the interface for monitoring and analyzing the health condition of patients continuously at cellular phone regardless of its physical location. This system thus enables the remote healthcare monitoring and supports medical data seamlessly roams between IEEE802.15.4 wireless network and CDMA network beyond and outside the hospital environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8A
• /
• pp.702-711
• /
• 2011

This paper proposes a HAG(Hidden-Node-Aware Grouping) algorithm for IEEE 802.15.4 networks to enhance the performance by eliminating collisions resulted from the hidden node problem without adopting the RTS/CTS packet exchanges. To solve the hidden node problem, the HAG algorithm organizes nodes into disjoint transmission groups by dynamically allocating hidden nodes into separate groups which take turns in a round robin way for their transmission. For dynamic group adjustment, it periodically evaluates the presence of hidden nodes based on subordinate nodes' receipt reports. To accurately measure its behavior, this paper also builds an analytical model to estimate its throughput fluctuation over various network topologies. The mathematical model along with simulation results confirmed that the HAG technique gracefully degraded the throughput of IEEE 802.15.4 networks whereas the standard IEEE 802.15.4 networks suffer severe throughput fallout as hidden nodes become populated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.9
• /
• pp.19-28
• /
• 2010

The GTS(Guaranteed Time Slot) of the IEEE 802.15.4 standard, which is the contention free access mechanism, is used for low-latency applications or applications requiring specific data bandwidth. But it has some problems such as delay of service due to FIFS(First In First Service) scheduling. In this paper, we proposes a weight based GTS allocation scheme for fair queuing in IEEE 802.15.4 LR-WPAN. The proposed scheme uses a weight that formed by how much more weight we give to the recent history than to the older history for a new GTS allocation. This scheme reduces service delay time and also guarantees transmission simultaneously within a limited time. The results of the performance analysis shows that our approach improves the performance as compared to the native explicit allocation mechanism defined in the IEEE 802.15.4 standard.