• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.1-8
• /
• 2010

Multi antenna techniques using space-time codes can achieve diversity gains in a multi-path environment without additional bandwidth requirement. Most of the 4G candidate standards including the IEEE 802.16e adopt multi-input multi-output (MIMO) schemes to achieve either high throughput performance or diversity gains. In these 4G candidate standards, turbo codes using an iterative decoder with soft input soft output are used to overcome serious channel fading. For this reason, the estimated signal values from MIMO detectors should be soft decision detection values. In this paper, we propose efficient methods to estimate soft decision detection values for various space time coding schemes, and provide the simulation results of turbo coded space time coding scheme over an IEEE 802.16e link.

• Journal of Digital Contents Society
• /
• v.15 no.3
• /
• pp.319-326
• /
• 2014

IEEE 802.11 WLAN uses CSMA/CA(Carrier Sense Multiple Access/Collision Avoidance) method in MAC(Media Access Control) protocol, and through the carrier sense checks whether other users use the channel during the data transmission to avoid the data collision. Currently, IEEE 802.11 standard recommends the use of a fixed threshold which gives an impact on carrier sensing range. However, the existing scheme using the fixed threshold causes the operation of network to be inefficiency owing to the mobility in MANET(Mobile Ad hoc NETwork). In this paper, we found the better network throughput to be obtained by applying the proposed scheme, which chooses properly the carrier sensing threshold and transmission rate considering SINR(Signal to Interference-plus-Noise Ratio), to the MANET.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.568-575
• /
• 2011

In this paper, we propose a small broadband antenna for mobile device. The proposed antenna consists of a printed rectangular monopole antenna and a parastic element connected to ground using narrow meander line and it is designed on a FR-4 substrate that has a thickness of 0.8 mm and a dielectric constant of 4.4. The FR-4 substrate's size is 50 mm${\times}$90 mm comparable to the real mobile device. The fabricated antenna's size is 12.5 mm${\times}$10.5 mm${\times}$0.8 mm and the measurement shows -10 dB return loss bandwidth of 2,200~6,000 MHz and gains of 2.86~4.01 dBi. Accordingly, the proposed antenna can support mobile device for WiBro(2,300~2,380 MHz), WLAN(IEEE 802.11b/g/n: 2,400~2,480 MHz, IEEE 802.11a: 5,150~5,825 MHz), and mobile WiMAX(IEEE 802.16e : 2,500~2,690 MHz, 3,400~3,600 MHz) service bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.829-836
• /
• 2013

Wireless mesh networks(WMNs) are wireless backbone networks technology consisting of a multi-hop routers. Location management is essential to provide a service to the terminal in WMNs. IEEE 802.11s standards have two basic location management scheme for location management - the proxy registration procedure and the associated station discovery protocol. These basic schemes, however, suffer from serious drawbacks including redundancy control message, ineffective location information maintenance, additional delay time. This paper propose an on-demand station location management scheme using 6-address structure of IEEE 802.11s. Through analysis and experimental evaluation on simulation, we show that proposal scheme reduce control message and forwarding delay time.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.17-24
• /
• 2013

The localization accuracy in wireless sensor networks using ranging-based localization algorithms is greatly influenced by the ranging accuracy. Software implementation of HAL(Hardware Abstraction Layer) and MAC(Medium Access Layer) should seamlessly deliver the raw performance of ranging-based localization provided by hardware capability fully to the applications without degrading the raw performance. This paper presents the design and implementation of the software stack for IEEE 802.15.4a which supports normal ranging mode of the Nanotron's NA5TR1 RF chip. The experiment results shows that average ranging error rate with our implementation is 24.5% for the normal mode of the SDS-TWR ranging scheme.

• Journal of KIISE:Information Networking
• /
• v.33 no.5
• /
• pp.355-368
• /
• 2006

This paper introduces a new split-TCP approach for improving TCP performance over IEEE 802.11-based wireless LANs. TCP over wireless LANs differently from wired networks is not aggressive, which is a fundamental reason for poor performance. Therefore, we propose TAS (TCP-Aware Sub-layer) to migigate this problem. Our scheme extends the split-connection approach that divides a connection into two different connections at a split point such as an access point (AP). Using TAS, a wireless node emulates TCP ACK packets using MAC ACK frames, instead of receiving real TCP ACK packets. We compared TAS with both normal TCP and I-TCP (Indirect TCP) by NS2 simulation. Results show that TAS achieves higher throughput, more fair resource allocation and, in power-saving mode, shorter delays.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.58
• /
• pp.38-49
• /
• 2006

In order to increase the spectrum efficiency, recently, there is the number of studies for CR technology. For instance, IEEE 802.22 WRAN(Wireless Regional Area Network) WG considered the CR technology as a solution of WRAN system to serve the high speed internet service(1.5 Mbps down stream and 384 kbps up stream) in 100 km overall coverage and 54 MHz-746 MHz band. Basically, in MAC point of view, the WRAN system have been standardizing based on the IEEE 802.16 MAC layer features such as Data transmission method, QoS provision and Bandwidth request schemes. Additionally, the WRAN system further include CR nature functions such as incumbent user protection, self coexistence which would be importantly considered. Also, the inherent WRAN functions are added such as channel bonding and fractional bandwidth usage. This paper mainly explained frame structure, IU protection, self coexistence which are key functions of WRAN system. Finally, in this paper, we expressed a prospect of IEEE 802.22 WRAN standardization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.538-549
• /
• 2008

Recently IEEE 802.22 WG has considered Cognitive Radio (CR) technology to overcome shortage of communication channels. For using CR technology, accurate and rapid sensing method selection is extremely important. According to the channel sensing method, it is of the utmost importance because it can affect the incumbent system protection. So, optimum selection of channel sensing method is very important. IEEE 802.22 gives the solution, name of fine sensing, but the solution can not adapt to various networks. So in this paper we propose Policy-based Channel Sensing Architecture and Algorithms for Cognitive Radio Networks. The proposed channel sensing architecture and algorithms can reduce both primary system detection time and quiet time in our simulation. Among the proposed sensing algorithm, channel division round robin sensing reduce average detection time up to 70% compare to fine sensing method in IEEE 802.22.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.9-15
• /
• 2020

Wireless sensor nodes adopting the advanced preamble detection function, Message-In-Mesage (MIM), maximize the concurrent transmission opportunities due to the capture effect, result in improving the system performance significantly compared to the legacy IEEE 802.15.4 based sensor devices. In this paper, we propose an MIM capture probability model to analyze the performance gains by applying the MIM function to the wireless sensor nodes. We implemented the IEEE 802.15.4 and MIM by Python and performed extensive simulations to verify the performance gains through MIM capture effects. The evaluation results show that the MIM sensors achieve 34% system throughput gains and 31% transmission delay gains over the legacy IEEE 802.15.4-based sensors, which confirm that it was consistent with the analysis result of the proposed MIM capture probability model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.103-110
• /
• 2010

This paper addressed the implementation of the systematic performance analysis of Quality of Service (QoS) by using OPNET simulator in the interworking architecture of IEEE 802.16e (mobile WiMAX) and IEEE 802.11e (WLAN) wireless network. Four simulation cases were provided in OPNET simulator and a voice traffic was simulated with various performance metrics, such as Mean Opinion Score (MOS), end-to-end delay and packet transmission ratio. Based on the simulation results, the MOS value presented better in WiMAX to WiMAX case compared to others in both static and mobility case. Meanwhile, end-to-end delay was not greatly affected by mobility in four cases. However, mobility was affected much in MOS value and packet transmission ratio in WLAN to WLAN case than in others.