• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.35-42
• /
• 2003

We have studied DC energy conversion of RF card by wireless communication. In order to attain an objective, it used the system which is a Rectenna. The main purpose of energy conversion system is the operation of the circuits at RF-ID system. The proposed RF-ID system is a lot classified with the reader and tag. Reader is a kind of the base station role supporting RF energy. And priority tag convert RF energy from the reader it was delivered with a wireless to DC energy. The energy which is converted like Tag. It transmits to the reader characteristic ID of each card. The tag is mainly divided into rectifier, power module, memory and controller. The FRAM maintains the data like a ROM in no-power situation. And the advantage is a low power element compared with other EEPROM. There are two considerations, when RF energy is converted into DC source by wireless. One is energy amount supported from the reader, the other is high power efficiency. This paper presents a study of simulation and experiments on the RF-DC conversion circuit in tag by the power efficiency concentrated.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.29-30
• /
• 2007

In this paper, we propose Group Separation(GS) algorithm for RFID tag recognition. In GS algorithm, reader calculates tag ID by collision point, stores memory with the collision table. And reader classifies according to total number of tag ID's 1, requests each group. If tag comes into collision with the other tag, reader searches tag ID in collision table. As a result, we observes that transmitted data rate, the recognition time is decreased.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.131-137
• /
• 2010

UMSN (Ubiquitous Medical Sensor Network) is being used in u-Healthcare system of various medical facilities to identify objects and get information from sensors in real-time. RFID using radio frequency determines objects using Reader, which reads Tags attached to patients. However, there is a security vulnerability wherein Tag send its ID to illegal Reader because Tags always response to Readers request regarding of its Tag ID. In this paper, we propose Tag ID Classification Scheme to reduce Back-end Server traffic that caused by requests to authenticate between Readers and Tags that are attached to medical devices, patients, and sensors; To reduce security threats like eavesdropping and spoofing that sometimes occurred during authentication procedure. The proposed scheme specifies the patient category as a group based on patients Tag ID string. Only allowed Reader can perform authentication procedure with Back-end Server. As a result, we can reduce Back-end Server traffic and security threats.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2160-2179
• /
• 2015

In many Radio Frequency Identification (RFID) applications, the reader recognizes the tags within its scope repeatedly. For these applications, some algorithms such as the adaptive query splitting algorithm (AQS) and the novel semi-blocking AQS (SBA) were proposed. In these algorithms, a staying tag retransmits its ID to the reader to be identified, even though the ID of the tag is stored in the reader's memory. When the length of tag ID is long, the reader consumes a long time to identify the staying tags. To overcome this deficiency, we propose a slot allocated blocking anti-collision algorithm (SABA). In SABA, the reader assigns a unique slot to each tag in its range by using a slot allocation mechanism. Based on the allocated slot, each staying tag only replies a short data to the reader in the identification process. As a result, the amount of data transmitted by the staying tags is reduced greatly and the identification rate of the reader is improved effectively. The identification rate and the data amount transmitted by tags of SABA are analyzed theoretically and verified by various simulations. The simulation and analysis results show that the performance of SABA is superior to the existing algorithms significantly.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.27-30
• /
• 2003

Wireless power transmission system is one of the very interesting field not only in a technical and economical point of view but also that people are still trying to realize lossless power transmission. This paper has a purpose on the efficient power transmission at the passive type ICcard by using wireless power transmission system. The most difficult but important part of the passive type RF-ID system is building the system that supplies power from Reader-antenna to IDcard-antenna. To check what is the most efficient way to deliver power depending on what kind of specifications of the power-amp in reader, antenna and antenna in IDcard is for operating IDcard circuit efficiently receiving the power from reader-antenna. For this, we used 125kHz sinewave for RF signal as a basic specification, power-amp : OP-Amp for amplifying signal and AB Class push-pull power-amp for amplifying power, loop type antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.41-44
• /
• 2004

A RFID(Radio Frequency IDentification) system Is a kind of Radio Frequency Communication System and a branch of Automatic Data Collection System. The RFID System is composed of RF Tag(or Transponder) and RFID Reader(controller). This paper deal with Wireless communications that acquired RF Tag ID by RFID reader, and then target system will transmit Tag ID to RFID Server through the internet using Wireless LAN. The RFID system of Todays are commonly used by a wired RFID system. In this system uses commonly used Wireless LAN, and then we can connect the internet if we have a AP(Wireless Lan Access Point). Internet connection can make a transmission of RF Tag ID, and can make a reception of returning data that are images or information.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.712-714
• /
• 2004

최근 유비쿼터스 주요 이슈로 부각되는 Atuo ID나 유비쿼터스 ID(Ubiquitous ID)은 RFID(Radio Frefuency Identification) 태그(Tag)를 사용한 차세대 ID 체계이다. 이들 식별 체계는 해당 물품에 부착된 태그 정보를 RFID 리더(Reader)가 판독하여 이를 바탕으로 식별 작업을 수행함으로써 짧은 시간에 많은 물류 식별 처리가 가능할 수 있는 메커니즘을 가지고 있다. 하지만 리더가 수많은 태그 정보를 한꺼번에 모두 받아드림으로써 발생하는 여러 가지 오류가 발생할 수 있는데, 이를 충돌 문제(collision problem)이라 한다 본 논문은 충돌 문제들의 형태를 분석하고, 이를 개선할 수 있는 방안에 대해 모색, 제안하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.707-713
• /
• 2007

This paper implements a RFID multi-band multi-protocol reader platform, possible to select one of the UHF bands used in particular for distribution system in RFID, that is, from 860MHz to 960MHz, through programmable configuration. It also enables implemented platform in this paper to recognize many kinds of TAG protocol, such as EPC Class 1 GEN 1, Class 1 Gen2, ISO 18000-6A, B and C.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.157-161
• /
• 2017

Effective management of ULD (Unit Load Device) in Air Cargo Transportation is one of the Airline's main concerns. At present, the way of management of ULD which has the ID tag based on RFID is carried by cargo control staff with PDA. However, the activity of ULD management is limitted due to complexity of cargo terminal facilities. In this study, we offer the effective way of management of ULD by the DRONE equipped by LED-ID & RFID READER at the higher altitude in Air Cargo Terminal to recover the difficulty of identification due to complexity of terminal facilities. Further to the above, we suggest the operational effectiveness, limitation, and the direction of future research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1586-1594
• /
• 2011

LED-ID (light emitting diode - identification) technology is the new paradigm in the identification technology environment. LED-ID system typically needs line of sight (LOS) that supports narrow FOV transceivers links to achieve high data rate. On the other hand, narrow FOV reduces the coverage area. Therefore, the number of tags is increased significantly to cover the whole area. In this case number of link switching is increased when the reader moves within whole coverage area. Link switching delay is the important factor for the moving reader to maintain the communication with high data rate and better QoS. In this paper we propose in literature a new link switching scheme and measure the link switching delay time for LED-ID system. The simulation results show that the proposed link switching scheme is a possible candidate for multi-tag LED-ID system.