• 제목/요약/키워드: IAR

검색결과 44건 처리시간 0.03초

gcc 기반 eCos 운영체제 및 PROFINET 통신 스택의 IAR 포팅 방법 (Porting gcc Based eCos OS and PROFINET Communication Stack to IAR)

  • 김진호
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제12권4호
    • /
    • pp.127-134
    • /
    • 2023
  • 본 논문에서는 gcc 기반으로 개발된 eCos 운영체제 및 PROFINET 통신 스택을 IAR 컴파일러로 포팅하는 방법에 대해 설명한다. eCos 운영체제의 경우 PROFINET 구동을 위한 멀티 스레드, TCP/IP, 디바이스 드라이버 등의 기반 기능을 제공하고 있어, PROFINET 어플리케이션 개발시 변경할 필요가 없다. 따라서, 본 연구에서는 eCos는 gcc로 빌드된 라이브러리를 활용하고, 개발시 변경이 필요한 PROFINET 통신 스택은 IAR 로 포팅하여 함께 링킹하는 방안을 제안한다. IAR 링커와 gcc 링커의 차이로 인해 일부 섹션의 주소를 정의하는 심볼과 생성자의 주소가 정상적으로 생성되지 못하는 문제가 있어, MAP 파일을 읽어 해당 심볼 및 주소를 저장하는 외부 툴을 개발하였으며, 이 툴과 연동하여 동작할 수 있도록 부트로더의 소스 코드를 수정하였다. 제안하는 방법을 검증하기 위해 실제 지멘스 사의 PLC와 연결하여 PROFINET IRT 통신으로 실제 I/O 가 정상 동작하는지 검증하였으며, IAR 컴파일러가 컴파일 시간 및 생성된 바이너리 크기 모두 더 좋은 성능을 가지고 있음을 확인하였다. 본 연구에서 제안하는 방법은 eCos 및 PROFINET 통신 스택뿐 아니라 다양한 오픈 소스를 상용 컴파일러로 포팅하는데 도움을 줄 것으로 기대한다.

이온보조반응법으로 처리한 알루미나 코아의 인장결합강도에 관한 연구 (TENSILE BOND STRENGTH OF ALUNMINA CORE TREATED BY ION ASSISTED REACTION)

  • 김형섭;우이형;권긍록;최부병;최원국
    • 대한치과보철학회지
    • /
    • 제38권5호
    • /
    • pp.704-723
    • /
    • 2000
  • This study was undertaken to evaluate the tensile bond strength of In-Ceram alumina core treat-ed by ion assisted reaction(IAR). Ion assisted reaction is a prospective surface modification technique without damage by a keV low energy ion beam irradiation in reactive gas environments or reactive ion itself. 120 In-Ceram specimens were fabricated according to manufacturer's directions and divided into six groups by surface treatment methods of In-Ceram alumina core. SD group(control group): sandblasting SL group: sandblasting + silane treatment SC group: sandblasting + Siloc treatment IAR I group: sandblasting + Ion assisted reaction with argon ion and oxygen gas IAR II group: sandblasting + Ion assisted reaction with oxygen ion and oxygen gas IAR III group: sandblasting + Ion assisted reaction with oxygen ion only For measuring of tensile bond strength, pairs of specimens within a group were bonded with Panavia 21 resin cement using special device secured that the film thickness was $80{\mu}m$. The results of tensile strength were statistically analyzed with the SPSS release version 8.0 programs. Physical change like surface roughness of In-Ceram alumina core treated by ion assistad reaction was evaluated by Contact Angle Measurement, Scanning Electron Microscopy, Atomic Force Microscopy; chemical surface change was evaluated by X-ray Photoelectron Spectroscopy. The results as follows: 1. In tensile bond strength, there were no statistically significant differences with SC group, IAR groups and SL group except control group(P<0.05). 2. Contact angle measurement showed that wettability of In-Ceram alumina core was enhanced after IAR treatment. 3. SEM and AFM showed that surface roughness of In-Ceram alumina core was not changed after IAR treatment. 4. XPS showed that IAR treatment of In-Ceram alumina core was enabled to create a new functional layer. A keV IAR treatment of In-Ceram alumina core could enhanced tensile bond strength with resin cement. In the future, this ion assisted reaction may be used effectively in various dental materials as well as in In-Ceram to promote the bond strength to natural tooth structure.

  • PDF

3차원 다중 로봇의 동적 성능 평가 (Evaluation of dynamical performance of 3 dimensional multi-arm robot)

  • 김기갑;김충영
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.756-759
    • /
    • 1997
  • Multi-arm cooperation robot system is required for more specific and dextrous jobs such as transferring very large or heavy objects, or grasping work piece while processing on it. There is little research on 3-dimensional multi-arm robot. Here we propose two performance indices presenting isotropy of end-effector's acceleration and velocity capabilities with constraints of joint torques, that is Isotropic Acceleration Radius [IAR] and Isotropic Velocity Radius [IVRI. Also the procedure to find 3-dimensional IAR, IVR is proposed, where available acceleration set concept is used. The case of 3-dimensional two 3 joint robot system was simulated and the distributions of IAR, IVR was studied.

  • PDF

IAR-GT: An Incentive Aware Routing based on Game Theory for Selfish Opportunistic Networks

  • Li, Li;Zhong, Xiaoxiong;Jiang, Yong
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제13권1호
    • /
    • pp.152-171
    • /
    • 2019
  • In opportunistic networks, nodes may appear some selfishness while transmitting the message, however, most of the existing research works consider the individual selfishness or social selfishness respectively, and these two types of selfishness may coexist in opportunistic networks. In this paper, we propose an Incentive Aware Routing based on Game Theory for selfish OPPNETs, named IAR-GT, which uses Rubinstein-Stahl bargaining game model to incentivize selfish nodes cooperation in data forwarding. IAR-GT scheme not only considers the resources of nodes, but also uses a new method to calculate the social ties between them. Trace-driven simulations show that our incentive aware routing scheme achieves better performances than comparing schemes under two types of selfishness coexistence environments.

30kW급 산업용 마그네트론 고압전원 개발 (Development of High Voltage Power Supply for 30kW Industrial Magnetron)

  • 류홍제;김종수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2007년도 추계학술대회 논문집
    • /
    • pp.50-52
    • /
    • 2007
  • In this paper, the design of power supply for high power magnetron system is stuied. For magnetron drive, three kinds of power supply is required for main high voltage, magnet and heating filament. Detail design was accomplished with basic simulation and real system is developing based on basic design.

  • PDF

Metallization of Polymers Modified by Ton-Assisted Reaction (IAR)

  • J.S. Cho;Bang, Wan-Keun;Kim, K.H.;Sang Han;Y.B. Sun;S.K. Koh
    • 마이크로전자및패키징학회지
    • /
    • 제8권1호
    • /
    • pp.53-59
    • /
    • 2001
  • Surfaces of PTFE and PVDF were modified by ion-assisted reaction (IAR) in which 1 keV $Ar^{+}$ ions were irradiated on the surface of the polymer with varying ion dose in an oxygen gas environment, and Cu, Pt, Al and Ag thin films were deposited on the modified polymers. Wettability of the modified polymers was largely improved by the formation of hydrophilic groups due to chemical reaction between polymer surface and the oxygen gas during IAR. The change in wettability in the modified polymers was also related to the change in surface morphology and roughness. Adhesion between metal films and polymers modified by IAR was significantly improved, so that no detachment was possible in the $Scotch^{TM}$ tape test. The increase of adhesion strength between the metal film and the modified PVDF was mainly attributed to the formation of hydrophilic groups, which interacted with the metal film. In the case of the modified PTFE, the enhanced adhesion to metal film could be explained by the change in surface morphology together with the formation of hydrophilic groups. The electrical properties of the metal films on the modified polymers were also investigated.

  • PDF

Ethnobotanical Studies of Gangwon-do: A Comprehensive Research of the Province and Data Analysis

  • Kim, Young-sil;Chung, Jae-min;Kim, Young Dong
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2018년도 춘계학술발표회
    • /
    • pp.70-70
    • /
    • 2018
  • As science and technology has developed, human could be flourished especially at the aspect of agriculture and medicine. However, the traditional knowledge of them has stopped being used, which leads to extinctions of it. Korea National Arboretum had surveyed the ethnobotanical uses of Gangwon-do from 2006 to 2017. 522 taxa were defined as ethnoplants through 21469 sheets thanks to 355 respondents who composed 279 females, 73 males and three refused to answer. Analysis of ethnoplants had conducted to provide the excavation of the new plants for industries of agriculture and medication, as well as the evidence for protection of TK and benefit derived from it. Aster scaber Thunb. had been found as the most citated taxa by 0.6591 RFC figure, Pinus desiflora Seibold & Zucc. was found to have the extensive categories of use. Aralia elata (Miq.) Seem. showed the highest figure of CI value. In the index of RI, Pinus desiflora Seibold & Zucc. appeared again, as well as CV, cultural value. For evaluation of the usages of ethnoplants IAR figures are analyzed. The fiber has shown the biggest figure of IAR, despite the dyes are placed the smallest figure.

  • PDF

산업용 마그네트론 보조전원 개발 (Development of Auxiliary Power Supply for Industrial Magnetron)

  • 류홍제;김종수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2007년도 추계학술대회 논문집
    • /
    • pp.47-49
    • /
    • 2007
  • For the magnetron, two kinds of auxiliary power is required to generate proper heat and electromagnetic field. In this paper the development of filament power supply and magnet power supply for high power industrial magnetron is studied. The filament power supply which is generate proper heat, even it doesn't require high power like main power supplies, has many consideration such as high voltage insulation and power control coordinated with high voltage cathod current to maintain constant heat generation. The novel control method using constant resistance control is proposed for accurate control of filament power supply.

  • PDF