• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.368-378
• /
• 2023

Automotive headlamp with LED matrix exploits low-cost low-speed serial buses such as I2C and SPI for digital LED control. When headlamp resolution increases, LED control data significantly increases to exceed capacity of control bus. This paper proposes HLCP (Headlamp LED Control Protocol), a novel LED maxtrix headlamp protocol. The proposed protocol exploits dedicated instructions to control many LEDs simultaneously, so it can control much more LEDs than conventional control buses although it is basically based on I2C bus. It is designed and verified in Verilog HDL. Simulation results show that HLCP can control LED matrix headlamp more efficiently than I2C and SPI.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.317-324
• /
• 2009

In this paper, a 4-way Handshake protocol in the IEEE 802.11i is analyzed in terms of both security and reliability. It is shown that the 4-way Handshake protocol breaks down under some conditions due to a MIC (message integrity code) failure, and a solution to fix it is proposed. It is also proposed that a new 2-way Handshake protocol which is more secure and efficient than the 4-way Handshake protocol.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.227-233
• /
• 2017

Python language is widely used because of its ease of learning and its wide application range. Arduino, on the other hand, is also widely utilized hardware for physical computing and internet of things(IoT). However, Arduino is controlled by $C{^+^+}$ language, which makes it difficult for non-experts to enter swiftly. This paper proposes an errorless protocol that can simultaneously control multiple Arduino devices in a master device using python language with I2C communication. Using the protocol proposed in this paper, we can take advantage of the python language to control multiple Arduinos.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.7
• /
• pp.623-629
• /
• 2013

This paper presents the implementation result of the EEG(electroencephalogram) signal transmission protocol and its test platform. EEG measured by a dry-type electrode is directly converted into digital signal by ADC(analog-to-digital converter). Thereafter it is transferred DSP(digital signal processor) platform by $I^2C$(inter-integrated circuit) protocol. DSP conducts the pre-processing of EEG and extracts feature vectors of EEG. In this work, we implement the $I^2C$ protocol with 16 channels by using 10 or 12-bit ADC. In the implementation results, the overhead ratio for the 4 bytes data burst transmission measures 2.16 and the total data rates are 345.6 kbps and 414.72 kbps with 10-bit and 12-bit 1 ksps ADC, respectively. Therefore, in order to support a high speed mode of $I^2C$ for 400 kbps, it is required to use 16:1 and $(8:1){\times}2$ ratios for slave:master in 10-bit ADC and 12-bit ADC, respectively.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.3
• /
• pp.83-85
• /
• 2015

It has been increased that communicate each other things such as consumer electronics, mobile equipments and wearable computer with serial communication protocol. The conventional method of SPI and I2C high speed serial communication is widely used with 2 pin of clock and data pin. It has been more important than the speed of data transfer to simplify the hardware structure because the IoT components is reduced the hardware complexity. In this paper, we describe the protocol and implementation of serial data transfer with only one pin. The proposed protocol is suitable for the mobile products that send and receive the small amount of data with low speed and low power consumption.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.45-58
• /
• 2023

KVMF(Korean Variable Message Format) 1.0 protocol is the Army's standard tactical datalink protocol that defines standard messages and communication methods to enable data communication between various weapon systems through bitwise variable message processing. The protocol has been applied to a variety of Army weapon systems over the past decade and has contributed to upgrade the Army's operational capabilities by enabling the implementation of Network Centric Warfare (NCW), the core of modern warfare. Since the KVMF 1.0 protocol was applied, new weapon systems with new technologies have been introduced over time, and new weapon systems have new messages based on the characteristics of the weapon system. As a result, compatibility problems arose due to different message versions with existing weapon systems, and it was expected that these problems would continue to emerge in the future, considering the need for continuous message revisions. Therefore, it became necessary to solve this problem, so this paper proposed a KVMF 2.0 protocol design that guarantees compatibility between forward and backward versions. In this paper, we implemented the design as SW, and confirmed that the design worked successfully by test between forward and backward versions on test environment. Therefore, when the KVMF 2.0 protocol design is applied to a weapon system, we can expect that the weapon system can be compatible with the forward and backward versions working with the existing weapon systems as well as with the future weapon systems.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.245-252
• /
• 2003

We designed a silicon pressure sensor interface circuit with digital calibration capability. The interface circuit is composed of an analog section and a digital section. The analog section amplifies the weak signal from the sensor and the digital section handles the calibration function and communication function between the chip and outside microcontroller that controls the calibration. The digital section is composed of I2C serial interface, memory, trimming register and controller. The I2C serial interface is optimized to suit the need of on-chip silicon microsensor in terms of number of IO pins and silicon area. The major part of the design is to build a controller circuit that implements the optimized I2C protocol. The designed chip was fabricated through IDEC's MPW. We also made a test board and the test result showed that the chip performs the digital calibration function very well as expected.

• The KIPS Transactions:PartC
• /
• v.19C no.1
• /
• pp.29-38
• /
• 2012

Due to rapid spread of smart phones and SNS(Social Network Service), using of Internet applications has increased and taking up bandwidth more than 3G network's capacity recently. This caused reduction of speed and service quality, and occurred strong needs that backbone network company to increasing investment costs. Also a great rise of mobile network users causing identity management problems on mobile service provider through mobile network. This paper proposes advanced IDM3G[1] - to solve user ID management and security problems on mobile internet application services over 3G network and more - authentication management protocol. $I^2DM$ protocol breakup loads which made by existing IDM3G protocol's mutual authentication via mobile operator, via sending some parts to internet application service provider, enhancing mobile and ID management of service provider and network load and process load from information handling and numbers of transmitting packets, to suggest more optimized protocol against further demanding of 3G mobile network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.251-255
• /
• 2015

In this paper, we propose a fuse controller which is used for storing the optimal value or the correction value for the surrounding product of the IoT applications and it is implemented serial communication circuit using a single pin. Because of the proposed single pin protocol is simpler in the hardware than the conventional $I^2C$ and SPI using two or more pins, it is suitable for the area of small amount of data transmission. The function of the one pin protocol is verified by logic simulation and the FPGA test board and it is fabricated using CMOS 0.35um technology. It is expected to use the IoT product that require the low power consumption and simple hardware.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.535-536
• /
• 2006

In the embedded system, external device interface that operates serial protocol with lower speed than the general computers is used commonly. This paper describes I2C bus protocol that is a bi-directional serial bus with a two-pin interface. The I2C bus requires a minimum amount of hardware to relay status and reliability information concerning the processor subsystem to an external device.