• ALGAE
• /
• 제31권1호
• /
• pp.49-59
• /
• 2016

Ulva pertusa, a common bloom-forming green alga, was used as a model system to examine the effects of elevated carbon dioxide (CO₂) and temperature on growth and photosynthetic performance. To do this, U. pertusa was grown under four temperature and CO₂ conditions; ambient CO₂ (400 μatm) and temperature (16℃) (i.e., present), elevated temperature only (19℃) (ET; i.e., warming), elevated CO₂ only (1,000 μatm) (EC; i.e., acidification), and elevated temperature and CO₂ (ET and EC; i.e., greenhouse), and its steady state photosynthetic performance evaluated. Maximum gross photosynthetic rates (GP_max) were highest under EC conditions and lowest under ET conditions. Further, ET conditions resulted in decreased rate of dark respiration (R_d), but growth of U. pertusa was higher under ET conditions than under ambient temperature conditions. In order to evaluate external carbonic anhydrase (eCA) activity, photosynthesis was measured at 70 μmol photons m⁻² s⁻¹ in the presence or absence of the eCA inhibitor acetazolamide (AZ), which inhibited photosynthetic rates in all treatments, indicating eCA activity. However, while AZ reduced U. pertusa photosynthesis in all treatments, this reduction was lower under ambient CO₂ conditions (both present and warming) compared to EC conditions (both acidification and greenhouse). Moreover, Chlorophyll a and glucose contents in U. pertusa tissues declined under ET conditions (both warming and greenhouse) in conjunction with reduced GP_max and R_d. Overall, our results indicate that the interaction of EC and ET would offset each other’s impacts on photosynthesis and biochemical composition as related to carbon balance of U. pertusa.

• 한국전산유체공학회지
• /
• 제6권2호
• /
• pp.40-46
• /
• 2001

Two-dimensional steady flowfields generated by slot injection into supersonic flow are numerically simulated by the integration of Navier-stokes equation with two-equation κ-turbulence model. High-order upwind scheme is used on unstructured adaptive meshes. The numerical results are compared with experimental data in terms of surface static pressure distributions, the length of the upstream separation region, and the height of the Mach surface for steady flowfields with a Mach number of 3.71 and a unit Reynolds number of 5.83×10/sup 6//m.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.437-450
• /
• 2014

원전의 항공기 충돌 리스크 평가에 사용되는 대표매개변수를 선정하기 위한 방법론을 개발하였다. 대상 원전은 국내의 대표적인 경수로형 원전 중 하나로 선정하여 3차원 유한요소 해석 모델을 구축하였다. 콘크리트 재료모델에는 소성손상모델이 적용되었으며, 강재는 다중선형곡선거동을 가지는 것으로 모델링하였다. 운동에너지, 전체 충격량, 최대 충격량, 최대 하중등 4종의 대표매개변수 후보군을 선정하였다. 각각의 매개변수 후보군은 모두 충돌 속도와 질량의 함수로 표현되므로, 충돌속도 50~200m/s, 항공유량 30~90%의 범위에 대하여 매개변수값을 도출하고 충돌 해석을 수행하여, 충돌 시의 구조 응답과의 상관관계를 분석하였다. 모든 해석에서 항공기의 기종은 보잉767 기종으로 선정하였다. 충돌해석에는 Riera의 하중-시간 이력 함수를 이용한 해석기법을 적용하였다. 매개변수와 충돌 시 응답의 상관관계 적합성은 결정계수값을 이용하여 분석하였다. 4 종의 대표매개변수 후보군 중 최대 하중값이 가장 직관적일 뿐만 아니라 본 연구에서의 해석 케이스에서는 응답과의 상관성도 가장 뛰어난 것으로 나타남에 따라, 항공기충돌 리스크 평가를 위하여 가장 적합한 매개변수라 할 수 있을 것으로 판단되었다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.698-699
• /
• 2003

DA-3711 is a novel, anti wrinkle agent containing growth factors derived from human skin culture. In this study, effect of topical application of DA-3711 on chronic ultraviolet B (UVB)-induced skin damage was evaluated in hairless mice model. Exposure to UVB for 8 weeks induced apparent wrinkles on the back skin of the mice. The dorsal surfaces were exposed to UVB for a further 8 weeks, during which the surfaces where treated daily by topically application of a lotion containing either 35％ or 70％ of DA-3711. For comparison, lotion base, lotion base containing Cylasphere Retinol(equation omitted) (2500 I.U., Coletica) and NouriCe $l^{(R)}$ (Biozhem) were applied topically once a day for 8 weeks.(omitted))

• 대한화학회지
• /
• 제62권3호
• /
• pp.191-202
• /
• 2018

The aim of this work is to study Monte Carlo simulation of ethylene (co)polymerization over Ziegler-Natta catalyst as investigated by Chen et al. The results revealed that the Monte Carlo simulation was similar to sum square error (SSE) model to prediction of stage II and III of polymerization. In the case of activation stage (stage I) both model had slightly deviation from experimental results. The modeling results demonstrated that in homopolymerization, SSE was superior to predict polymerization rate in current stage while for copolymerization, Monte Carlo had preferable prediction. The Monte Carlo simulation approved the SSE results to determine role of each site in total polymerization rate and revealed that homopolymerization rate changed from site to site and order of center was different compared to copolymerization. The polymer yield was reduced by addition of hydrogen amount however there was no specific effect on uptake curve which was predicted by Monte Carlo simulation with good accuracy. In the case of copolymerization it was evolved that monomer chain length and monomer concentration influenced the rate of polymerization as rate of polymerization reduced from 1-hexene to 1-octene and increased when monomer concentration proliferate.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.99-99
• /
• 2002

The hormone resistin is associated with typeII diabetes mellitus in rodent model. Resistin impairs glucose tolerance and insulin action. A new class of anti-diabetic drugs were called thiazolidinediones (TZDs) downregulates a resistin which is induced during adipocyte differentiation. But the connection between increased adiposity and resistin remains unknown. The objectives of this study was to clone a mouse resistin cDNA and to generate transgenic mice overexpressing mouse resistin gene. The 555 bp of mouse resistin was amplified from mob cDNAS by polymerase chain reaction (PCR) and cloned into pCR$\^$(R)/ 2.1 TOPO T-vector. Mouse resistin mRNA on the basis of Genbank sequence (acession no. AF323080). Then, the PCR product was cloned into pTargeT$\^$TM/ mammalian expression vector that has pCMV promoter and chimeric intron. Restriction enzyme analysis with BamH I and Not I was carried out to determine an orientation of the insert in the vector. The pCMV-mus/resistin gene was prepared from previous recombinant pTargeT$\^$TM/-mus/resistin by digestion of Bgl II, and has used for microinjection into pronuclei of one cell embryos. The microinjected embryos were transfered to pseudopregnant foster-mother. Mouse resistin expression was detected in transgenic F1 mice by Reverse Transcriptase- Polymerase Chain Reaction (RT-PCR). Resistin gene expression mouse has heavier body weight which was measured higher level of plasma glucose than that of normal mouse. And in diet-induced experiments, the abdominal fat pads were isolated from each 24h starvation and re-feeding after fasting group mice that were assessed by RT-PCR analysis. In fasting group mice, resistin expression was higher than that of re-feeding group mice. This result suggests that the resistin gene overexpressing mice may be became to obesity and be useful as an animal disease model to be diabetes mellitus caused by insulin resistance of resistin.

• 한국농림기상학회지
• /
• 제14권4호
• /
• pp.277-282
• /
• 2012

냉기호 지대 안에서도 일정 수준의 바람이 부는 장소에서는 일 최저기온이 기존 공간기후모형에 의해 예측된 만큼 떨어지지 않음이 관찰되었다. 경남 하동군 악양 집수역 출구부근의 실측자료를 토대로 냉기호가 형성된 25일에 대하여 기존 방법에 의한 일 최저기온 예측 시 발생하는 추정오차를 그 때 관측된 풍속과 비교한 결과 바람이 강해질수록 추정오차가 커지는 경향이 뚜렷해서 풍속이 2m/s에 이르면 냉기호 효과가 완전히 소멸되는 것으로 나타났다. 풍속과 추정오차 간 관계는 Y=2X+0.4 ($R^2$=0.76)로 표현되며 이 식에서 Y는 추정오차($^{\circ}C$), X는 풍속(m/s)이다. 이 식을 기존 일 최저기온 추정모형의 냉기집적효과에 결합하여 악양 집수역 냉기호 수몰지역에 위치한 3곳의 일 최저기온 추정에 이용하였다. 이때 입력 풍속은 바람장 모형 구동에 의한 모의풍속이었다. 추정된 일 최저기온은 오차의 평균평방근(RMSE)이 기존 모형의 1.72에서 1.20으로 줄어들고, 평균오차(ME)로 표현한 편기성(bias)도 -1.33에서 -0.37로 개선되었다.

• Journal of Photoscience
• /
• 제4권3호
• /
• pp.97-103
• /
• 1997

The effect of temperature on the fluorescence quenching of 2-(4-Methoxyphenyl)-5-(1-naphthyl)-1,3,4-oxadiazole (MPNO1), 2-(4-Methoxyphenyl)-5-(2-naphthyl)-1,3,4-oxadiazote(MPNO2), by aniline, and 2-Phenylindole (2-PI) by CCk, in toluene by steady state method and in benzene by time-resolved method have been carried out in the temperature range 30 - 70$\circ$C. The Stem-Volmer (S-V) plots, I$_0$/I against quencher concentration [Q] at different temperanares show positive deviations. The fluorescence lifetimes determined at different temperatures show no systematic variations and the variations being within the experimental error, the average values of lifetimes $ $\tau$ (t) are taken for further calculations. Rate constants such as Stem-Volmer quenching constants K$_sv}$, quenching rate parameters k$_q$ and k'$_q$, static quenching constant V and kinetic distance r are determined using the modified Stem-Volmer equation and sphere of action static quenching model. In order to see whether the reactions are diffusion limited, equations k$_q$ = e$^{-Eq/RT}$ and k'$_q$ = e$^{-Eq/RT}$ are used to determine the values of E$_q$ and E'$_q$, the activation energies for collisional quenching and the values of E$_q$ are 14.53. 17.28 and 16.20 kJ mole$^{-1}$ for MPNO1, MPNO2 and 2-PI respectively and the values of E'$_q$ are 14.62 and 17.73 for MPNO1 and MPNO2 respectively. From the magnitudes of various quantities it has been concluded that the reactions are diffusion limited and the observed positive deviations in the S-V plot are due to static and dynamic quenching.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.86-92
• /
• 2010

A metal diaphragm compressor has been widely used for supplying a high pressures gas. This compressor mainly consists of gas oil space and metal diaphragm. Gas sucked in the gas space is compressed by an oscillating metal diaphragm existed between the gas and oil space. A non-return discharge and suction check-valve are components of the compressor that draw off the compressed oil and gas. Those components are self-actuated by differential pressures. Therefore, the rapid response and stable operating conditions are required. In the present study, to find out the dynamic behavior of the suction, discharge valve and diaphragm compressor, the unsteady flow field has been investigated numerically by using the unsteady two-way FSI (Fluid Structure Interaction) simulation method, $k-{\omega}$ turbulent model and mesh deformation.