• Journal of Radiation Industry
• /
• v.5 no.3
• /
• pp.197-202
• /
• 2011

In this study, an Ag-polyaniline-silica (Ag-PANI-silica) nanoparticle was evaluated as a radioisotope carrier. An Ag-PANI-silica nanoparticle was incubated in the $^{125}I$ solution for a duration of 24 hr to test its radioisotope absorptivity. During the incubation, radioactivity of the nanoparticle was measured at 3, 6, 12, and 24 hr. After a 24 hr incubation, $^{125}I$-Ag-PANI-silica nanoparticle was incubated in a fresh saline for a duration of 48 hr to check its stability. Additionally, the $^{125}I$-Ag-PANI-silica nanoparticle was injected to the ICR mouse to investigate its in-vivo distribution characteristics. The $^{125}I$ absorption yield of the Ag-PANI-silica nanoparticle was higher than 95% after a 6 hr incubation period in the $^{125}I$ solution. And $^{125}I$-Ag-PANI-silica was stable for 48 hr at 80% yield at room temperature. The SPECT/CT image of a mouse that received $^{125}I$-Ag-PANI-silica complex showed that the $^{125}I$-Ag-PANI-silica complex was distributed in the lung, stomach and thyroid at 30 min post injection. From these results, the Ag-PANI-silica nanoparticle has good radio-iodine carrying property and can be applicable for the purpose of diagnosis and therapy.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.51-64
• /
• 2013

When it comes to current growth trend for the printing process in Asia printing market, offset printing, gravure printing and screen printing are reduced respectively -4%, -19%, -55%. In judging from the fact, the change in the printing production system from mass production on small amount to small production on mass amount is the biggest issue. For this reason, digital printing shows the significant growth. According to the increase of the growth 78% for electro photography way and 67% for ink-jet, it's not enough to catch up with digital printing which is increasing as time goes by to equip with hardware like as digital press. There's been necessary to install the BOD(Book on Demand) system which is the advanced and regular publication edit solution based on web-to-print model in the prepress, and it has made the BOD system be considered in relation to maximization of efficiency and production. Therefore, this research tries to step forward from the POD concept, which is refired to "Print along with the ordered quantities, the ordered appropriate time and the demanded place", so that it could expand the range of the printing/publishing environment using the BOD system, the order-made publication based on automatically operating template. And it tried to make the relation to digital web press on ink-jet method which is adequate to "mass production on small amount" with such advanced concept. This research also aims to use actively BOD solution model to promote the productivity of labor, and then to produce the printings across all related industries, which means to manufacture maximally the products on the shortest time at minimum place through PC equipments.

• Journal of Embryo Transfer
• /
• v.10 no.3
• /
• pp.219-227
• /
• 1995

This study was investigated to test in vitro-maturation rate of bovine follicular oocytes freezability of in vitro-matured bovine follicular oocytes with different stock solution in Glycerol and Propanediol, freezability of in vitro-rnatured bovine follicular oocytes on cryoprotectants, the viability of in vitro-rnatured bovine follicular oocytes by morphologically normal and FDA staining method. 1. The maturation rates of bovine follicular oocytes classified as grade A, B and C was 88, 63 and 21%, respectively. 2. Freezability of in vitro-matured bovine follicular oocytes on stock solution, TCM-199+5% FCS and m-PBS + 5% FCS was 61%(n=105), 48%(n=62) in $_1$M Glycerol and freeability of in vitro-matured bovine follicular oocytes on stock solution, TCM-199 +5% FCS and m-PBS + 5% FCS was 68%(n=112), 42%(n=57) in 1~2 Propanediol. The results indicate that freezability of in vitro-matured bovine follicular oocytes with different stock solution is important. 3. Freezability of in vitro-matured bovine follicular oocytes on cryoprotectants was Glycerol and PROH was 56%(n=167), 57%(n=169). The results indicate that PROH was superior to Glycerol. 4. The rates of morphologically normal IVM oocytes after thawing of cryopreserved oocytes with Glycerol and PROH were 39%(n=$_1$8), 65%(n=39), respectively. The results indicate that PROH was superior to Glycerol. 5. The fluorescent light intensity after thawing of cryopreserved oocytes classified with Positive, Partial-I, Partial-II, Negative with Glycerol and PROH. The results of FDA-positive 24%, 42%, Partial-I 17%, 10%, Partial- H 20%, 12%, FDA-negative 39%, 37%, and Partial-I, II, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.774-787
• /
• 2011

This paper deals with quantitative analysis about the characteristics of GNSS(Global Navigation Satellite System) signals contaminated with multipath signals and day-to-day repeatability of the navigation solution and SNR(Signal to Noise Ratio) caused by multipath signals using the collected data from GPS receiver installed on KSLV-I which was on standby on the launch pad at Naro Space Center. Since the GPS antennas, surrounding environments and GPS satellite orbits were very slightly changed with respect to the day, the repeating pattern of the solution and SNR caused by the multipath signals was verified from the collected data. Analytic result of the multipath effects and day-to-day repeatability of the navigation solution and SNR observed at the launch pad would be used for obtaining more stable performance of the GPS receiver when the satellite launch vehicles are on standby.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.46.2-46.2
• /
• 2000

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.32 no.6
• /
• pp.205-210
• /
• 1983

This paper presents a steady-state computer solution of the fundamental semiconductor one-dimensional transport equations, describing a single (metal-semiconductor) contact device, involving only one type of charge carrier. The computations are conveniently made by the

• Bulletin of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.111-114
• /
• 1987

Temperature-dependent, solution EPR spectra of two mixed-valence copper(II)-copper(I) complexes have been simulated by using modified Bloch equations. The transition probability for the intramolecular electron transfer is determined from the simulation. The transition probabilities have been fitted to the Arrhenius equation to derive the activation energies. The transition probability also varies according to the solvent used.

• Journal of Industrial Convergence
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2012

The purpose of this study firstly shows the marketing current condition and features of large discount stores playing a big change role in the Korea domestic distribution market. Secondly, I will analyze the success factors of the online marketing. And then finally, I will derive implication regarding the using solution of the effective online marketing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1911-1918
• /
• 2001

Recently the non-destructive test technique which uses the grain boundary etching characteristics owing to the variation of material structures has been proposed. However, during in-serviced GEM test there are a lot of variables such as the changes of temperature and concentration of etching solution, the roughness condition of surface polished etc.. The purpose of this paper is to investigate the influences of these test variables on GEM test results in order to establish a reliable and sensitive of GEM evaluation technique. The experiments are conducted in various solution temperatures, 10$\^{C}$, 15$\^{C}$, 20$\^{C}$, and 25$\^{C}$ and in 70% and 100% concentrations of that, and in various surface roughnesses polished by #800, #2000, and 0.3㎛ alumina powder. Through the test with variables, it is verified that the decrease of temperature and concentration of etching solution and the coarsened surface roughness by not using polishing cloth and powder induce some badly and/or greatly influences on GEM test results like grain boundary etching width(W$\_$GB) and intersecting point ratio(N$\_$i/N$\_$0/). Therefore, to get reliable and good GEM test results, it must be prepared the surface of specimen polished by polishing cloth and 0.3㎛ alumina powder and the saturated picric acid solution having 25$\^{C}$ and be maintained the constant temperature(25$\^{C}$) during GEM test.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.1
• /
• pp.125-132
• /
• 2001

This study was carried out to investigate the effect of multi or single application of fluoride plus 0.05% NaF solution on the remineralization of dental caries lesion. The microhardness changes of enamel surface were measured after application of fluoride and precipitation of 0.05% NaF solution on 6 groups of cow's tooth on which the artificial carious lesions were formed first. Test groups were calssified into two step application with NaF, $SnF_2$ and APF under different application time conditions plus 0.05% NaF solution(group I, II, III, IV) and single application with APF plus 0.05% NaF solution (group V) and control(0.05% NaF solution only, group IV). The obtained results were as follows. 1. Regarding microhardness change of enamel surface. microhardness increments in group I(NaF for 1 minute+APF for 3 minutes+0.05% NaF solution for 1 minute), II($SnF_2$ 1 min+APF 3 min+NaF sol.), III($SnF_2$ 2 min+APF 2 min+NaF sol.), IV(NaF 2 min+APF 2 min+NaF sol.) and V(APF 4 min+NaF sol.) were significantly greater than group VI.(P<0.05) 2. Microhardness changes of shorter application time of $SnF_2$ (group II) were significantly greater than group III. (P<0.05) 3. Microhardness changes were variable with kinds of fluoride, application sequence and application time of fluoride. but had no relation with the number of fluoride application.