• Bulletin of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.654-660
• /
• 1998

$[Fe^{II}Fe^{III}BPLMP(OAc)_2](BPh_4)_2$ (1), a new model for the reduced form of the purple acid phosphatases, has been synthesized by using a dinucleating ligand, 2,6-bis[((2-pyridylmethyl)(6-methyl-2-pyridylmethyl)amino) methyl]-4-methylphenol (HBPLMP). Complex I has been characterized by X-ray diffraction method as having (μ-phenoxo)bis(acetato)diiron core. Complex 1 was crystallized in the monoclinic space group C2/c with the following cell parameters: a=41.620(6) Å, b=14.020(3) Å, c=27.007(4) Å, β=90.60(2)°, and Z=8. The iron centers in the complex 1 are ordered as indicated by the difference in the Fe-O bond lengths which match well with typical $Fe^{III}-O\; and\; Fe^{II}-O$ bond lengths. Complex 1 has been studied by electronic spectral, NMR, EPR, SQUID, and electochemical methods. Complex 1 exhibits strong bands at 592 nm, 1380 nm in $CH_3CN$ (ε = 1.0 × 103 , 3.0 × 102). These are assigned to $phenolate-to-Fe^{III}$ and intervalence charge-transfer transitions, respectively. Its NMR spectrum exhibits sharp isotropically shifted resonances, which number half of those expected for a valence-trapped species, indicating that electron transfer between $Fe^{II}\;and\;Fe^{III}$ centers is faster than NMR time scale. This complex undergoes quasireversible one-electron redox processes. The $Fe^{III}_2/Fe^{II}Fe^{III}\;and\;Fe^{II}Fe^{III}/Fe^{II}_2$ redox couples are at 0.655 and -0.085 V vs SCE, respectively. It has $K_{comp}=3.3{\times}10^{12}$ representing that BPLMP/bis(acetate) ligand combination stabilizes a mixed-valence $Fe^{II}Fe^{III}$ complex in the air. Complex 1 exhibits a broad EPR signal centered near g=1.55 which is a characteristic feature of the antiferromagnetically coupled high-spin $Fe^{II}Fe^{III}$ system $(S_{total}=1/2)$. This is consistent with the magnetic susceptibility study showing the weak antiferromagnetic coupling $(J= - 4.6\;cm^{-1},\; H= - 2JS_1{\cdot}S2)$ between $Fe^{II}\; and \;Fe^{III}$center.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.113-117
• /
• 2020

In this paper, We investigated the effect of heat treatment process using photo-thermal effect in order to improve mechanical properties of nanostructure on polymer films made by nanoimprint process with hybrid resin. Nanostructures which have a low refractive characteristic were fabricated by UV nanoimprint and after that heat treatment was performed using IPL (intense pulsed light) under process condition of 550 V voltage, pulse width 5 ms, frequency 0.5 Hz. The transmittance and mechanical property of fabricated nanostructure films were evaluated to observe changes in the pattern transfer rate and mechanical properties of nanostructures. The transmittance of the nanostructure was measured at 97.6% at 550 nm wavelength. Nanoindentation was performed to identify improved anti-scatch properties. Result was compared by the heat source. In case of post treatment with IPL, hardness was 0.51 GPa and in the case of hotplate was 0.27 GPa, resulting the increase of hardness of 1.8 times. Elastic modulus of IPL treated sample was 5.9GPa and Hotplate treated one was 4GPa, showing the 1.4 time increase.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.3
• /
• pp.375-382
• /
• 1986

This study was carried out to obtain the basic information for the clarification of spring growth habits mechanism of naked barleys. The isozyme patterns and activities of peroxidase in the young spike and leaf blade were analyzed during the differentiation and development of young spike. The characteristic differences between the normal and rosetted type were in c and g isozymes in young spike, and in i isozyme in the leaf blade. In the normal type, c and i isozymes disappeared at the stage of spi-kelet differentiation, g isozyme at the stage of flolet differentiation. But, in the rosetted type, those three isozymes remained in dark stained condition until the time of final sampling. Especially, those three isozymes were higher in the rosetted type than those in the normal type even at the stage of bract differentiation(BDS), just prior to the reproductive stage. The activities of peroxidase decreased slowly after BDS in the young spike and leaf blade in the normal type, While, in the rosetted type, increased linearly, and the degree of increasing was remarkable in the young spike. It was interesting that the degree of activities in young spike was higher in the rosetted type than that in the normal type even at BDS. From the above results, the remarkable differences of the isozyme patterns and activities at BDS between the normal and rosetted type were considered to be the physiological expression of the varieties concerned with the degree of spring growth habits.

• Economic and Environmental Geology
• /
• v.12 no.2
• /
• pp.51-73
• /
• 1979

The zinc-lead deposits at the Yeonhwa I mine were investigated in terms of ore-forming geologic setting, structural style of ore control, geometry of individual orebodies, zoning, paragenesis and chemical composition of skarn minerals, as well as metal grades and ratios of selected orebodies. The Yeonhwa I mine is characterized by a large swarm of chimney type massive orebodies with thin skarn envelopes, boldly developed through a thick sequence of Pungchon Limestone, the overlying Hwajeol Formation, and the underlying Myobong Slate of Cambrian age. Nearly 20 orebodies of similar shape, but of varying size are arranged in a V-shaped pattern with northwest and northeast trends, clearly indicating an outstanding ore control by a conjugate system of fractures with these trends. Important orebodies are the Wolam 1, 2, 3, and 5 orebodies in the west, and the Namsan 1, 2, 3. and 5 orebodies in the east, among others. The Wolam 1 orebody, which was observed from the -360 level through the -240, -120, and 0 levels to the surface outcrops (totaling a vertical height of about 500m), shows a vertical variation in skarn mineralogy, ranging from pyroxene-garnet zone on the lower levels. through pyroxene (without garnet) zone on the intermediate levels, and finally to rhodochrosite vein on the upper levels and surface. Microprobe analyses of pyroxene and garnet on a total of 14 mineral grains revealed that pyroxenes are manganoan salitic in most samples, with downward increase of Fe and Mn, whereas garnets are highly andraditic, containing fractions of subordinate grossular with downward decrease of Fe. This indicates a reverse relationship of Fe-contents between pyroxene and garnet with depth. Ore minerals are major sphalerite, subordinate galena, and minor chalcopyrite. Sulfide gangue minerals include major pyrrhotite, and minor pyrite and marcasite of later age. Two types of variational trends in metal grades and ratios with depth are present on the plots of assay data from the Wolam orebodies: one is a steady upward increase in Pb, Zn, and Pb:Zn ratios, with a terminal decline at the top of orebody: the other is an irregular or sinusoidal change. The former is characteristic of chimney-type orebodies, whereas the latter is of vein· shaped orebodies. The Pb grades show large variations among orebodies and from level to level, whereas the Zn grades are relatively constand or less variable.

• Korean Journal of Plant Taxonomy
• /
• v.31 no.4
• /
• pp.311-319
• /
• 2001

In order to evaluate taxonomic status of Latcuca hallaisanensis H. $L{\acute{e}}v$., an endemic species of the Jeju-do Island, we investigated fruit wall structure and chromosome morphology. The fruit wall structure had 10-11 obtuse costae in the transverse section. The costa was wholly occupied by libriform fiber cells, and the underlying fibersclereid tissue was only one to three cells layers thick. Also, the intercosta lacked fiber-sclereid layers. Somatic chromosome numbers and karyotype of Latcuca hallaisanensis were recorded for the first time. This diploid species (2n=10) with the same basic number of x=5 has the total chromosome length $23.3{\mu}m$ and the length of each chromosome falls in $1.9{\mu}m-2.9{\mu}m$. It possess the karyotype complement i.e., 3sm+2st and a characteristic chromosome pair (No. 1 and 2) with a secondary constriction at the distal portion of the short arms. The overall similarity in external morphology (involucre, achene etc), chromosome morphology as well as in fruit wall anatomy between Lactuca hallaisanensis and Crepidiastrum s. lat. clearly indicated that this species should be treated as Crepidiastrum, rather than Lactuca.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.183-184
• /
• 2013

Two main MBE growth techniques have been used: plasma-assisted MBE (PA-MBE), which utilizes a rf plasma to supply active nitrogen, and ammonia MBE, in which nitrogen is supplied by pyrolysis of NH3 on the sample surface during growth. PA-MBE is typically performed under metal-rich growth conditions, which results in the formation of gallium droplets on the sample surface and a narrow range of conditions for optimal growth. In contrast, high-quality GaN films can be grown by ammonia MBE under an excess nitrogen flux, which in principle should result in improved device uniformity due to the elimination of droplets and wider range of stable growth conditions. A drawback of ammonia MBE, on the other hand, is a serious memory effect of NH3 condensed on the cryo-panels and the vicinity of heaters, which ruins the control of critical growth stages, i.e. the native oxide desorption and the surface reconstruction, and the accurate control of V/III ratio, especially in the initial stage of seed layer growth. In this paper, we demonstrate that the reliable and reproducible growth of GaN on Si (110) substrates is successfully achieved by combining two MBE growth technologies using rf plasma and ammonia and setting a proper growth protocol. Samples were grown in a MBE system equipped with both a nitrogen rf plasma source (SVT) and an ammonia source. The ammonia gas purity was ＞99.9999% and further purified by using a getter filter. The custom-made injector designed to focus the ammonia flux onto the substrate was used for the gas delivery, while aluminum and gallium were provided via conventional effusion cells. The growth sequence to minimize the residual ammonia and subsequent memory effects is the following: (1) Native oxides are desorbed at $750^{\circ}C$ (Fig. (a) for [$1^-10$] and [001] azimuth) (2) 40 nm thick AlN is first grown using nitrogen rf plasma source at $900^{\circ}C$ nder the optimized condition to maintain the layer by layer growth of AlN buffer layer and slightly Al-rich condition. (Fig. (b)) (3) After switching to ammonia source, GaN growth is initiated with different V/III ratio and temperature conditions. A streaky RHEED pattern with an appearance of a weak ($2{\times}2$) reconstruction characteristic of Ga-polarity is observed all along the growth of subsequent GaN layer under optimized conditions. (Fig. (c)) The structural properties as well as dislocation densities as a function of growth conditions have been investigated using symmetrical and asymmetrical x-ray rocking curves. The electrical characteristics as a function of buffer and GaN layer growth conditions as well as the growth sequence will be also discussed. Figure: (a) RHEED pattern after oxide desorption (b) after 40 nm thick AlN growth using nitrogen rf plasma source and (c) after 600 nm thick GaN growth using ammonia source for (upper) [110] and (lower) [001] azimuth.

• Journal of Life Science
• /
• v.34 no.1
• /
• pp.9-17
• /
• 2024

Diabetes mellitus (DM) is one of the main global health problems. Chronic exposure to hyperglycemia can lead to cellular dysfunction that may become irreversible over time, a process that is termed glucose toxicity. Our perspective about glucose toxicity as it pertains to the pancreatic β-cell is that the characteristic decreases in insulin secretion are caused by regulated apoptotic gene expression. In this study, we examined whether ferulic acid protects INS-1 pancreatic cells against high glucose-induced apoptosis. High glucose concentration (30 mM) induced glucotoxicity and death of INS-1 pancreatic β cells. However, treatment with 1, 5, 10, or 20 μM ferulic acid increased the cell viability in a concentration-dependent manner. Treatment with ferulic acid dose-dependently decreased the intracellular levels of reactive oxygen species, thiobarbituric acid reactive substances, and nitric oxide in INS-1 pancreatic β cells pretreated with high glucose. These effects influence the apoptotic pathway, increasing the expression of the anti-apoptotic protein Bcl-2 and reducing the levels of pro-apoptotic proteins, including Bax, cytochrome C, and caspase 9. Annexin V/propidium iodide staining indicated that ferulic acid significantly reduced high glucose-induced apoptosis. These results demonstrate that ferulic acid is a potential therapeutic agent to protect INS-1 pancreatic β cells against high glucose-induced apoptosis.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.155-166
• /
• 2016

It is important to configure capacitance(C) of the capacitor and the induction coefficient(L) of the work coil on the resonant circuit design stage in order to induce heating on the object by a precise and constant frequency components in the electromagnetic induction heating equipment. Work coil conducts a direct induction heating according to heating point and area of the object which has a fixed heat factor so that work coil is designed to has fixed value. On the other hands, Capacitor should be designed to be changed in order to be the higher the utilization of the entire equipment. It is extracted the samples by variation of single electrode capacity from the selection stage of raw materials for capacity to the stage of process design for output of the high frequency LC resonance of 700kHz on 1000 VAC maximum voltage and current to $200I_{MAX}$. It is suggested fundamental experiment results in order to prove relation for the optimal design of HF-LC resonance conduction-cooled capacitor based on the response of frequency characteristics and results of output parameters according to variation of the capacitance size.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.455-462
• /
• 2000

The objective of this study was to examine the physicochemical characteristics of coagulation reaction between loess and red tide organisms (RTO) and its feasibility, in developing a technology for the removal of RTO bloom in coastal sea. The physicochemical characteristics of loess were examined for a particle size distribution, surface characteristics by scanning electron microscope, zeta potential, and alkalinity and pH variations in sea water. Two kinds of RTO that were used in this study, Cylindrothen closterium and Skeietonema costatum, were sampled in Masan bay and were cultured in laboratory. Coagulation experiments were conducted using various concentrations of loess, RTO, and a jar tester. The supernatant and RTO culture solution were analyzed for pH, alkalinity, RTO cell number. A negative zeta potential of loess increased with increasing pH at $10^(-3)M$ NaCl solution and had -71.3 mV at pH 9.36. Loess had a positive zeta potential of +1,8 mV at pH 1.98, which resulted in a characteristic of material having an amphoteric surface charge. In NaCl and $CaCl_2$, solutions, loess had a decreasing negative zeta potential with increasing $Na^+\;and\;Ca^(+2)$ ion concentration and then didn't result in a charge reversal due to not occurring specific adsorption for $Na^+$ ion while resulted in a charge reversal due to occurring specific adsorption for $Ca^(+2)$ ion. In sea water, loess and RTO showed the similar zeta potential values of -112,1 and -9.2 mV, respectively and sea sand powder showed the highest zeta potential value of -25.7 mV in the clays. EDLs (electrical double-layers) of loess and RTO were extremely compressed due to high concentration of salts included in sea water, As a result, there didn't almost exist EDL repulsive force between loess and RTO approaching each other and then LVDW (London-yan der Waals) attractive force was always larger than EDL repulsive force to easily form a floe. Removal rates of RTO exponentially increased with increasing a loess concentration. The removal rates steeply increased until $800 mg/l$ of loess, and reached $100{\%}$ at 6,400 mg/l of loess. Removal rates of RTO exponentially increased with increasing a G-value. This indicated that mixing (i.e., collision among particles) was very important for a coagulation reaction. Loess showed the highest RTO removal rates in the clays.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.25 no.1
• /
• pp.84-103
• /
• 2012

Objectives : The middle school students'life style were studied with focus on Body Mass Index(BMI). Information was collected during 1st June 2009 to 10th July from 397 students(both male and female) by the subjective survey centered on personal characteristic, understanding about health in general, everyday activities, eating habits, preference in food, understanding about diet and obesity, and thoughts about fitness and diet. Methods : Students were selected from six classes by convenience sampling, then the final analysis was performed on 397 self-administered questionnaires, excepting 5 questionnaires, which have insincere answers. The data collection was carried out by SPSS(V.14.0 English Version), and the data was verified by $x^2$-test, ANOVA, multiple regression analysis. Results and Conclusion : The survey subjects were in the following distribution of body weights - underweight: 63.6%, normal weight: 29.5% and 6.9% were overweight. There was significantly different between BMI and mothers' occupation and satisfaction with school life(p<0.05). As for the analysis(multiple regression analysis) on understanding about health, the factors that affect BMI are self recognition of figure and efforts to reduce weight. In terms of efforts for one's own health, 78.2% of under weight and 82.3% of normal weight were taking active initiatives. But 85.2% of the overweight students were not giving any efforts. As for the free time activities, more than half answered, 'playing with computers'(48.4 - 66.7%, 1.57 hours on average). As for TV, on average, 2.03 hours were spent in overall. And it turned out that the overweight students spent more time watching TV by 46.49 minutes(0.77 hours) on average(p<0.05). 7.4 hours was the average sleeping time. As for the eating habit,'quantity of meal, snack, meal between meals, fat reduction, and supplementary food'were shown to be related to the BMI(p<0.05). The instant food, meat and sweet food were shown to be also related to the BMI. In terms of knowledge about overweight and diet, only 8 students(2% of the total) answered all 10 questions correct. On average, 7-8 questions were correctly answered(53.9 %). When the scores were analyzed against the BMI by classifying the scores to high, middle and low categories, it showed a relationship by different weight group(p<0.02), and the overweight students had higher score by 0.82 compared to the underweight students. When thoughts and attitude on fitness and diet were analyzed in relationship to the BMI, the result was only - "I try to eat fruits more often"(fruits)(p<0.00).