• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.461-470
• /
• 1999

This paper presents the description of a 4-bit digital p-i-n diode phase shifter that was designed for quasimillimeter wave band satellite receiver to use in phased-array systems. 180$^{\circ}$ and 90$^{\circ}$ cells are designed in reflection type that consists of a 3-dB rat-race hybrid coupler, 45$^{\circ}$ and 22.5$^{\circ}$ cells are designed in loaded-line type to reduce the size of circuit and the number of diode to be used. The 4-bit phase shifter uses eight p-i-n diodes mounted in the microstrip circuit. The average insertion loss for the 16 phase states is 6.92dB over the 19.8~20.3 GHz band and maximum phase error is 6.2$^{\circ}$ at 20 GHz.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.24-30
• /
• 2019

The successful results of the treatment using a double crown denture have been reported in several papers for some of the few remaining teeth in patient. In particular, double crown dentures may be an alternative to treatment in cases where the periodontal status is poor and clasp type removable partial dentures are inappropriate (crown/root ratio > 1). In this case, the patient visited clinic with a chief complaint of difficulty in mastication due to loss of posterior teeth and overall teeth mobility. After teeth with severe periodontitis were extracted, treatment plan of mandible is Kennedy class I removable partial denture (RPD) and treatment plan of maxilla is hybrid telescopic double crown RPD with a friction pin. Patient is well adapted after the prosthetic treatment and we report due to achieving satisfactory results in pronunciation, mastication, retention and aesthetics.

• Applied Biological Chemistry
• /
• v.10
• /
• pp.15-21
• /
• 1968

In order to fractionate the rice protein employing paper electrophoresis, 9 subjects of Korean rice and one Indica type, Pin Galw 50 were examined, the results were as follows. 1. Polished rice protein was separated into albumin, globulin, prolamine, and oryzenin. The amount of these fractions was determined by Kjeldahl method showing respectively 0.26%, 0.65%, 0.41%, and 5.01% in average. Albumin was extracted with deionized water, globulin with 10% NaCl, prolamine with 70% ethanol, and oryzenin with 0.05N-NaOH. 2. Albumin was extracted with deionized water and dialyzed by a cellophan tube. The supernatant was submitted to paper electrophoresis using phosphate buffer (pH 7.6, ${\mu}$ 0.18). Albumin was identified as monocomponent in all of 10 varieties under study. Globulin was extracted and dialyzed to remove the albumin. The precipitates were resolved in 10% saline solution and examined by paper electrophoresis. The globulin consists of two components in phosphate buffer(pH 7.6, ${\mu}$ 0.18) Any subject, regardless the origin, appears to contain globulin I and globulin II. Prolamine was extracted with 70% ethanol, dialayzed against deionized water, resolved with ethanol, and analyzed by Paper electrophoresis. It was proved as one component in the 70% alcoholic buffer(pH 9.0, ${\mu}$=0.0095). On the contrary, paper electrophoresis with oryzenin demonstrated two or three components in Sorensen's buffer(pH 13.0, ${\mu}$ 0.11). Yookoo 132, Dungpan 5, Kwansan, and Jaekun contain oryzenin I, oryzenin II, and oryzenin III. On the other hand, Paldal, Jinheung, Sukwang, Eunbangzu, Damakum, and Pin Galw 56 contain only oryzenin II, and oryzenin III. On the basis of these analyses a discussion of the differences between the protein fractions of 10 varieties was presented. 3. Globulin I varied from 0.22% to 0.46% (aver. 0.35%) in the amount, globulin II from 0.21 to 0.44%(aver. 0.32%), oryzenin I from 0.17% to 0.44%(aver. 0.3%), oryzenin II from 1.59% to 2.88%(aver. 2.23%), and oryzenin III from 2.02% to 3.57%(aver. 2.66%).

• Korean Journal of Veterinary Research
• /
• v.42 no.3
• /
• pp.411-418
• /
• 2002

Thirty rabbits underwent femoral lengthening using monolateral external fixator to evaluate results and complications of limb lengthening. Twenty rabbits survived until consolidation of callus formed at the lengthening site after finishing lengthening. Ten rabbits were sacrificed during femoral lengthening because of complications. Survived 20 rabbits were classified to two groups according the amount of lengthening: group I (10% lengthening of the femoral length); group II (20% lengthening). There was no significant difference of consolidation time between two groups (p=0.25). Varus angulation at the lengthening site occurred in 60% of two groups and the amount of varus angulation in group II was larger than that of group I. Degenerative change of articular cartilage at the medial condyle of the distal femur was found in 30% of group II. Of sacrificed ten rabbits, 5 had pin loosenings with pull an of pins from the femur, 2 had fermoral fractures around the pin-tract site, and 3 had severe osteomyelitis of the femur around the pin-tract site.

• Tribology and Lubricants
• /
• v.15 no.3
• /
• pp.265-271
• /
• 1999

Wherever there are rotating equipment and contact between surface, there is wear and the generation of wear particles. The particles contained in the lubricating oil carry detailed and important information about the condition monitoring of the machine. This information may be deduced from particle shape, composition, size distribution, and concentration. Therefore, This paper was undertaken to Ferrography system of wear debris generated from lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of Pin and V-Block type by Ti(C, N) coated. It was shown from the test results that wear particle concentration (WPC) and wear severity Index( $I_{S}$), size distribution in normal and abnormal wear have come out all the higher value by increases sliding friction time. Wear shape is observed on the Ferrogram it was discovered a thin leaf wear debris as well as ball and plate type wear particles. This kind of large wear shape have an important effect not only metals damage, but also seizure phenomenon.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.439-448
• /
• 2003

An image processing algorithm was developed for a robot system which was used in gene study. The robot system achieved a job of colony picking. The colony included DNA of an organism. The robot picked up the colony in petri-dish, which included the cultivated colony in medium, by a picking pin, and moved the colony to wellplates. The vision system consisted of an image acquisition system which acquired the image information of colony, an illumination device which irradiated the object once when it got the image of it, a computer and so on. The image processing algorithm distinguished the colony and detected colony positions. Performance test of the developed algorithm showed that the distinguishing success rate of colony and detecting success rate of colony positions were over 96%.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.110-119
• /
• 1996

A novel high speed VLSI architecture and its VLSI realization methodologies for a motion estimation processor based on full search block matching algorithm are presentd. The presented architecture is designed in order to be suitable for highly parallel and pipelined processing with identical PE's and adjustable in performance and hardware amount according to various application areas. Also, the throughput is maximized by enhancing PE utilization up to 100% and the chip pin count is reduced by reusing image data with embedded image memories. Also, the uniform and identical data processing structure of PE's eases VLSI implementation and the clock rate of external I/O data can be made slower compared to internal clock rate to resolve I/O bottleneck problem. The logic and spice simulation results of the proposed architecture are presented. The performances of the proposed architecture are evaluated and compared with other architectures. Finally, the chip layout is shown.

• Journal of the Korean Home Economics Association
• /
• v.44 no.10
• /
• pp.79-90
• /
• 2006

The purpose of this study was to make new suggestions for the production of high value-added, fashion goods by reviewing and synthesizing the design of dress shirts. (Ed-I've combined paragraphs here) For this study, 1491 photographs on the dress shirts were collected for analysis from men's collection$(2001\sim2006)$. Concerning the actual characteristics of men's fashion design, the following conclusions were obtained from the analysis of the dress shirts of men's collection. (Ed-I've combined paragraphs here) First, feminine ornaments such as frill, pin tuck, and embroidery can be seen in men's dress shirts and men's sexuality has changed into a softer men's image. Second, asymmetry balance using detachability are expressed in the collars, sleeves, and plackets of men's dress shirts. Third, in a very novel suggestion, a combination of two items was designed in a dress shirt and variant shirt forms were created. Fourth, formal style is mainly shown in men's shirts and the traditional classic is increasingly becoming emphasized recently

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.293-294
• /
• 2003

최근 다양화된 합섬소재의 등장으로 인해 원사가 다양화되고 그에 따른 가공기술 등의 공정이 복잡해짐에 따라 이들 소재의 기본이 되는 원사의 물성은 여러 공정들을 거치게 되면서 그 역학적 물성들이 변화하게 된다. 원사이후의 공정 특히 사가공 공정에서의 공정에 따른 絲의 물성을 파악하는 것은 직물의 물성 예측에 중요하다. 원사를 가공하는 공정 중 Belt type의 가연기구는 絲손상이 크고 가연 torque가 크며 특히 belt spped의 변화에 의해 적당한 장력이 선정되기 때문에 Pin type과 frictin disk type에서 설정 불가능한 낮은 T$_2$(Untwisting Tension) 장력범위의 가공도 가능하여 부가가치가 높은 絲의 가공이 가능하다. (중략)

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.535-536
• /
• 2006

In the embedded system, external device interface that operates serial protocol with lower speed than the general computers is used commonly. This paper describes I2C bus protocol that is a bi-directional serial bus with a two-pin interface. The I2C bus requires a minimum amount of hardware to relay status and reliability information concerning the processor subsystem to an external device.