• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.3
• /
• pp.193-198
• /
• 2002

In this paper, we Propose a PD+I fuzzy controller using an error-accumulating applying factor. In fuzzy control, analytical study was done formerly, in which fuzzy control can be classified by PD type and PI type, and also the study for getting merits of both types was done, too. But the mixed type has a complex structure and many parameters. The proposed fuzzy controller is 2-input 2-out-put and PD type fuzzy control is used as a basic structure. And the proposed controller annihilates a steady-state error and improves transient responses because of using the error-accumulating applying factor which is determined in the real time along the current state of controlled process. Futhermore it is easy to tune the system because of decreasing the number of scaling factors and the I type controller with resetting resolves the integral wind-up problem. Finally we apply the proposed scheme to various plants and show the performance betterment.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.66-70
• /
• 2000

This paper deal with a design and a constant output power control of Zero Current Zero Voltage Switching(ZCZVS) resonant type DC-DC converter by a digital I-PD phase shift controller. When the DC-DC converter for a high density and a high effect control is operated in high speed switching, the switching loss and switching stress of the switching devices are increased. So, the ZCZVS method, which has the phase shift control with the digital I-PD controller, must be use in order to reduce its. And the constant output power voltage that controlled by the digital I-PD controller tracks a reference without steady state error in variable input voltage. The validity of control strategy that proposed is verified experimental results by the Digital Signal Processor TMS320C32.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.46-49
• /
• 2002

This paper presents I-PD controller design using LQR method in a two-inerita motor system to satisfy the design specification in time domain. And to provide a systematic LQ analysis for two-inerita motor system. The tuning parameters of LQ(I-PD) controller are determinated by the relationships between the design parameters of the overshoot and the settling time which are design specifications in time domain, and the weighting factors Q and R in LQR we can achieve the performance-robustness in time domain as well as the stability-robustness.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.483-483
• /
• 2000

The Fuzzy Preview Control (FPC) design methodology using I-PD Preview Control (IPC) and Optimal Preview Control (OPC)[6] are discussed in this paper. First we show a new fuzzy controller with single input single output, and build a relationship between it and the I-PD Control proposed by Kitamari, as well as Optimal Control with some specific equations. We also give the stability analysis with Lyapunov theorem. On this way, we can design a Fuzzy I-PD Controller (FIC) very easier and more effective. Then, preview control element design methodology of FCP was given according to IPC and OPC. Third, to make the system more rapidly and more little overshooting, two factors are given to adjust the controller's properties. At last, the performance of FPC is revealed via computer simulation using a nonlinear plant.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.179.5-179
• /
• 2001

Generally, while PD-type fuzzy controller has good performance in transient period, it has uniform steady state error of response. To improve limitations of PD-type fuzzy controller, we propose a new fuzzy controller to improve the performance of transient response and to eliminate the steady state error of response. In this paper, PD-type fuzzy controller is used a simplified indirect inference method(SIIM). When the SIIM is applied, the proposed method has the capability of the high speed inference and adapting with increasing the number of the fuzzy input variables easily. The outputs of this controller are the output calculated by PD-type fuzzy controller and the accumulated error scaling factor. Here, the accumulated error scaling factor is adjusted by fuzzy rule according to the system state variables. To show the usefulness of the proposed controller, it is applied to 0-type 2nd-order linear system.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.42-45
• /
• 2002

In the two-mass motor drive system driving a load through a flexible shaft or transmission system, a shaft torsional vibration is often generated. The overshoot of the motor drive system easily causes vibration. In this case I-PD controller has been generally used in speed control, because of the simplicity of structure. This paper using an analytical pole assignment design, proposes the overshoot formulas, and the settling time formula. The objective of this paper is to provide a design method of I-PD controller by using overshoot formulas, and settling time formula. The simulation results show that we can design the controller with desired overshoot and settling time.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.563-569
• /
• 2015

A chemical reaction occurring in CSTR (Continuous Stirred Tank Reactor) is significantly affected by the concentration, temperature, pressure, and reacting time of materials, and thus it has strong nonlinear and time-varying characteristics. Also, when an existing linear PID controller with fixed gain is used, the performance could deteriorate or could be unstable if the system parameters change due to the change in the operating point of CSTR. In this study, a technique for the design of a fuzzy PD plus I controller was proposed for the temperature control of a CSTR process. In the fuzzy PD plus I controller, a linear integral controller was added to a fuzzy PD controller in parallel, and the steady-state performance could be improved based on this. For the fuzzy membership function, a Gaussian type was used; for the fuzzy inference, the Max-Min method of Mamdani was used; and for the defuzzification, the center of gravity method was used. In addition, the saturation state of the actuator was also considered during controller design. The validity of the proposed method was examined by comparing the set-point tracking performance and the robustness to the parameter change with those of an adaptive controller and a nonlinear proportional-integral-differential controller.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.84-90
• /
• 2004

Many control techniques have been proposed in order to improve the control performance in the control system. In the feedback control system the output of controller is generally used as the input of a plant But the undesired noise is included in the output of a controller. Therefore, there is a need to use a precompensator for rejecting the undesired noise and improving the response characteristic of a system. In this paper, the design method of a precompensator is proposed for the model following control in the I-PD control system. The proposed precompensator is implemented with a neural network. The games of a precompensator are adjusted automatically to obtain a desired response of a system when the response characteristic of a system is changed under a condition.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.134-139
• /
• 2007

A delivery ship is used to handle the cargo with the crane to/from the ships. The ship is inclined in the direction of a cargo which is hung on a crane. In this case, a arc shaped rail should be in the equilibrium state to get good anti-rolling performance. In this study, a device and control algorithm are developed to take accurate and quick equilibrium of the rail. The device is composed of a hinged immovable support, screw jack and damper. And the control system is based on I-PD control law to consider of control input saturation and overshoot. The controller is composed of integral controller of feedforward path and proportional-derivative controller of feedback path. The parameters of controller is designed to follow the reference signal and to remove overshoot. The simulation results show that the desirable control performance is achieved.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.754-756
• /
• 2000

In this paper, the I-PD control algorithm using the coefficient diagram method(CDM) controller design of the Linear DC Motor(LDM) is presented. Recently LDM has been used to obtain the fine results of the dynamic characteristic for straightly moving condition. The I-PD control algorithm has a robust response to force disturbance. The effectiveness of I-PD is shown by simulations and comparison with PID.