• Journal of Preventive Medicine and Public Health
• /
• v.49 no.2
• /
• pp.118-128
• /
• 2016

Objectives: The purposes of this study were to examine the status of children and adolescents with regard to enrollment in private medical insurance (PMI) and to investigate its influence on their utilization of medical services. Methods: The present study assessed 2973 subjects younger than 19 years of age who participated in five consecutive Korea Health Panel surveys from 2009 to 2012. Results: At the initial assessment, less than 20% of the study population had not enrolled in any PMI program, but this proportion decreased over time. Additionally, the number of subjects with more than two policies increased, the proportions of holders of indemnity-type only ('I'-only) and of fixed amount+indemnity-type ('F+I') increased, whereas the proportion of holders with fixed amount-type only ('F'-only) decreased. Compared with subjects without private insurance, PMI policyholders were more likely to use outpatient and emergency services, and the number of policies was proportionately related to inpatient service utilization. Regarding outpatient care, subjects with 'F'-only PMI used these services more often than did uninsured subjects (odds ratio [OR], 1.69), whereas subjects with 'I'-only PMI or 'F+I' PMI utilized a broad range of inpatient, outpatient, and emergency services relative to uninsured subjects (ORs for 'I'-only: 1.39, 1.63, and 1.38, respectively; ORs for 'F+I': 1.67, 2.09, and 1.37, respectively). Conclusions: The findings suggest public policy approaches to standardizing PMI contracts, reform in calculation of premiums in PMI, re-examination regarding indemnity insurance products, and mutual control mechanisms to mediate between national health insurance services and private insurers are required.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.215-218
• /
• 2002

A control strategy for a dynamic system under irregular disturbance by using stochastic controller is developed. In order to design stochastic controller, system dynamic model in real domain i transformed dynamic moment equation in stochastic domain by F-P-K approach. A study of real time control technique four stochastic controller is performed in this paper.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.654-661
• /
• 2019

This study assessed the stabilization of fluorine (F)-contaminated soil using calcium hydroxide (Ca(OH)₂) and the consequent changes in human health risk. The bioavailable F decreased to 3.5%, (i.e., 57.9 ± 1.27 mg/kg in 6% Ca(OH)₂-treated soil sample) from 43.0%, (i.e., 711 ± 23.4 mg/kg in control soil sample). This resulted from the conversion of water-soluble F to stable calcium fluoride, which was confirmed by XRD spectrometry. Soil ingestion, inhalation of fugitive dust from soil, and water ingestion were selected as exposure pathways for human health risk assessment. Non-carcinogenic risks of F in soils reduced to less than 1.0 after stabilization, ranging from 4.2 to 0.34 for child and from 3.0 to 0.25 for adult. Contaminated water ingestion owing to the leaching of F from soil to groundwater was considered as a major exposure pathway. The risks through soil ingestion and inhalation of fugitive dust from soil were insignificant both before and after stabilization, although F concentration exceeded the Korean soil regulatory level before stabilization. Our data suggested that substantial risk to human health owing to various potential exposure pathways could be addressed by managing F present in soil.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.1
• /
• pp.125-132
• /
• 2001

This study was carried out to investigate the effect of multi or single application of fluoride plus 0.05% NaF solution on the remineralization of dental caries lesion. The microhardness changes of enamel surface were measured after application of fluoride and precipitation of 0.05% NaF solution on 6 groups of cow's tooth on which the artificial carious lesions were formed first. Test groups were calssified into two step application with NaF, $SnF_2$ and APF under different application time conditions plus 0.05% NaF solution(group I, II, III, IV) and single application with APF plus 0.05% NaF solution (group V) and control(0.05% NaF solution only, group IV). The obtained results were as follows. 1. Regarding microhardness change of enamel surface. microhardness increments in group I(NaF for 1 minute+APF for 3 minutes+0.05% NaF solution for 1 minute), II($SnF_2$ 1 min+APF 3 min+NaF sol.), III($SnF_2$ 2 min+APF 2 min+NaF sol.), IV(NaF 2 min+APF 2 min+NaF sol.) and V(APF 4 min+NaF sol.) were significantly greater than group VI.(P<0.05) 2. Microhardness changes of shorter application time of $SnF_2$ (group II) were significantly greater than group III. (P<0.05) 3. Microhardness changes were variable with kinds of fluoride, application sequence and application time of fluoride. but had no relation with the number of fluoride application.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.253-254
• /
• 2016

This paper proposes a novel starting method of a high speed induction motor with air bearings for turbo blowers. The friction of air bearings varies according to rotating speed, operating temperature and usage time. Specially, friction torque at initial starting state under low bearing temperature usually results in starting failures of the conventional V/F control method. Therefore, this paper proposes a new starting method, which consists of an initial I/F control mode and smooth transition method to V/F control mode to overcome the starting failure. The experimental results are shown to verify the analysis and the usefulness of the proposed method.

• Communications for Statistical Applications and Methods
• /
• v.4 no.2
• /
• pp.581-588
• /
• 1997

Univariate F test is based on the multisample sphericity assumption. Robustness for tests of a main effect of the within-subjects factor was investigated when the assumptions of the onmibus F tests are violated in a split-plot design with one between-subjects factor using untrimmed data and trimmed data. The results indicate that when sample sizes are unbalanced and dispersion matrices are heterogeneous, the CIGA and the $CIGA_T$ tests better control Type I error rates than do the $F_T$test and the$\widetilde{\xi_T}$test.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.328-331
• /
• 2006

In Ubiquitous age, data collection that using wireless sensor node is increasing necessity. In this paper, collect data because uses PIC16F877 and Bluetooth, and constructs database in PC. The PIC16F877 is control radio sensor node. The PC construct to propose algorithm that updates control data with table. It is changes sensing cycle time of node into intelligence style because compare collected data of DB. Result of study inexpensive , and practical, and I can apply to industry spot constructing system briefly.

• Journal of Power Electronics
• /
• v.4 no.4
• /
• pp.217-227
• /
• 2004

A robust controller that combines the merits of the feed-back, feed-forward and model-following control for induction motor drives utilizing field orientation control is designed in this paper. The proposed controller is a two-degrees-of­freedom (2DOF) integral plus proportional & rate feedback (I-PD) speed controller combined with a model-following (2DOF I-PD MFC) speed controller. A systematic mathematical procedure is derived to find the parameters of the 2DOF I-PD MFC speed controller according to certain specifications for the drive system. Initially, we start with the I-PD feed­back controller design, then we add the feed-forward controller. These two controllers combine to form the 2DOF I-PD speed controller. To realize high dynamic performance for disturbance rejection and set point tracking characterisitics, a MFC controller is designed and added to the 2DOF I-PD controller. This combination is called a 2DOF I-PD MFC speed controller. We then study the effect of the 2DOF I-PD MFC speed controller on the performance of the drive system under different operating conditions. A computer simulation is also run to demonstrate the effectiveness of the proposed controller. The results verify that the proposed 2DOF I-PD MFC controller is more accurate and more reliable in the presence of load disturbance and motor parameter variations than a 2DOF I-PD controller without a MFC. Also, the proposed controller grants rapid and accurate responses to the reference model, regardless of whether a load disturbance is imposed or the induction machine parameters vary.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.427-429
• /
• 1993

In this paper, GIS (Geographical Information System) for KODAS (Korea Distribution Automation System) will be presented. It has been developed to display the status of distribution power line facilities with background geographical map information (eg. address, street, railways and building) and provides various menu screen that can be handled easily. We will discuss computer system I/F between Host computer and GIS, DB structure for GIS and It's functions.

• Korean Journal of Animal Reproduction
• /
• v.22 no.1
• /
• pp.95-99
• /
• 1998

Three experiments were conducted with follicular oocytes, to compare some somatic cells, growth factors and media for in vitro maturation of bovine oocytes. In the first experiment, the type of somatic cells had no effects on in vitro maturation of bovine follicular ooctyes. In the second experiment, oocytes were matured in TCM199 su, pp.emented with growth factors on IVM of bovine follicular oocytes, then all were co-cultured with cumulus cells. The proportion of used oocytes that developed to expanding blastocysts was 22.2%, 20.2%, 17.7%, 22.2%, 24.4% and 20.2% after maturation in TCM199 su, pp.emented with control, insulin, IGF-I, IGF-Ⅱ, FGF and EGF, respectively. In the third experiment, oocytes were matured in BO, Ham's F10 and TCM199, then all were fertilized in BO, and embryos cultured in BO, Ham's F10 and TCM199, respectively. Cleavage rates in BO were 90%, had higher than in Ham's F10(80%) or in TCM199(64%). But production of expanding blastocysts in TCM199(21%) or Ham's F10(20.6%), had higher than in BO(4.6%).