• 제목/요약/키워드: I-Cube

검색결과 173건 처리시간 0.028초

통발 어구를 이용한 서해 경기만 사각형어초 시설의 효과 평가 (Evaluation of the effect of cubic artificial reefs in Kyonggi Bay, west coast of Korea by using fish trap)

  • 유재원;이만우;이창근;김창수;김정수;홍재상
    • 수산해양기술연구
    • /
    • 제43권2호
    • /
    • pp.126-139
    • /
    • 2007
  • In the autumn of 2000 and spring of 2001, field surveys were conducted to estimate the effectiveness of artificial reefs (type cube, $2{\times}2{\times}2m^3$) that were established in the four islands of Bangnyeong, Socheong, Daeyeonpyeong and Ganghwa in Kyonggi Bay, the west coast of Korea during 1995 and 1996. The condition of reefs was examined through SCUBA diving and a side-scan sonar. Much of the reefs in Daeyeonpyeong and Ganghwa area were buried in bottom sediment. Despite an intensive search in Bangnyeong area, even a cluster of reefs was not found and most of them seemed to be buried by sand waves. Thus an appropriate investigation on the sediment transport should be included in pre-assessment for the expected performance and protection of artificial reefs. Distribution of average CPUE in natural fishing ground (control) was estimated by bootstrapping simulation and possible comparison of CPUE between control and reef areas (treatment) were made in Bangnyeong and Socheong (Experiment I). Positive reef effect was detected in Socheong but CPUE of treatment in Bangnyeong was varied between or lower than the 99% CPUE confidence intervals of the control. Control/treatment abundance and biomass of fishes and invertebrates were tested by paired t-test and sign test (Experiment II). Only four cases among 22 showed significant positive effect. Based on the results, the cube artificial reef in Socheong was inferred as an affirmative one. Floor type was hypothesized to be one of the probable agents in determining the effectiveness of artificial reefs.

A MULTI-DIMENSIONAL REDUCTION METHOD OF LARGE-SCALE SURVEY DATABASE

  • Lee, Y.;Kim, Y.S.;Kang, H.W.;Jung, J.H.;Lee, C.H.;Yim, I.S.;Kim, B.G.;Kim, H.G.;Kim, K.T.
    • 천문학논총
    • /
    • 제28권1호
    • /
    • pp.7-13
    • /
    • 2013
  • We present a multi-dimensional reduction method of the surveyed cube database obtained using a single- dish radio telescope in Taeduk Radio Astronomy Observatory (TRAO). The multibeam receiver system installed at the 14 m telescope in TRAO was not optimized at the initial stage, though it became more stabilized in the following season. We conducted a Galactic Plane survey using the multibeam receiver system. We show that the noise level of the first part of the survey was higher than expected, and a special reduction process seemed to be definitely required. Along with a brief review of classical methods, a multi-dimensional method of reduction is introduced; It is found that the 'background' task within IRAF (Image Reduction and Analysis Facility) can be applied to all three directions of the cube database. Various statistics of reduction results is tested using several IRAF tasks. The rms value of raw survey data is 0.241 K, and after primitive baseline subtraction and elimination of bad channel sections, the rms value turned out to be 0.210 K. After the one-dimensional reduction using 'background' task, the rms value is estimated to be 0.176 K. The average rms of the final reduced image is 0.137 K. Thus, the image quality is found to be improved about 43% using the new reduction method.

자기베어링 구동용 전자석의 흡인력에 대한 수학적 모델링 (Mathematical Modeling about Magnetic Attractive Force of Magnetic Bearing)

  • 최교호;양주호;정광교
    • 동력기계공학회지
    • /
    • 제16권3호
    • /
    • pp.64-68
    • /
    • 2012
  • Because the magnetic bearing supports levitating body without contact, wear, noise and vibration are very small comparing with mechanical bearings, it is very useful to high revolution machinery. In general, the magnetic attractive force function that is proportional to square of control current(x), and inversely proportional to square of an air gap(i) has been widely used. This paper proposed the new magnetic attractive force function that is proportional to cube of the control current, and inversely proportional to square of the air gap. The function was optimized to minimize the cost function that is the percentage of deviation about the change of a proportional constant(k), using the experimental data, ie, control currents and air gaps.

Attitude Control System Design & Verification for CNUSAIL-1 with Solar/Drag Sail

  • Yoo, Yeona;Kim, Seungkeun;Suk, Jinyoung;Kim, Jongrae
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제17권4호
    • /
    • pp.579-592
    • /
    • 2016
  • CNUSAIL-1, to be launched into low-earth orbit, is a cubesat-class satellite equipped with a $2m{\times}2m$ solar sail. One of CNUSAIL's missions is to deploy its solar sail system, thereby deorbiting the satellite, at the end of the satellite's life. This paper presents the design results of the attitude control system for CNUSAIL-1, which maintains the normal vector of the sail by a 3-axis active attitude stabilization approach. The normal vector can be aligned in two orientations: i) along the anti-nadir direction, which minimizes the aerodynamic drag during the nadir-pointing mode, or ii) along the satellite velocity vector, which maximizes the drag during the deorbiting mode. The attitude control system also includes a B-dot controller for detumbling and an eigen-axis maneuver algorithm. The actuators for the attitude control are magnetic torquers and reaction wheels. The feasibility and performance of the design are verified in high-fidelity nonlinear simulations.

콘크리트의 압축강도에 공시체의 크기와 형상이 미치는 영향 (Effect of Specimen Sizes and Shapes on Compressive Strength of Concrete)

  • 최중철;양은익;이성태;김명유;이광교
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.285-288
    • /
    • 2003
  • The compressive strength of concrete is used as the most fundamental and important material property when reinforced concrete structures are designed. It has been problem to use this value, however, because the control specimen sizes and shapes are different from every country. In this study, the effect of specimen shapes and sizes on compressive strength of concrete members was experimentally investigated based on fracture mechanics. Experiments for the mode I failure was earned out by using cylinder, cube, and prism specimens. The test results are curve fitted using least square method(LSM) to obtain the new parameters for the modified size effect law(MSEL). The analysis results show that the effect of specimen sizes and shapes on ultimate strength is apparent. The results also show stronger size effect in member when the casting direction is perpendicular to loading direction

  • PDF

산업용 심층여과 카트리지 필터 (Depth Cartridge Filter for Industrial Liquid Filtration)

  • 남상용;심홍섭;이영무;최영옥
    • 멤브레인
    • /
    • 제19권3호
    • /
    • pp.173-182
    • /
    • 2009
  • 심층형여과 카트리지필터는 반도체 등 전자재료, 식음료, 각종 안료, 페인트, 잉크 등의 공정용 카트리지 필터로서 널리 사용되고 있는 필터이다. 이러한 공정용 카트리지 필터의 여과특성과 심층형여과 카트리지 필터의 종류, 제조업체 및 전세계 시장동향을 살펴보고, 심층형여과 카트리지 필터의 고장사례현황 및 원인규명과 함께, 신뢰성평가 방법에 대하여 고찰하였다.

Development of HAUSAT-1 Picosatellite Communication Subsystem as a Test Bed for Small Satellite Technology

  • Moon, Byoung-Young;Kim, Young-Hyun;Chang, Young-Keun
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제5권1호
    • /
    • pp.6-18
    • /
    • 2004
  • This paper addresses the development and design of the HAUSAT-l (Hankuk Aviation University SA'Tellite-D communication subsystem, which is a next generation picosatellite, developed by SSRL (Space System Research Lab.) of Hankuk Aviation University. The communication subsystem generally consumes the majority of power and volume for picosatellites, and thus its design is critical to the overall satellite and mission plans. The HAUSAT-l designs are implemented by using the 145.84 MHz for uplink and 435.84 MHz for downlink frequency bands. The simulation and test results of the homemade radio and the TNC (Terminal Node Controller) integrated on the HAUSAT - I , a picosatellite scheduled to launch on September 2004 by Russian launch vehicle "Dnepr", are presented for EM, QM and FM, respectively.

의료영상 재구성의 속도개선에 관한 연구 (A Study on Speed Improvement of Medical Image Reconstruction)

  • 유종현;백승화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 G
    • /
    • pp.2489-2491
    • /
    • 1998
  • The study of 3D image reconstruction re has developed along the progress of computer. Therfore Great deal of research on it have been done. 3D medical image reconstruction techniques are useful to figure out human's complex 3D structures from the set of 2D section. But 3D medical image reconstruction require a lot of calculation, it takes long time and expensive system. That gives a reason to the improvement of study on speed. In this paper. applying the interpolation to only the part which can appear as cube, I come up with a method that calculates the speed by reducing the a mount of calculation.

  • PDF

가상현실을 이용한 도망치기 게임 개발 (A Development of Extreme Escape Game using Virtual Reality)

  • 강명환;이재근;이한글;김한;강민식
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 추계학술대회
    • /
    • pp.557-558
    • /
    • 2014
  • ICT 기술발전으로 웨어러블 디바이스(wearable device)와 증강현실(augmented reality: AR) 및 가상현실(virtual reality: VR)등은 차세대 게임 산업에 새로운 재미와 가치를 부여할 기술로 주목받고 있다. 특히 가상현실 기술은 컴퓨터 시뮬레이션으로 창출된 3차원 가상공간으로 사용자가 현실 세계에서는 직접 경험하지 못하는 상황을 간접 체험할 수 있어 실재감과 몰입감을 경험하게 한다. 게임에서의 몰입과 실재감은 게임이용과 만족도에 큰 영향을 미치는 것으로 연구되고 있다. 따라서 본 논문에서는 가상현실을 이용하여 유저와 상호작용하고, 사용자에게 현실과 유사한 긴장감을 줄 수 있는 극한 도망 게임을 개발하였다.

  • PDF

시공간 질의 클러스터링: 데이터 큐빙 기법 (Spatio-temporal Query Clustering: A Data Cubing Approach)

  • 심상예;백성하;배해영
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2009년도 추계학술발표대회
    • /
    • pp.287-288
    • /
    • 2009
  • Multi-query optimization (MQO) is a critical research issue in the real-time data stream management system (DSMS). We propose to address this problem in the ubiquitous GIS (u-GIS) environment, focusing on grouping 'similar' spatio-temporal queries incrementally into N clusters so that they can be processed virtually as N queries. By minimizing N, the overlaps in the data requirements of the raw queries can be avoided, which implies the reducing of the total disk I/O cost. In this paper, we define the spatio-temporal query clustering problem and give a data cubing approach (Q-cube), which is expected to be implemented in the cloud computing paradigm.