• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.159-165
• /
• 1999

The adsorption and separation behaviors of transition metal ions using a merrifield resin bound 1,12-diaza-3,4:9,10-dibenzo-5,8-dioxacyclopentadecane (NTOE) and 1,12,15-triaza-3,4:9,10-dibenzo-5,8-dioxacycloheptadecane(NDOE) were investigated in aqueous solution. The orders of adsorption degree(E) and distribution ratio(D) of transition metal ions were Cu(II)$t_R$) of metal ions were affected by adsorption degree(E) and distribution ratio(D). This results showed good separation efficiency of Ag(I) from mixed metal solution.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.9 no.2
• /
• pp.123-144
• /
• 2005

Objectives: Pulse-Respiration Ratio has been used for estimating subject's Han-Yeol [寒熱] status since it mentioned in suwen [素問]. In practicing Pulse-Respiration Ratio over 5 means the status of Yeol [熱], Pulse-Respiration Ratio below 3 means the status of Han [寒]. We performed this study to examine the Optimum Standard for Measuring Pulse-Respiration Ratio on the Basis of Repeatability and Reproducibility. Methods: After subject's 5 minutes rest we measured subject's ECG, respiration pattern, EEG, EMG simultaneously. In this research examiner's number is two, subject's number is four, and the number of repeat is two. We calculated Pulse-Respiration Ratio through dividing Respiration cycle average by Pulse cycle average according to each standard including time section, $EEG(relative-{\alpha}$ density, $relative-{\beta}$ density, ${\alpha}/{\beta}$ and EMG. We analyzed these data through Gage R&R study using MINITAB 13.20 program and considered the results of below 30 %R&R and over 4 Number of Distinct Categories to have a significance. Results: 1. In the applying of time standard, Pulse-Respiration Ratio from section 3, 4, 6, 8 had a significant meaning in the aspect of Repeatability and Reproducibility. 2. In the applying of $EEG({\alpha}$ I , ${\beta}$ I , ${\alpha}/{\beta})$, EMG(E I) standard, there was no significant results. 3. In the applying of time standard(section 5, 6, 7), $EEG({\alpha}$ I , ${\beta}$ I , ${\alpha}/{\beta})$ and EMG(E I) standard simultaneously, Pulse-Respiration Ratio from ${\alpha}/{\beta}$ in section 6, ${\beta}$ I in section 8 had a significant meaning in the aspect of Repeatability and Reproducibility. Conclusions: We can suggest the Optimum Standard for Measuring Pulse-Respiration Ratio on the basis of Repeatability and Reproducibility as followings; 1. Pulse-Respiration Ratio Measuring time should be at least 15 minutes. 2. Applying of time(section 6, 8) and $EEG({\beta}$ I, ${\alpha}/{\beta})$ standard simultaneously is recommended considering reliability and validity but more study is needed. 3. EMG(E I) may be helpful to detect the segment of physical rest and exclude artifacts but more study is needed.

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.221-234
• /
• 1996

Basic studies for the effective extraction of dibenzylammonium dibenzyldithiocarbamate(DBADBDC) complexes of Ag(I), Pd(II), Au(III) and Pt(IV) into chloroform have been conducted. The effects of pH on the extraction of ligand itself and metal cemplexes showed that DBADBDC itself was uniformly extracted in the pH range of 2~9 and metal complexes were effectively extracted at the pH range as follows. That is, Ag(I) : in an acidic aqua medium, Pd(II) : > 4, Au(III) : wide range, and Pt(IV) : > 3. The distribution ratio and extractabilities were obtained from the partition and extraction equilibria of metal-DBDC complexes between aqueous solution and chloroform. Ag(I) : log D=4.226 : E(%)=99.9% in the aqueous solution of pH 0, Pd(II) : log D=1.804 : E(%)=98.5% at pH 4~7, Au(III) : log D=3.755 : E(%)=99.9% at pH 2~10, and Pt(IV) : log D=0.165 : E(%)=57.2% at pH 8.0. And also mole ratio of metal ion to ligand in complexes were determined by mole ratio method : 1 : 1 for Ag(I) and 1 : 2 for Pd(II), Au(III) and Pt(IV). $Cl^-$ was included as a coordination species in complexes of Au(III) and Pt(IV). Besides, extraction mechanisms of compleses sere examined in the presence of chloride ion in an aquous solution, and extraction reactions and estraction constants could be proposed and calculated, respectively.

• Journal of Life Science
• /
• v.7 no.4
• /
• pp.347-354
• /
• 1997

Some attempts were made to investigate the gentic characteristics of the brown planthopper(BPH), Nilaparvata lugens Sta${\aa}$l, biotypes. In terms of egg and nymphal periods, egg hatcgability, emergence ratio, and population change of BPH and plant damage of rice cultivars by the infestation of BPH biotypes and their hybrid progenies in field conditions. The egg and nymphal periods of the three of BPH biotypes and their hybrid progenies on Dongjinbyeo with no resistance gene were shorter than on rice cultivars with resistance gene. But the periods of biotype-2(♀) X 2(♂) (E) on Samgangbyeo with Bph-1 gene and biotype-3(♀) X 3(♂)(I) on Mirying 63 with bph-2 gene were as short as on Dongjinbyeo. The egg hatchability and emergence ratio of the three Bph biotypes and their hybrid progenies on Dongjinbyeo were higher than on the other rice cultivars, and those of E on Samgangbyeo and I on Miryang 63 were as high as on Dongjinbyeo. In rice paddy field, biotype-1(♀) X 1(♂)(A)$\sim$I infested on Dongjinbyeo, E onSamgangbyeo, and I on Miryang 63 were increased their population densities remarkably in next generation. Dongjinbyeo infested by A$\sim$I, and Myryang 63 infested by I were hopperburned at 60 days after infestation and had a damage rating of 0.9. But Samgangbyeo infested by E was no hopperburn(damage rating: 7.3) though it showed high BPH population at 60 days after infestation.

• Korean Journal of Psychosomatic Medicine
• /
• v.5 no.1
• /
• pp.97-107
• /
• 1997

As a preliminary step to develop the Daily stress Inventory(DSI) for assessing minor stressors frequently experienced in everyday lift. We examined the reliability and validity of the DSI. The Daily Stress Inventory(DSI), the Beck Depression Inventory(BDI), the State-Trait Anxiety Inventory(STAI), the Social Readjustment Rating Scale(SRRS) and the Minnesota Multiphasic Personality Inventory(MMPI) were administered to 111 college students. Compared with the weekly DSI Event, Impact and I/E ratio scores of the American college students, the weekly event and I/E ratio scores of the Korean college students were significantly higher but weekly Impact score was lower. The internal consistency reliability of the DSI as computed by Cronbach alpha was .98. The DSI I/E ratio scores were significantly correlated with the scores of State Anxiety$({\gamma}=.27)$ and Trait Anxiety${\gamma}=.24)$, but not with BDI scores. And the SSRS scores were not significantly correlated to the DSI Event or Impact and In ratio scores. Significant correlations were revealed between the DSI Impact scores and the Sc and Ma scales of the MMPI. And the correlation between the DSI I/E ratio scores and the L, D, Hy, Pd and Pa scales of the MMPI was also significant. But no significant correlation was found between the DSI Event scores and all the scales of the MMPI. This study suggests that the DSI can be a reliable and valid tool to assess the minor stress frequently experienced in everyday life future study should be directed to obtain normative data based on more varied and larger population. Especially gathering additional evidences for the validity of the DSI using other minor stressor scale will be required.

• Earthquakes and Structures
• /
• v.12 no.1
• /
• pp.135-144
• /
• 2017

Near-fault ground motions are characterized by high values of the ratio between the peak of vertical and horizontal ground accelerations, which can significantly affect the nonlinear response of a base-isolated structure. To check the effectiveness of different base-isolation systems for retrofitting a r.c. framed structure located in a near-fault area, a numerical investigation is carried out analyzing the nonlinear dynamic response of the fixed-base and isolated structures. For this purpose, a six-storey r.c. framed building is supposed to be retrofitted by insertion of an isolation system at the base for attaining performance levels imposed by current Italian code in a high-risk seismic zone. In particular, elastomeric (e.g., high-damping-laminated-rubber bearings, HDLRBs) and friction (e.g., steel-PTFE sliding bearings, SBs, or friction pendulum bearings, FPBs) isolators are considered, with reference to three cases of base isolation: HDLRBs acting alone (i.e., EBI structures); in-parallel combination of HDLRBs and SBs (i.e., EFBI structures); FPBs acting alone (i.e., FPBI structures). Different values of the stiffness ratio, defined as the ratio between the vertical and horizontal stiffnesses of the HDLRBs, sliding ratio, defined as the global sliding force divided by the maximum sliding force of the SBs, and in-plan distribution of friction coefficient for the FPs are investigated. The EBI, EFBI and FPBI base-isolation systems are designed assuming the same values of the fundamental vibration period and equivalent viscous damping ratio. The nonlinear dynamic analysis is carried out with reference to near-fault earthquakes, selected and scaled on the design hypotheses adopted for the test structures.

• Structural Engineering and Mechanics
• /
• v.37 no.6
• /
• pp.633-648
• /
• 2011

This paper investigates the aspect-ratio locking of the isoparametric 8-node quadrilateral (QUAD8) element. An important finding is that, if finite element solution is carried out with in exact arithmetic (i.e., with no truncation and round off errors), the locking tendency of the element is completely avoided even for aspect-ratios as high as 100000. The current finite element codes mostly use floating point arithmetic. Thus, they can only avoid this locking for aspect-ratios up to 100 or 1000. A novel method is proposed in the paper to avoid aspect-ratio locking in floating point computations. In this method, the offending terms of the strain-displacement matrix (i.e., $\mathbf{B}$-matrix) are multiplied by suitable scaling factors to avoid ill-conditioning of stiffness matrix. Numerical examples are presented to demonstrate the efficacy of the method. The examples reveal that aspect-ratio locking is avoided even for aspect-ratios as high as 100000.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.163-164
• /
• 2002

This paper describes a new carbon film that afford superlubricity (i.e, friction coefficients of 0.001- 0.005) and superlow wear rates (i.e., $10^{-11}-10^{-10}mm^3/N.m$) to sliding metallic and ceramic surfaces, when tested in inert test environments. The wear life of these films are more than 1000 km even under very high contact pressures (i.e., 1-3 GPa) and at a wide range of sliding velocities (i.e., 0.1 to 2 m/s). They are produced in a plasma enhanced chemical vapor deposition system at room temperature using highly hydrogenated gas discharge plasmas. Extensive research has shown that films grown in highly hydrogenated gas discharge plasmas (i.e., hydrogen-to-carbon ratio of 6 and above) provide superlow friction and wear coefficients. In full paper, specific conditions under which superlubricity can be achieved in carbon films will be discussed.and a mechanistic model will be proposed to explain the superlubricity of new carbon films.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.1022-1030
• /
• 1998

Background : In volume-controlled ventilation, the use of inspiratory pause increases the inspiratory time and thus increases mean airway pressure and improves ventilation. But under the same I : E ratio, the effects of inspiratory pause on mean airway pressure and gas exchange are not certain. Moreover, the effects may be different according to the resistance of respiratory system. So we studied the effects of inspiratory pause on airway pressure and gas exchange under the same I : E ratio in volume-controlled ventilation. Methods: Airway pressure and arterial blood gases were evaluated in 12 patients under volume-controlled mechanical ventilation with and without inspiratory pause time 5%. The I : E ratio of 1 : 3, $FiO_2$, tidal volume, respiratory rate, and PEEP were kept constant. Results: $PaCO_2$ with inspiratory pause was lower than without inspiratory pause ($38.6{\pm}7.4$ mmHg vs. $41.0{\pm}7.7$ mmHg. p<0.01). P(A-a)$O_2$ was not different between ventilation with and without inspiratory pause $185.3{\pm}86.5$ mmHg vs. $184.9{\pm}84.9$ mmHg, p=0.766). Mean airway pressure with inspiratory pause was higher than without inspiratory pause ($9.7{\pm}4.0\;cmH_2O$ vs. $8.8{\pm}4.0\;cmH_2O$, p<0.01). The resistance of respiratory system inversely correlated with the pressure difference between plateau pressure with pause and peak inspiratory pressure without pause (r=-0.777, p<0.l), but positively correlated with the pressure difference between peak inspiratory pressure with pause and peak inspiratory pressure without pause (r=0.811, p<0.01). Thus the amount of increase in mean airway pressure with pause positively correlated with the resistance of respiratory system (r=0.681, p<0.05). However, the change of mean airway pressure did not correlated with the change of $PaCO_2$. Conclusion: In volume-controlled ventilation under the same I : E ratio of 1 : 3, inspiratory pause time of 5% increases mean airway pressure and improves ventilation. Although the higher resistance of respiratory system, the more increased mean airway pressure, the increase in mean airway pressure did not correlated with the change in $PaCO_2$.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.2E
• /
• pp.111-116
• /
• 2006

The purpose of this study is to investigate the relations between unbonded tendon stress and its influential parameters, i.e. bonded reinforcement ratio, span/depth ratio, and loading type. To this end, the influence of such parameters was examined with twenty eight test results of previous studies. Afterwards, an experimental study was carried out with twenty one test specimens. The investigation of previous and current experiments revealed the followings; (1) The bonded reinforcement ratio and prestressing ratio were proved to be important variables on the unbonded tendon stress. (2) The ratio of span to depth and the type of loading affected the unbonded tendon stress partially although their effects varied with bonded reinforcement ratio. (3) AASHTO LRFD Code and Moon/Lim's design equations predicted the experimental results well with the safety margin.