• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.2877-2882
• /
• 2013

Second-order rate constants ($k_{Ox^-}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl X-substituted-cinnamates (7a-7e) and Y-substituted-phenyl cinnamates (8a-8e) with butane-2,3-dione monoximate ($Ox^-$) in 80 mol % $H_2O$/20 mol % DMSO at $25.0{\pm}0.1^{\circ}C$. The Hammett plot for the reactions of 7a-7e consists of two intersecting straight lines while the Yukawa-Tsuno plot exhibits an excellent linearity with ${\rho}_X$=0.85 and r=0.58, indicating that the nonlinear Hammett plot is not due to a change in the rate-determining step but is caused by resonance stabilization of the ground state (GS) of the substrate possessing an electron-donating group (EDG). The Br${\o}$nsted-type plot for the reactions of Y-substituted-phenyl cinnamates (8a-8e) is linear with ${\beta}_{lg}$ = -0.64, which is typical of reactions reported previously to proceed through a concerted mechanism. The ${\alpha}$-nucleophile ($Ox^-$) is more reactive than the reference normal-nucleophile ($4-ClPhO^-$). The magnitude of the ${\alpha}$-effect (i.e., the $k_{Ox^-}/k_{4-ClPhO^-}$ ratio) is independent of the electronic nature of the substituent X in the nonleaving group but increases linearly as the substituent Y in the leaving group becomes a weaker electron-withdrawing group (EWG). It has been concluded that the difference in solvation energy between $Ox^-$ and $4-ClPhO^-$ (i.e., GS effect) is not solely responsible for the ${\alpha}$-effect but stabilization of transition state (TS) through a cyclic TS structure contributes also to the Y-dependent ${\alpha}$-effect trend (i.e., TS effect).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.4
• /
• pp.279-284
• /
• 1990

This experiment was conducted to study the effect of dietary vitamin E on the lipid composi-tion of rats treated with carbon tetrachloride. Rats were divided into five groups I. e. C(soybean oil with vitamin E(40mg/kg diet)) EF(CCl4 with vitamin E deficient diet) 40E(CCl4 with vitamin E(40mg/kg diet) 400E(CCl4 with vitamin E(400mg/kg diet) 800E(CCl4 with vitamin E(800mg/kg diet) Body weight gain and food efficient ratio were not observed significant differences. The liver weight was significantly increased in the CCl4 treated groups but the liver weight of 800E group was significantly lower than that of EF group. In EF and 40E groups kidney weights were significantly higher compared to that of C group. The content of total lipid in liver of 40E and 400E groups were significantly higher than that of control group but in 400E and 800E groups the contents were significantly lower compared with that of EF group. The content of triglyceride in liver was significantly higher in the CCl4 treated group and the content of cholesterol was significantly higher in the EF and 40E groups but those of 800E group were significantly lower compared with those of EF group. In CCl4 administration groups were significantly higher than those of control group and 400E and 800E groups were significantly lower than those of EF group.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.16-21
• /
• 2005

The effect of additive composition, using AlN and $Er_{2}O_{3}$ as sintering additives, on the mechanical properties of liquid-phase-sintered, and subsequently annealed SiC ceramics was investigated. The microstructures developed were quantitatively analyzed by image analysis. The average thickness of SiC grains increased with increasing the $Er_{2}O_{3}/(AlN + Er_{2}O_{3})$ ratio in the additives whereas the aspect ratio decreased with increasing the ratio. The mechanical properties versus $Er_{2}O_{3}/(AlN + Er_{2}O_{3})$ ratio curve had a maximum; i.e., there was a small composition range at which optimum mechanical properties were realized. The best results were obtained when the ratio ranged from 0.4 to 0.6. The flexural strength and fracture toughness of the SiC ceramics were $550\~650\;MPa$ and $5.5\~6.5$ MPa${\cdot}m^{1/2}$, respectively.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.29-30
• /
• 2012

The objectives of this study are to examine the variation of flame chemiluminescence on flame condition and to evaluate the possibility to apply the optical sensor for air/fuel ratio control. Flame chemiluminescence is one of the most important factor to judge the real time flame condition like a air/fuel ratio. In this paper, it is experimentally found that a strong relationship between the air/fuel ratio and optical element output (i.e., photo diode) should be existed. This is verified through the flame spectral analysis for various PD output signal.

• Animal Systematics, Evolution and Diversity
• /
• v.34 no.3
• /
• pp.127-142
• /
• 2018

A new species of Eudactylopus Scott A., 1909 is described from the southern coast of Korea. The specimens were collected using a light trap set overnight at the entrance near a pier. Eudactylopus yokjidoensis n. sp. is similar to E. andrewi Sewell, 1940 and E. spectabilis (Brian, 1923) in two key respects: similar length of proximal and distal inner setae on female P2 enp-2, and modification of two subapical setae on male P2 endopod. However, E. yokjidoensis can be differentiated from the two species by following morphological characteristics: in females, the length ratio of cephalothorax/2nd-4th thoracic somites combined is smaller in E. yokjidoensis than other two species (1 : 0.8 vs. 1 : 1); antennule has nine segments (vs. 7-segmented in E. andrewi); P2 to P4 each bears a process in medial distal margin of basis, while it is just smooth in E. spectabilis; in males; the length ratio of cephalothorax to 2nd-4th thoracic somites combined is smaller in E. yokjidoensis than other two species (1 : 0.6 vs. 1 : 1 in E. andrewi and 1 : 0.8 in E. spectabilis); and P5 exopod has a comb-like innermost seta, while it is bipinnate seta in E. spectabilis. To prove the Korean species of Eudactylopus to be new, full descriptions of both sexes are given here, and the claim is supported by distinct genetic differences between E. yokjidoensis and E. spectabilis (22.3-22.7%) in the mitochondrial gene cytochrome oxidase subunit I(mtCOI) sequence.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.107-112
• /
• 2004

The combining abilities in the 5 newly evolved thermo tolerant breeds viz., SR6, SR7, SR8 SR9 and SR10 of silkworm Bombyx mori L. and their 15 hybrids were made in a line${\times}$tester crossing programme. Data were analysed for seven quantitative traits i.e., pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, filament length and raw silk percentage under optimum room temperature $(25{\pm}{1^{\circ}C})$ conditions (In case of high temperature $(36{\pm}{1^{\circ}C})$ stress conditions five economic traits except filament length and raw silk percentage) with 3 widely adapted testers i.e., KA, CSR2 and CC1 as lines (females) and testers (males) respectively. The performance at high temperature and low humidity conditions aye only taken into consideration for selecting the best lines/hybrids. Among the lines SR6 exhibited positive General combining ability (GCA) effects for pupation rate, cocoon yield, cocoon weight and cocoon shell ratio traits, followed by SR7 for pupation rate, cocoon yield and cocoon shell weight and cocoon shell ratio. Among testers, KA exhibited positive GCA effects for two quantitative traits cocoon yield, cocoon weight and CSR2 for cocoon shell weight and cocoon shell ratio under adverse temperature conditions. The hybrid SR6${\times}$CC1 and SR7${\times}$CSR2 exhibited significant positive Specific combining ability (SCA) effects for majority of the traits in high temperature stress conditions of rearing. The better parent value of heterosis(Heterobeltiosis) was exhibited by the hybrid SR6${\times}$CC1 for pupation rate, cocoon yield, cocoon weight and cocoon shell weight and SR7${\times}$CSR2 for all the trails evaluated under high temperature conditions. Based on the results, the lines SR6 and SR7 was judged as best combiners and the hybrids SR6${\times}$CC1 and SR7${\times}$CSR2 can be selected for commercial exploitation in tropical climate.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.53-58
• /
• 2022

Shape changes of hard mask play a key role in the aspect ratio dependent etch (ARDE). For etch process using high density and energy ions, deformation of hard mask shape becomes more severe, and high aspect ratio (HAR) etch profile is distorted. In this study, polygonal geometric model for shape-deformation of amorphous carbon layered hard mask is suggested to control etch profile during the process. Mask shape is modeled with polygonal geometry consisting of trapezoids and rectangles, and it provides dynamic information about angles of facets and etched width and height of remained mask shape, providing important features for real-time HAR etch profiling.

• Steel and Composite Structures
• /
• v.45 no.1
• /
• pp.23-38
• /
• 2022

This paper presents experimental and analytical studies of eccentrically loaded concrete-filled double steel (CFDST) and concrete-filled double skin tube (DCFST) columns having outer stainless steel tube. Eighteen CFDST and DCFST column specimens were manufactured and tested to examine the strength and load-deflection responses. In the study, the main parameters were concrete strength, load eccentricity, cross section and slenderness. The strengths, load-deflection diagrams and failure patterns of the columns were observed. In addition, the tested CFDST and DCFST columns were analyzed to attain the capacity and load versus lateral deflection responses. The obtained theoretical results were compared with the test results. A parametric study was also performed to research the effects of the ratio of eccentricity (e/H_o) slenderness ratio (L/r), H_o/t_o ratio, H_i/t_i ratio and the concrete compressive strength on the behavior of columns. In this work, the obtained results indicated that the ductility and capacity of columns were affected by cross section, concrete strength, steel strength, loading eccentricity and slenderness.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.3
• /
• pp.466-469
• /
• 2004

The recombinant bioluminescent Escherichia coli strains, DPD2511 and TV 1061 containing the katG and grpE promoters, respectively, from Vibrio fischeri fused to luxCDABE, were used to detect the adaptive and repair responses to oxidative damage caused by hydrogen peroxide $(H_2O_2)$, and protein damage due to phenol. The response ratio, represented as the bioluminescence induced in subsequent inductions of DPD2511 and TV1061 with the mother cells previously induced by each chemical, i.e., $H_2O_2$ and phenol during the previous induction stage, decreased suddenly compared with the ratio of the control culture of each strain, meaning there is a possible adaptive response to stress caused by chemicals. Protein damage due to phenol was completely repaired by the second culturing after the initial induction, as was oxidative damage caused by $H_2O_2$ which was also rapidly repaired, as detected by the recovery of bioluminescence level. This result suggests that E. coli promptly adapt and repair oxidative and protein damage by $H_2O_2$ and phenol completely.

• Geomechanics and Engineering
• /
• v.4 no.4
• /
• pp.229-241
• /
• 2012

In this paper, utilizing void ratio-effective stress and void ratio-permeability relationships, a system of two nonlinear partial differential equations is derived to predict the consolidation characteristics of normally consolidated (NC) and overconsolidated (OC) soft clays subjected to cyclic loading. A developed feature of the coefficient of consolidation containing two key parameters is emerged from the differential equations. Effect of these parameters on the consolidation characteristics of soft clays is analytically discussed. It is shown that the ratios between the slopes of e-$log{\sigma}^{\prime}$ and e-log k lines in the NC and OC states play a major role in the consolidation process. In the companion paper, the critical assumptions made in the analytical discussion are experimentally verified and a numerical study is carried out in order to examine the proposed theory.