• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.973-978
• /
• 2017

Objective: The aim of this study was to investigate the effects of simultaneous supplementation of laying hens with alpha-linolenic acid (ALA) resources (flax, perilla, and Eucommia ulmoides [E. ulmoides] seeds) and eicosapentaenoic acid/docosahexaenoic acid (EPA/DHA) resources (Schizochytrium sp.) on egg quality and n-3 polyunsaturated fatty acids (PUFA) profile. Methods: Dietary treatments were as follows: i) diet C (control diet); ii) diet F (diet C+10% flaxseeds); iii) diet P, (diet C+10% perilla seeds); iv) diet E (diet C+10% E. ulmoides seeds); v) diet A (diet C+1.5% microalage); vi) diet AF (diet C+10% flaxseeds+1.5% microalage); vii) diet AP (diet C+10% perilla seeds+1.5% microalgae); viii) diet AE (diet C+10% E. ulmoides seeds+ 1.5% microalage). Results: Egg weight, yolk weight and production ratio were not significantly affected by either algae or in combination with seeds (p>0.05). No significant difference was observed in ALA and DHA concentration in eggs between flaxseed, perila, and E. ulmodies seeds supplementation alone (p>0.05). N-3 PUFA in eggs was slightly improved by microalgae supplementation. The best supplementation, a combination of microalgae and perilla seeds, elevated (p<0.05) ALA from 19.7 to 202.5 mg/egg and EPA+DHA from 27.5 to 159.7 mg/egg. Highest n-3 PUFA enrichment (379.6 mg/yolk) was observed with supplementation of a combination of perilla seed and microalgae (362.2 mg/yolk), followed by a combination of flaxseed and microalgae (348.4 mg/yolk). The ALA, EPA, and DHA content obtained with a combination of microalgae and seeds surpassed the total sum of that obtained with microalgae or ALA-seeds alone. Conclusion: It is feasible to enrich eggs with n-3 PUFAs by perilla or E. ulmodies seeds instead of flaxseeds. Simultaneous supplementation of microalgae and seeds helped improve the transfer from EPA and docosapentaenoic acid into DHA.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.5
• /
• pp.435-441
• /
• 2011

The life cycle assessment on greenhouse gas emission of reinforced concrete buildings shows that more than 70 percent of greenhouse gas that is discharged by a building is discharged in the building maintenance stage, including cooling and heating. To reduce the greenhouse gas emission, maintenance planning to minimize the energy consumption is necessary in the design stage. In this paper, two heat storage rooms are tested to save the air cooling energy of the buildings. The specimens are essentially identical, except that chamber A contained paraffin sheets as the finishing material, while the other, chamber B, served as a control. The test results show that chamber A with the paraffin sheets exhibited less temperature change than chamber B without the sheets when temperature was increased outside of the specimens. The heating energy was probably consumed in the phase change of the paraffin sheets, which can be useful for reducing energy consumption related to air cooling during the summer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.10
• /
• pp.1540-1547
• /
• 2019

Objective: This study was conducted to evaluate the effects of tannins and cellulase on growth performance, nutrient digestibility, blood profiles, intestinal morphology, and carcass characteristics in Hu sheep. Methods: A total of 48 three-month-old meat Hu sheep ($25.05{\pm}0.9kg$) were blocked based on body weight, and randomly allotted to 4 treatments with 3 replicates of 4 sheep each. The experiment lasted for 80 d, and dietary treatments were as follows: i) CON, control diet; ii) TAN, CON+0.1% tannins; iii) CEL, CON+0.1% cellulase; iv) TAN+CEL, CON+0.1% tannins and 0.1% cellulase. Results: Compared with CON, CEL, and TAN+CEL had greater (p<0.05) final body weight (FBW) and average daily gain but lower (p<0.05) feed conversion ratio, while FBW of TAN+CEL was lower (p<0.05) than that of CEL. The apparent total tract digestibility (ATTD) of dry matter in TAN, CEL, and TAN+CEL groups were higher (p<0.05) than that in CON. CEL and TAN+CEL groups had greater (p<0.05) ATTD of crude fiber compared with TAN and CON, while TAN group had lower (p<0.05) ATTD of crude protein than other treatments. TAN, CEL, and TAN+CEL groups increased (p<0.05) serum globulin and alkaline phosphatase but decreased (p<0.05) albumin/globulin. Serum total protein was greatest for TAN+CEL, intermediate for TAN and CEL and least for CON (p<0.05). TAN+CEL group increased (p<0.05) dressing percentage compared with CON, while the backfat thickness of CEL was lower (p<0.05) than that of CON. The villus height of jejunum and ileum in CEL and TAN+CEL groups were greater (p<0.05) than that in CON, and the crypt depth and villus height: crypt depth of jejunum were increased (p<0.05) in TAN, CEL, and TAN+CEL groups. Conclusion: The addition of tannins and cellulase together promoted nutrient digestion, liver protein synthesis and intestinal development and thus improved growth performance and carcass characteristics.

• Journal of Nutrition and Health
• /
• v.29 no.8
• /
• pp.889-898
• /
• 1996

This study estimated the re!ation between psychological stress and stress hormones, nu­t tritional status of patients with non-insulin dependent diabetes mellitus(NIDDM). Psycho­l logical stress such as depr'ession and anxiety in 34 diabetics was analyzedin relation to nutrient intake, blood components such as fasting blood sugar(FBS), hemoglobin AIC, stress hormones a and amino acids. The IeveIs of depression and anxiety were measured by The center for ep­i idemiological studies-depc$pm$111.49pg/ml for total catecholamine ( (norepmephrine and epinephrine) and 233.95 $pm$73.99pg/ml for norepinephrine, 94.03$pm$75. 9 97pg/ml for epinephrine, 13.lS$pm$5.55pl/dl for cortisol and 171.50$pm$62.50pg/ml for gul c cagon respectlveIy. The leveIs of stress hormones in diabetics such as total catecholamine, norep­i mephrine cortisol and glucagon were significantly higher than those in normal control. The lev­el of epmephrine was higher in diabetics but the diffierenee was not significant. The calorie m t take in diabetics was 1762$pm$292keal which is S1.4% lower than Korean recommended dietary a allowances(RDA). Calcium intake was slightly low but other nutrients intakeswere higher than R RDA. The value of fasting blood sugar(FBS), usual fasting blood sugar(usual FBS) which refteet a average FBS during 3 months and hemoglobin Al C in diabetics was 1S4.1S$pm$74.22mg/dl, 177.76$pm$42.77mg/dl and S.S4$pm$2.S2% respec디VeIy. The distribution of plasma amino acids in d diabetics was generally in the normal range. The leveI of anxiety in diabetics was positively cor­related with norepinephrine, concentration and usual FBS. The levels of glucagon, usual FBS a and hemoglobin Aj C were pOSI디veIy correlated with the branched chaimamino acid(BCM : leucme, isoleucme and valine)

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• Journal of Korean Society on Water Environment
• /
• v.22 no.6
• /
• pp.1101-1106
• /
• 2006

Many BNR (Biological Nutrient Removal) plants have experienced a bulking problem, mainly due to the growth of filamentous organisms, particularly during the winter months. This study investigated the problem of bulking due to the growth of M. parvicella both at a full-scale municipal wastewater treatment plant and a pilot scale plant located in the C city. The full-scale facility was operated at a flow rate of $51,000m^3/d$, an F/M (Food-to-Microorganism) ratio of 0.12 kgBOD/kgMLVSS/d and an SRT (Solids Retention Time) higher than 25 days, respectively. This plant experienced bulking and foaming problems at low temperatures below $15^{\circ}C$ since it was retrofitted with the BNR system in 2003. The pilot plant employed had an identical process configuration as the full scale one and used the same wastewater source. It was operated at a flow rate of $3.8m^3/d$, temperatures between 10 to $25^{\circ}C$ and SRTs between 10 and 25 days. At full scale, the M. parvicella growth and SVI (Sludge Volume Index) patterns were studied in conjunction with temperature variations. At pilot scale, DO and SRT variations were also explored, in addition to the filamentous bacteria growth and SVI patterns. During the full-scale investigation, over a 3 year period, it was noted that the SVI was maintained within acceptable operational values (i.e. under 160) during the summer months. Moreover settling in the secondary clarifiers was good and was not affected by the presence of M. parvicella. In contrast, at low mean temperatures during winter, the SVI increased to over 300. Overall, as the temperature decreased, the predominance of M. parvicella became apparent. According to this study, M. parvicella growth could be controlled and SVI could drop under 160 by a change in operational conditions which involved an increase in DO concentration between 2 and 4 mg/L and a decrease in SRT to less than 20 days.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.504-511
• /
• 2001

Preventive resin restoration, extended concept of occlusal pit and fissure sealing, is procedure composed of as follows. Cavity preparation is limited to areas of initial caries The cavity is then restored with composite resin, while other sound pits and fissures are sealed with pit and fissure sealant. If pit and assure sealant with which microrestoration is possible is used, it may be of great benefit to both patient and operator in case of difficult-to-control children s treatment. However study on preventive resin restoration using this kind of materials have been scarce. The purpose of this study was to compare the microleakage of four different modes of preventive resin restoration. Restoration using only composite resin was compared together Fifty-five bicuspids were prepared with small class I cavity preparation on the occlusal surface, divided into the following groups and restored accordingly. Group 1 : Cavity was restored with Z-100 composite resin Group 2 : Cavity was restored with Z-100 composite resin. Pits and fissures were then sealed with Teethmate F-1 Group 3 : Cavity was restored with Z-100 composite resin Pits and fissures were then sealed with Ultraseal XT-plus Group 4 : Cavity and pits and fissures were restored with Ultraseal XT-plus altogrether Group 5 : Cavity was restored with Ultraseal XT-plus. Pits and fissures were then sealed with the same material. After restoration, the samples were thermocycled 500 times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 30 seconds. After thermocycling, the samples were dipped into 1% methylene blue solution for 24 hours, then rinsed with tap water. The teeth were then embedded in resin and cut buccolingually along the tooth axis and observed with a stereomicroscope to determine the degree of microleakage. The results were as follows : 1. Group 4 showed the greatest microleakage, while group 3, showed the least. The mean microleakage decreased in the following order:4>1>5>2>3. 2. There was no stastically significant difference between group 1 and group 5(p>0.05). However, group 1 showed significantly greater microleakage compared to group 2 and 3(p<0.05) Group 1 showed significantly less microleakage compared to group 4(p<0.05). 3. Group 2 showed no statistically significant difference compared to group 3(p>0.05). However group 2 showed significantly less microleakage compared to group 4 and 5(p<0.05) 4. Group 3 showed significantly less microleakage compared to group 4 and 5(p<0.05). 5. Group 5 showed significantly less microleakage than group 4(p<0.05).

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.537-546
• /
• 2005

An experiment was conducted to determine the effect of supplementation of chlortetracycline (CTC,110ppm), copper sulfate(Cu, 125ppm) and two levels of probiotics(Prob I, 0.04%, Prob II, 0.1%), Bacillus licheniformis and Bacillus subtilis) on growth performance, nutrient digestibility and manure characteristics in growing pigs. A total of 50 pigs that averaged 20.78$\pm$0.35kg BW and 50$\pm$2.3d age were allocated in a randomized block design with two pigs per pen and 5 pens per treatment. Pigs and feeders were weighed 10-days interval for the 40-d trials to determine ADG, ADFI and feed:gain ratio(F:G). Average daily gain, feed intake, feed/gain and nutrient digestibility were not improved(P>0.10) by the supplementation of CTC, Cu and two levels of probiotics. There were significant(P<0.05) Cu effects on digestibility of crude protein, and probiotics effects on digestibilities on organic matter, crude protein and energy between first 20 days and subsequent 20 days. Fecal concentrations of copper were highly increased(P<0.001) by the copper supplementation. Total bacteria and coliform counts were not altered by the supplementation of CTC, Cu and two levels of probiotics. Ammonia emission from slurry, measured during first 3 weeks, was reduced (P<0.001) in pigs fed diet with 125 ppm copper from copper sulfate. Results indicate that CTC, Cu and Probiotics supplementation had a little or not positive effect on grower pig performance under sound environmental conditions. Further studies may be warranted to investigate the effects of dietary copper-either reduced or in combination with dietary ammonia control agents-on the ammonia emission characteristics of swine manure.

• Sleep Medicine and Psychophysiology
• /
• v.19 no.2
• /
• pp.84-88
• /
• 2012

Introduction: The objective of the present study was to investigate the independent effects of major depressive disorder (MDD) and insomnia on somatization, respectively. Methods: A total of 181 participants (73 males and 108 females ; mean age $41.59{\pm}8.92$) without serious medical problem were recruited from a community and a psychiatric clinic in Republic of Korea. Subjects were divided into 4 groups based on the Structured Clinical Interview for DSM-IV axis I disorder (SCID-IV) and sleep questionnaire : 1) normal controls (n=127), 2) primary insomnia (n=11), 3) MDD without insomnia (n=14), and 4) MDD with insomnia (n=29). All participants were requested to complete the somatization subscores of the Symptom Checklist-90-Revised (SCL-90-R). Results: There were significant between-group differences in somatization score (F=25.30, p<0.001). Subjects with both MDD and insomnia showed higher somatization score compared to normal control (p<0.001), subjects with primary insomnia (p=0.01), or MDD subjects without insomnia (p<0.001). Subjects with primary insomnia had higher somatization score than normal controls (p<0.01), while there was no significant difference between MDD subjects without insomnia and normal controls. In multiple regression, presence of insomnia predicted higher somatization score (beta=0.44, p<0.001), while there was only non-significant association between MDD and somatization (beta=0.14, p=0.08). Conclusion: In the current study, insomnia was associated with somatization independently from major depression. Subjects with primary insomnia showed higher somatization. Within MDD patients, presence of insomnia was related to higher somatization. Our finding suggests that insomnia may partly mediate the relationship between depression and somatization.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.5
• /
• pp.766-772
• /
• 2000

Background : Pressure rise time (PRT) is the time in which the ventilator aclieves the set airway pressure in pressure-targeted modes, such as pressure control ventilation (PCV). With varying PRT, in principle, the peak inspiratory flow rate of the ventilator also varies. And if PRT is set to a shorter duration, the effective duration of target pressure level would be prolonged, which in turn would increase inspiratory tidal volume(Vti) and mean airway pressure (Pmean). We also postulated that the increase in Vti with shortening of PRT may relate inversely to the patients' basal airway resistance. Methods : In 13 paralyzed patients on PCV (pressure control 18$\pm$9.5 cm $H_2O$ $FIO_2\;0.6\pm0.3$, PEEP 5$\pm$3 cm $H_2O$, f 20/min, I : E1 : 2) with Servo 300 (Siemens-Elema, Solna, Sweden) from various causes of respiratory failure, PRT of 10 %, 5 % and 0 % were randomly applied. At 30 min of each PRT trial, peak inspiratory flow (PIF, L/sec), Vti (ml), Pmean (cm $H_2O$) and ABGA were determined. Results : At PRT 10%, 5%, and 0%, PIF were 0.69$\pm$0.13, 0.77$\pm$0.19, 0.83$\pm$0.22, respectively (p<0.001). Vti were 425$\pm$94, 439$\pm$101, 456$\pm$106, respectively (p<0.001), and Pmean were 11.2$\pm$3.7, 12.0$\pm$3.7, 12.5$\pm$3.8, respectively (p<0.001). pH were 7.40$\pm$0.08, 7.40$\pm$0.92, 7.41$\pm$0.96, respectively (p=0.00) ; $PaCO_2$ (mm Hg) were 47.4$\pm$15.8, 47.2 $\pm$15.7, 44.6$\pm$16.2, respectively (p=0.004) ; $PAO_2-PaO_2$ (mm Hg) were 220$\pm$98, 224$\pm$95, 227$\pm$94, respectively (p=0.004) ; and $V_n/V_T$ as determined by ($PaCO_2-P_E-CO_2$)/$PaCO_2$ were 0.67$\pm$0.07, 0.67$\pm$0.08, 0.66$\pm$0.08, respectively (p=0.007). The correlation between airway resistance and change of Vti from PRT 10% to 0% were r= -0.243 (p=0.498). Conclusion : Shortening of pressure rise timee during PCV was associated with increased tidal volume, increased mean airway pressure and lower $PaCO_2$.