• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.344-348
• /
• 2002

As microelectronics technology continues to progress, there is also a continuous demand on highly integration and miniaturization of systems. For example, it is desirable to package several integrated circuits together in multilayer structure, such as multichip modules, to achieve higher levels of compactness and higher performance. Passive components (i.e., capacitors, resistors, and inductors) are very important fort many MCM applications. In addition, the low-temperature co-fired ceramic (LTCC) process has considerable potential for embedding passive components in a small area at a low cost. In this paper, we investigate a method of statistically modeling integrated passive devices from just a small number of test structures. A set of LTCC inductors is fabricated and their scattering parameters (s-parameters) are measured for a range of frequencies from 50MHz to 5GHz. An accurate model for each test structure is obtained by using a building block based modeling methodology and circuit parameter optimization using the HSPICE circuit simulator.

• Bulletin of the Korean Chemical Society
• /
• 제19권5호
• /
• pp.501-503
• /
• 1998

In this work, we applied the 1D $11^B$ nutation NMR method for the analysis of the local structural environments in powdered borosilicates $(SiO_2-B_2O_3)$. Spin dynamics during a rf irradiation for spin I=3/2 was analytically calculated with a density ma trix formalism. Spectral simulation programs were written in MATLAB on a PC. Two borosilicates prepared by the sol-gel process at different stabilization temperature were used for the 1D $11^B$ nutation NMR experiment. The $11^B$ NMR parameters, quadrupole coupling constants $(e^2qQ/h)$ and asymmetry parameters (η), for each borosilicate were extracted from the nonlinear least-squares fitting. The effects of heat treatments on the local structures of boron sites in borosilicates were discussed.

• Bulletin of the Korean Chemical Society
• /
• 제19권5호
• /
• pp.519-524
• /
• 1998

In this work, we applied the 1D 11B nutation NMR method for the analysis of the local structural environments in powdered borosilicates (SiO2-B2O3). Spin dynamics during a rf irradiation for spin I=3/2 was analytically calculated with a density matrix formalism. Spectral simulation programs were written in MATLAB on a PC. Two borosilicates prepared by the sol-gel process at different stabilization temperature were used for the 1D 11B nutation NMR experiment. The 11B NMR parameters, quadrupole coupling constants (e2qQ/h) and asymmetry parameters (η), for each borosilicate were extracted from the nonlinear least-squares fitting. The effects of heat treatments on the local structures of boron sites in borosilicates were discussed.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.347-355
• /
• 2015

The growth kinetics of phototrophic microorganisms can be controlled by the light irradiance, the concentration of an inorganic nutrient, or both. A multi-component kinetic model is proposed and tested in novel batch experiments that allow the kinetic parameters for each factor to be estimated independently. For the cyanobacterium Synechocystis sp. PCC6803, the estimated parameters are maximum specific growth rate $({\mu}_{max})=2.8/d$, half-maximum-rate light irradiance $(K_L)=11W/m^2$, half-inhibition-rate light irradiance $(K_{L,I})=39W/m^2$, and half-maximum-rate concentration for inorganic carbon $(K_{S,Ci})=0.5mgC/L$, half-maximum-rate concentration for inorganic nitrogen $(K_{S,Ni})=1.4mgN/L$, and half-maximum-rate concentration for inorganic phosphorus $(K_{S,Pi})=0.06mgP/L$. Compared to other phototrophs having ${\mu}max$ estimates, PCC6803 is a fast-growing r-strategist relying on reaction rate. Its half-maximum-rate and half-inhibition rate values identify the ranges of light irradiance and nutrient concentrations that PCC6803 needs to achieve a high specific growth rate to be a sustainable bioenergy source. To gain the advantages of its high maximum specific growth rate, PCC6803 needs to have moderate light illumination ($7-62W/m^2$ for ${\mu}_{syn}{\geq}1/d$) and relatively high nutrient concentrations: $N_i{\geq}2.3 mgN/L$, $P_i{\geq}0.1mgP/L$, and $C_i{\geq}1.0mgC/L$.

• 호남수학학술지
• /
• 제39권4호
• /
• pp.503-514
• /
• 2017

For real parameters ${\alpha}$ and ${\beta}$ such that ${\alpha}$ < 1 < ${\beta}$, we denote by $\mathcal{P}({\alpha},{\beta})$ the class of analytic functions p, which satisfy p(0) = 1 and ${\alpha}$ < ${\Re}\{p(z)\}$ < ${\beta}$ in ${\mathbb{D}}$, where ${\mathbb{D}}$ denotes the open unit disk. Let ${\mathcal{A}}$ be the class of analytic functions in ${\mathbb{D}}$ such that f(0) = 0 = f'(0) - 1. For $f{\in}{\mathcal{A}}$, ${\mu}{\in}{\mathbb{C}}{\backslash}\{0\}$ and ${\nu}{\in}{\mathbb{C}}$, let $I_{{\mu},{\nu}:{\mathcal{A}}{\rightarrow}{\mathcal{A}}$ be an integral operator defined by $$I_{{\mu},{\nu}[f](z)}=\({\frac{{\mu}+{\nu}}{z^{\nu}}}{\int}^z_0f^{\mu}(t)t^{{\nu}-1}dt\)^{1/{\mu}}$$. In this paper, we find some sufficient conditions on functions to be in the class $\mathcal{P}({\alpha},{\beta})$. One of these results is applied to the integral operator $I_{{\mu},{\nu}}$ of two classes of starlike functions which are related to the class $\mathcal{P}({\alpha},{\beta})$.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.36-46
• /
• 2000

The performance improvement and emission reduction in a turbocharged D.I. diesel engine was studied experimentally in this paper. The system of intake port, fuel injection and turbochager are very important factors which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. Through these experiments it can be expected to meet performance and emission by optimizing the main parameters; the swirl ratio of intake port, fuel injection system and turbocharger. The swirl ratio of intake port was modified by hand-working and measured by impulse swirl meter. Through this steady flow test, we knew that the increase of swirl ratio is decreasing the mean flow coefficient, whereas the gulf factor is increasing. And the optimum results of engine performance and emission are as follows; the swirl ratio is 2.43, injection timing is BTDC 13。 CA, compression ratio is 16, combustion bowl is re-entrant 5$^{\circ}$, nozzle hole diameter is $\Phi$0.28＊6, turbocharger is GT40 model which are compressor A/R 0.58 AND turbine A/R 1.19.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제11권1호
• /
• pp.75-78
• /
• 2005

Inheritance of cocoon and shell weight characters in silkworm crosses between sex-limited at larva stage lines, including three (NIG$_{1}$ $\times$ TV$_{3/2}$ ,NIG$_{1}$ $\times$ TBV$_{2/24}$ and NIG$_{1}$ $\times$ B$_{2/6}$ ) from Japanese type and three (NIG$_{2}$ $\times$ B$_{2/6}$ ,TV$_{3/2}$ $\times$ NIG$_{1}$ and NIG$_{2}$ $\times$ TBV$_{2/24}$ ) from Chinese type was studied at Regional Centre for Scientific­Applied Service - Vratza during the period of 2000 ­2002. Inheritance of tested characters in F I was deter­mined through genetic parameters, additiveness (a), dominance (d) and their ratio (d/a). Degree and frequency of transgressions in F$_{2}$ were calculated also. Over dominance (d/a(>) 1) with bigger contribution of the parent with higher value was determined at inheritance tested characters. Transgressions obtained at cocoon and shell weight characters were positive and varied in wide limits. The productivity of parent's lines had defined the variability of genetic parameters for degree and frequency of transgressions. Combination of positive transgressions at cocoon and shell weight characters in F2 hybrid populations from sex-limited at larva stage allow us to select individuals with high productive potential for further use in selection programs.

• Journal of electromagnetic engineering and science
• /
• 제7권2호
• /
• pp.83-90
• /
• 2007

In this paper, the formulation of the protection ratio based upon a composite fade margin and availability is newly presented for the detailed planning of frequency coordination in the microwave relay system network, and computed results for co-channel and adjacent channel protection ratios are illustrated over an actual system with 6.2 GHz. It is shown that the protection ratio to assure a quality of service can be expressed in terms of the composite fade margin, noise-to-interference ratio, net filter discrimination, and system parameters. In addition, the net filter discrimination, depending upon the transmitter spectrum mask and the overall receiver filter characteristic, has been examined to investigate the effect of the adjacent channel protection ratio caused by the adjacent channel interference. Regarding simulated results for 6.2 GHz, 60 km, 64-QAM, and N/I=6 dB at the bit error rate of $10^{-6}$, composite fade margin and co-channel protection ratio yield 25.14 and 50.3 dB, respectively. Also, the net filter discrimination of 26.5 dB and the adjacent channel protection ratio of 23.8 dB are obtained at the first adjacent channel of 30 MHz. The proposed method provides some merits in view of a comprehensive and practical application with more detailed and various system parameters needed to access the criteria for making the proper frequency coordination.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.164-171
• /
• 2019

The protonation parameters, dissociation constants ($pK_{BH^+}$) of conjugate acid, slope values (m, ${\phi}$ and $m^*$) and correlation coefficients (r) of hydroxamic acids were determined by Hammett acidity function method, Bunnett-Olsen method and excess acidity method in hydrochloric and perchloric acid solutions. Effect of acid concentration on partition and percentage protonation was also studied. $pK_{BH^+}$ values show that hydroxamic acids do not behave as Hammett bases, but hydroxamic acids behave as weak bases in strong acidic solutions. The values of $pK_{BH^+}$ obtained through Bunnett-Olsen method and excess acidity method were compared with the Hammett acidity function. ChemAxon's MarvinSketch 6.1.5 software was also used for determining $pK_a$, pI and microspecies distribution (%) of hydroxamic acids with pH. Hydrogen donor and acceptor values and logD were also obtained. The results show that N-p-chlorophenyl-4-bromobenzohydroxamic acid has the highest $pK_a$ and lowest logD values. On the contrary, N-phenyl-3,5-dinitrobenzohydroxamic acid has lowest the $pK_a$ and highest logD values.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1704-1710
• /
• 2010

The structure of a 2D grid-like copper(II) complex [Cu$(NCO)_2$(pyz)](pyz=pyrazine) (1) consists of 1D chains of Cu-pyz units connected by double end-on (EO) cyanato bridges. Each Cu(II) ion has a distorted octahedral coordination, completed by the four EO cyanato and two pyrazine ligands. Magnetic interactions through EO cyanato and pyrazine bridges in 1 are discussed on the basis of DFT broken-symmetry calculations at the B3LYP level. For model dicopper(II) complexes I (bridged by cyanato) and II (bridged by pyrazine), electronic structure calculations reproduce very well the experimental couplings for the S = 1/2 ferromagnetic and antiferromagnetic exchange-coupled 2D system: the calculated exchange parameters J are +1.25 $cm^{-1}$ and -3.07 $cm^{-1}$ for I and II, respectively. The $\sigma$ orbital interactions between the Cu $x^2-y^2$ magnetic orbitals and the nitrogen lone-pair orbitals of pyrazine are analyzed from the viewpoint of through-bond interaction. The energy splitting of 0.106 eV between two SOMOs indicates that the superexchange interaction should be antiferromagnetic in II. On the other hand, there are no bridging orbitals that efficiently connect the two copper(II) magnetic orbitals in I because the HOMOs of the basal-apical NCO bridge do not play a role in the formation of overlap interaction pathway. The energy separation in the pair of SOMOs of I is calculated to be very small (0.054 eV). This result is consistent with the occurrence of weakly ferromagnetic properties in I.