• 터널과지하공간
• /
• 제12권4호
• /
• pp.268-276
• /
• 2002

In this study, a 3D coordinate measurement system equipped with a laser displacement meter for digitizing rock joint surface was established and the digitized data were used to calculate several roughness parameters. The parameters used in this study were micro avenge inclination $angle(i_{ave})$, average slope of joint $asperity(SL_{ ave})$, root mean square of $i-angle(i_{rms})$, standard deviation of height(SDH), standard deviation of $i-angle(SD_i)$, roughness profile $index(R_P)$, and fractal dimension(D). The relationships between the roughness parameters based on the digitzation of the surface profile were analyzed. Since the measured value varied according to the degree of reflection and the variation of colors at the measuring point, rock joint surface was painted in white to minimize the influence of the surface conditions. The comparison of the measured values and roughness parameters before and after painting revealed the better consequence from measurement on the painted surfaces. Also, effect of measuring interval was studied. As measured interval was increased, roughness parameters were exponentially decreased. The incremental sequence of degree of decrease was $SDH\; i_{ave},\; i_{rms},\; SD_i,\;and\; R_ p-1$. As a result of comparison of parameters from pin-type measurement system and laser type measurement system, all value of parameters were higher when laser-type measurement system was used, except SDH.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.164-167
• /
• 1996

This paper presents an off-line P.I.D parameter estimation method during normal operation in power plant. The process parameters are estimated using the recursive least square method. The controller parameters are estimated on the basis of desired characteristics of the dynamic model of the closed-loop control.

• 대한족부족관절학회지
• /
• 제11권1호
• /
• pp.8-12
• /
• 2007

Purpose: The purpose of this study was to investigate the differences in simple radiographic parameters and results of 3-D scan among normal and patient groups. Materials and Methods: Seventy subjects in each group were studied. Control group consisted of subjects without plantar foot pain (normal group), and two patient groups were one with plantar forefoot pain (metatarsalgia group), the other with plantar heel pain (heel pain group). Simple radiographic parameters were obtained and 3-D scan was done with foot scanner (Nexscan, K&I, Korea) and The height and volumn of the space under the medial longitudinal arch was analyzed (Enfoot, K&I, Korea). These parameters were compared and correlation between radiological parameters and results of the 3-D scan were studied. Results: The results of all parameters istributed normally. There was no signigicant differences among the groups in radiological parameters (talo-first metatarsal angle, calcaneal pitch angle and height of the talar head in standing lateral radiograph) and arch height and arch volumn on 3-D scan. There were statistically significant correlations between radiological and 3-D scan results. Conclusion: This study revealed that there is no significant differences in medial longitudinal arch height and volumn among normal and different patient groups and there are variety of arch height in patients with similar symptoms.

• Journal of the Korean Statistical Society
• /
• 제20권1호
• /
• pp.67-76
• /
• 1991

The empirical Bayes version involves ″independent″ repetitions(a sequence) of the component decision problem. With the varying sample size possible, these are not identical components. However, we impose the usual assumption that the parameters sequence $\theta$=($\theta$$_1$, $\theta$$_2$, …) consists of independent G-distributed parameters where G is unknown. We assume that G $\in$ g, a known family of distributions. The sample size $N_i$ and the decisin rule $d_i$ for component i of the sequence are determined in an evolutionary way. The sample size $N_1$ and the decision rule $d_1$$\in$ $D_{N1}$ used in the first component are fixed and chosen in advance. The sample size $N_2$and the decision rule $d_2$ are functions of *see full text($\underline{X}^1$equation omitted), the observations in the first component. In general, $N_i$ is an integer-valued function of *see full text(equation omitted) and, given $N_i$, $d_i$ is a $D_{Ni}$/-valued function of *see full text(equation omitted). The action chosen in the i-th component is *(equation omitted) which hides the display of dependence on *(equation omitted). We construct an empirical Bayes decision rule for estimating normal mean and show that it is asymptotically optimal.

• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1086-1093
• /
• 2011

To fabricate the aluminum alloys with good drawability, the textures evolution of the AA5182 sheets due to the change of lid parameter after rolling and subsequent annealing was studied. The measurement of the deformation textures was carried out for the sheets with high reduction ratio and the change of the recrystallization texture was investigated after heat-treatments of the rolled sheets in various I/d parameters. Rolling without lubrication and subsequent annealing led to the formation of favorable rot-$C_{ND}$ {001}<110> and ${\gamma}$-fiber ND//<111> textures in AA5182 sheets. From the results, the ${\gamma}$-fiber ND//<111> component well evolved during rolling at high lid parameter of 6.77. The initial shear deformation texture, especially, ${\gamma}$-fiber ND//<111> was not rotated during heat treatment in holding time of 180~7,200 seconds on AA5182 with I/d parameter of 6.77. Therefore, the AA5182 sheets were fabricated by controlling I/d parameter having well evolved ${\gamma}$-fiber ND//<111> which was advantageous in good drawability of the sheets.

• Journal of Communications and Networks
• /
• 제6권4호
• /
• pp.352-361
• /
• 2004

In this paper, we study how to achieve the maximum capacity under delay constraints for large mobile wireless networks. We develop a systematic methodology for studying this problem in the asymptotic region when the number of nodes n in the network is large. We first identify a number of key parameters for a large class of scheduling schemes, and investigate the inherent tradeoffs among the capacity, the delay, and these scheduling parameters. Based on these inherent tradeoffs, we are able to compute the upper bound on the maximum per-node capacity of a large mobile wireless network under given delay constraints. Further, in the process of proving the upper bound, we are able to identify the optimal values of the key scheduling parameters. Knowing these optimal values, we can then develop scheduling schemes that achieve the upper bound up to some logarithmic factor, which suggests that our upper bound is fairly tight. We have applied this methodology to both the i.i.d. mobility model and the random way-point mobility model. In both cases, our methodology allows us to develop new scheduling schemes that can achieve larger capacity than previous proposals under the same delay constraints. In particular, for the i.i.d. mobility model, our scheme can achieve (n-1/3/log3/2 n) per-node capacity with constant delay. This demonstrates that, under the i.i.d. mobility model, mobility increases the capacity even with constant delays. Our methodology can also be extended to incorporate additional scheduling constraints.

• 상하수도학회지
• /
• 제13권4호
• /
• pp.45-53
• /
• 1999

The microbial organisms named "Pseudomonas sp. LK-14" were isolated from farm land and shallow river sediment, activated, augmented and identified; which were using 2,4-D (2,4-Dichlorophenoxyacetic acid) as a sole carbon source and energy source. 2,4-D removal efficiency of LK-14 with 2,4-D sole carbon source (reactor S) were higher than that of Activated Sludge with 2,4-D sole carbon source (reactor A). Dynamic bioligical reaction kinetic parameters (sole carbon source was 2,4-D) obtained from batch reactor experiments were ${\mu}_{max}$ $0.105hr^{-1}$, $K_{s,24D}$ 15.64mg/L, $K_{i,24D}$ $1.94h^{r-1}$, $Y_{24D}$ 0.39 for LK-14 and ${\mu}_{max}$ $0.008hr^{-1}$, $K_{s,24D}$ 26.95mg/L, $K_{i,24D}$ $1.75hr^{-1}$, $Y_{24D}$ 0.10 for Activated Sludge. Using these parameters, we could predict the behaviors of 2,4-D substrate utilized by LK-14 and Activated Sludge in batch reactors. The kinetic parameters are enable to predict the 2,4-D substrate and microbial population behavior entering into wastewater treatment plants by using unsteady states dynamic simulation modeling technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.672-674
• /
• 2001

Axial magnetic field(AMF) type electrode can increase the interrupting capability of vacuum interrupters. But, this interrupting capability vary with design parameters such as shape of electrode, slits of contact, material of contact and so on. In this paper, shown arc characteristics of unipolar axial magnetic field type electrode for vacuum interrupter by design parameters such as shape of contact slits and diameter of contact. And, confirmed vacuum arc configuration by individual design parameter using high speed camera.

• Bulletin of the Korean Chemical Society
• /
• 제5권1호
• /
• pp.16-21
• /
• 1984

The relative Arrhenius parameters for t-butoxy radical decomposition (log $A_d$, $E_d$) and hydrogen abstraction of t-butoxy radical from hydrogen donor (log $A_d$, $E_d$) by competitive method were obtained as follows: for cyclohexane; log $A_a/A_d$ = -4.17 mole/l and $E_d-E_a$ = 9.01 kcal/mole, for isobutane; log $A_a/A_d$ = -5.70 mole/l and $E_e-E_a$= 11.0 kcal/mole. From the reported Arrhenius parameters for t-Butoxy radical decomposition reactions the parameters for t-Butoxy radical reactions with isobutane and cyclohexane are estimated to be log $A(l/mol{\cdot}sec)$ = 8.4, $E_a$ = 4.3 kcal/mol and $log A (l/mol{\cdot}sec)= 9.9,\;E_a$ = 6.3 kcal/mol, respectively.

• 방송공학회논문지
• /
• 제18권4호
• /
• pp.589-598
• /
• 2013

3차원 영상이 유발하는 입체 시각 피로를 이해하기 위해서는 이미 제작된 콘텐츠가 유발하는 시각피로 뿐 아니라 영상이 생성되는 촬영 시점에 영상을 결정하는 카메라 파라미터가 시각피로에 미치는 영향에 대한 연구가 필요하다. 본 연구는 카메라 파라미터인 회전 오차, 촬영 거리, 수렴 조건이 입체 시각 피로에 미치는 영향을 검증하고 모형화 하였다. 연구 결과 회전 오차, 촬영 거리, 수렴 조건이 모두 입체 시각 피로에 영향을 미치며 특히 카메라 오정렬 관련 파라미터인 회전 오차는 상대적으로 낮은 화면 시차에서 입체 시각 피로에 큰 영향을 미치는 것을 확인할 수 있었다.