• Conservation Science in Museum
• /
• v.1
• /
• pp.61-74
• /
• 1999

Elemental analysis of 40 glass samples from the Northern Tomb and the Southern Tomb of Hwangnam-daech'ong No. 98 was performed. Fourteen compositions of each sample were analyzed quantitatively by SEM-EDS and glass samples were classified by multivariate analysis such as PCA. All of 40 samples were confirmed to be Na₂O-CaO-SiO₂ system with about 20% of Na₂O. Samples were classified into two groups by doing PCA on concentrations of 5 major elements(SiO₂, Al₂O₃, Na₂O, CaO and K₂O). Samples included in group I showed the concentration of Al₂O₃ is about 9.7% and that of CaO, about 2.2%. In group II, concentration of Al₂O₃ is about 3.2% and that of CaO, about 4.9%. Especially yellow grains embedded in sample No. 12 were shown to be PbSnO₃ by micro XRD, which was the first coloring material ever found in Korea. Lead isotope ratios of samples No. 12 and No. 17 which contained lead were measured by TIMS. The origin of lead was traced by means of multivariate analysis such as SLDA. The result showed that lead from southern China and southern Korea had been used for making glass.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.3
• /
• pp.442-450
• /
• 1997

The chemical properties of water masses were investigated at 33 stations of the southeastern last Sea in February, 1995 on board R/V Tam-Yang. The water masses were not clearly distinguished due to the vortical mixing in winter. However, on the basis of the T-S and $T-O_2$ diagrams, water masses in the study area were divided into five groups (Type I, Type II, Type III, Type IV, Type V). (1) $>9.0^{\circ}C,\;>34.35\;psu,\;5.08\~5.60m\ell/\ell$ at Type I, (2) $6.0\~9.0^{\circ}C,\;34.15\~34.35\;psu,\;5.60\~5.90\;m\ell/\ell$ at Type II, (3) $4.0\~6.0^{\circ}C,\;34.00\~34.15\;psu,\;>5.90m\ell/\ell$ at Type III, (4) $1.5\~4.0^{\circ}C,\;34.00\~34.05\;psu,\;5.40\~5.90\;m\ell/\ell$ at Type IV, (5) $<1.5^{\circ}C,\;34.05\~34.07\;psu,\;4.80\~5.40\;m\ell/\ell$ at Type V. In the vertical profiles of nutrients, the concentrations were very low in the surface layer and increased rapidly with depth. The highest concentrations occurred in Type IV, while the concentrations in Type I were the lowest. The N/P ratios were less than Redfield ratio, indicating that nitrogenous nutrients were the limiting factor tor phytoplankton growth. The concentrations of POC and PON were in the range of $0.49\~20.03\;{\mu}g-at/\ell\;and\;0.09\~5.34\;{\mu}g-at/\ell$, respectively. The relatively high concentration occured in the surface layer of inner shore, showing that the concentration at each water mass followed the order Type I > Type II > Type III > Type IV > Type V, respectively. The C:N ratio in particulate organic matter was lower than the values reported in other region due to relatively high concentrations of PON in the study area. Relatively high ratios of POC to chlorophyll $\alpha$ during the study periods indicate that non-living detritus comparised most of the POC in the study area.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.7
• /
• pp.345-351
• /
• 2005

An out-of-step condition results from the loss of the synchronism of the generators. A disturbance in a power system causes the generator angle to oscillate. When there is a severe disturbance such as a heavy current fault loss of major generation or loss of a large block of load, the oscillation can be severe and even increase largely and finally the out-of-step condition may un. During the power swing and out-of-step conditions, the apparent impedance at a relay location changes, and the power flow also changes as the angle difference is varied. This paper presents a method to analyze the trajectory of complex power during a power swing and out-of-step condition. The trajectory of the complex power is analyzed when a power swings and a fault occurs. Moreover, the complex power is analyzed when the ratios between the voltages at both sides and the line impedances are changed. These methods are verified through simulation using the ATP/EMTP MODELS.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.180-187
• /
• 2016

In the present work, bael shell (aegle marmelos) is used as the feedstock for pyrolysis, using a fixed bed reactor to investigate the characteristics of the pyrolysis oil. The product yields, e.g., liquid, char and gases are produced from the biomass at different temperatures with the particle size of 0.5-1.0 mm, at the heating rate of $150^{\circ}C/min$. The maximum liquid yield, i.e., 36.23 wt.%, was found at $5500^{\circ}C$. Some physical properties of the pyrolysis oil such as calorific value, viscosity, density, pH, flash point and fire point are evaluated. The calorific value of the bael shell pyrolysis oil was 20.4 MJ/kg, which is slightly higher than the biomass, i.e., 18.24 MJ/kg. The H/C and O/C ratios of the bio-oil were found as 2.3 and 0.56 respectively, which are quite higher than some other bio-oils. Gas Chromatography and Mass Spectroscopy (GC-MS) and Fourier Transform Infra-red (FTIR) analyses showed that the pyrolysis oil of bael shell is mostly composed by phenolic and acidic compounds. The results of the properties of the bael shell pyrolysis oil reveal the potential of the oil as an alternate fuel with the essential upgradation of some properties.

• Corrosion Science and Technology
• /
• v.3 no.6
• /
• pp.245-250
• /
• 2004

A series of classical G109 type concrete specimens was exposed to cyclic wet and dry ponding with 15 w/o NaCl solution for approximately five years. Mix design variables included 1) three cement alkalinities (EqA of 0.97, 0.52, and 0.36) and 2) three water-cement ratios (0.50, 0.41, and 0.37). To determine the corrosion initiation time, corrosion potential and macro-cell current between top and bottom bars were monitored. Subsequent to corrosion initiation, specimens were autopsied and visually inspected. Concrete powder samples were collected from top rebar trace and chloride concentration was measured. Also, time-to-corrosion, $T_i$, for specimens of the individual mix designs was represented using Weibull analysis. Time-to-corrosion was a distributed parameter; and because of this, corrosion initiation of four identical specimens for each mix varied, often over a relatively wide range. Specimens fabricated using the lowest water cement ratio and the highest alkalinity cement exhibited the longest time-to-corrosion initiation and the highest chloride threshold levels. Time-to-corrosion did not increase monotonically with cement alkalinity, however, presumably as a consequence of relatively high $Cl^-$ binding in the lower pore water pH range. The chloride threshold level, $Cl_{th}$, increased with increasing $T_i$ and, consequently, was greatest for the highest cement alkalinity specimens.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.4
• /
• pp.244-251
• /
• 1991

This study was undertaken to assess the effectiveness of magnesium-and boron-enriched complex fertilizer(CF, N-P$_2$O$_{5}$-K$_2$O-MgO-B$_2$O$_3$: 14-10-12-3-0.2) on the maintenance and management of hilly pasture. The effectiveness of CF was compared to those of some straight fertilizers (SF). This first part of the study was concerned with the soil chemical properties and the mutural balances of mineral nutrients in the soils of a mixed grass-clover and a pure grass swards. The results of a two-year field experiment are summarized as follows: 1. The Mg contents in the soils of the CF plots were higher than those of the SF plots. On the other hand, the Ca contents were higher in the SF plots than in the CF plots. The contents of Mg and Ca, and CEC, except K, in both the CF and SF plots were considerably below the optimum levels. At the normal application rate of NPK, the contents of available P$_2$O$_{5}$ were close to the optimum level in both the CF and SF plots. 2. The contents of exchangeable Mg were lower than the K contents in soils of all the plots. At the normal application rate of NPK, the Mg contents in the CF plots, but not in the SF plots, were close to the critical level for general crops (0.29me Mg/100g soil). The Mg contents in soils of all the plots, however, were considerably below the critical level for pasture forages and grazing cows (0.41me/100g). 3. Considering the desirable base saturation level of soil, the saturation levels of Ca and Mg were insufficient in both the CF and SF plots. The saturation levels of Mg in the CF plots, however, were relatively good compared with the SF plots. The equivalent ratios or Mg/K, Ca/Mg. Ca:Mg:K, and %Mg of CEC in soils were generally unfavorable in all the plots. These ratios of the CF plots, however, were relatively better than those of the SF plots. 4. Considering the contents of exchangeable Ca and Mg in soils, it is suggested that the application of slaked magnesium lime as a soil amelioration might be desirable for the fundamental increment of those contents at pasture establishment.

• Nuclear Engineering and Technology
• /
• v.34 no.1
• /
• pp.42-59
• /
• 2002

In order to transmute long-lived radioactive nuclides such as transuranics(TRU), Tc-99, and I- l29 in LWR spent fuel, a preliminary conceptual design study has been performed for the accelerator driven subcritical reactor system, called HYPER(Hybrid Power Extraction Reactor) The core has a hybrid neutron energy spectrum: fast and thermal neutrons for the transmutation of TRU and fission products, respectively. TRU is loaded into the HYPER core as a TRU-Zr metal form because a metal type fuel has very good compatibility with the pyre- chemical process which retains the self-protection of transuranics at all times. On the other hand, Tc-99 and I-129 are loaded as pure technetium metal and sodium iodide, respectively. Pb-Bi is chosen as a primary coolant because Pb-Bi can be a good spallation target and produce a very hard neutron energy spectrum. As a result, the HYPER system does not have any independent spallation target system. 9Cr-2WVTa is used as a window material because an advanced ferritic/martensitic steel is known to have a good performance under a highly corrosive and radiation environment. The support ratios of the HYPER system are about 4∼5 for TRU, Tc-99, and I-129. Therefore, a radiologically clean nuclear power, i.e. zero net production of TRU, Tc-99 and I-129 can be achieved by combining 4 ∼5 LWRs with one HYPER system. In addition, the HYPER system, having good proliferation resistance and high nuclear waste transmutation capability, is believed to provide a breakthrough to the spent fuel problems the nuclear industry is faced with.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.403-407
• /
• 1997

Separation factor for $^6Li$ and $^7Li$ have been determined using ion exchange resin having 1,7,13-trioxa-4,10,16-triazacyclooctadecane($N_3O_3$) as an anchor group. The lighter isotope, $^6Li$ is concentrated in the solution phase, while the heavior isotope, $^7Li$ is enriched in the resin phase. By Ccolumnl chromatography[0.9cm(I.D)${\times}$20cm(height)] using 2.0M ammonium chloride solution as an eluent, single separation factor, ${\alpha}$, 1.009. i.e.$(^7Li/^6Li)_{resin}$/$(^7Li/^6Li)_{solution}$ was obtained by the Glueckauf theory from the elution curve and isotope ratios.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1353-1357
• /
• 2007

Second-order rate constants (kN) have been determined spectrophotometrically for reactions of Y-substituted phenyl 2-furoates (1a-h) with piperidine and morpholine in 80 mol % H2O/20 mol % DMSO at 25.0 ± 0.1 oC. The Brønsted-type plot exhibits a downward curvature for the reactions with strongly basic piperidine but is linear for the reactions with weakly basic morpholine. The slope of the curved Brønsted-type plot changes from -1.25 to ?0.28 as the pKa of the conjugate acid of the leaving aryloxides decreases. The pKa at the center of the Brønsted curvature, defined as pKa°, was determined to be 6.4. The aminolysis of 1a-h has been concluded to proceed through a stepwise mechanism on the basis of the curved Brønsted-type plot. The reactions of Ysubstituted phenyl cinnamates (2a-g) with piperidine resulted in a curved Brønsted-type plot with a pKa° values of 6.4. However, the curved Brønsted-type plot has been suggested to be not due to a change in the RDS but due to a normal Hammond effect of a concerted mechanism, since the Brønsted-type plot for the corresponding reactions with morpholine results in also a curved Brønsted-type plot with a pKa° values of 6.1. The furoates with a basic leaving group (i.e., 1b-g) are less reactive than the corresponding cinnamates (i.e., 2b-g). The k2/ k-1 ratios for the reactions of 1b-h are much smaller than unity, which has been suggested to be responsible for their low reactivity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.2
• /
• pp.97-100
• /
• 1987

Medium grade mongranular compound fertilizers for the crops under vinyl mulching cultivation were formulated using the principal materials of urea, DAP and MOP in combination with various fillers of zeolite, gypsum and treated human waste and granulated with waste liquid of glutamic acid fermentation as binder. The ratios of $N-P_2O_5-K_2O$ of trial products were 12-10-11.5 for red pepper, 8-8-6 for sesame and 4-9-14 for peanut. The rate of dissolution of trial products was comparatively low in water. The product for red pepper had N dissolution rate of 80 percent during 24 hrs. 70 for peanut and 55 for seasame. The optimum dissolution rate has reported to be 50 percent by the standard laboratory dissolution test for 24 hrs. in water. Therefore, the slowly released characteristics were obtained with the products that had 24 hrs. dissolution of 70 to 60 percent. One time basal application of trial products could readily be justified under muching cultivation.