• Journal of Chest Surgery
• /
• v.25 no.3
• /
• pp.220-231
• /
• 1992

We have performed 28 single lung transplantation in mongrel dogs transplanting the left lung exclusively from November 1989 to September 1991, in the department of thoracic surgery of Seoul National University Hospital. In the donor dogs, the main pulmonary artery was divided proximal to its bifurcation, and the left atrium was incised freeing the left veins with a generous atrial cuff. We used cold saline in the first 7 transplantations and Euro-Collins or modified Euro-Collins solution in the remaining 17 transplantations as a lung preservatives. The bronchus was divided at two cartilage rings proximal to the upper lobe bronchus take off. In the recipient procedure, we used a Fogarty catheter as a bronchus block. Left atrial anastomosis was performed first using 5-O prolene and the pulmonary artery was anastomosed using 6-O prolene. The bronchus was anastomosed next with 4-O vicryl interruptedly and covered with a greater omentum which had been prepared previously. All dogs received cyclosporin A and azathioprine as immunosuppressants and were divided into two group. In the 10 Group I dogs, they survived within 6 days, mean survival time was 66.8$\pm$53.4 hours. In remainder 14 Group lI dogs, they survived above 6 days, mean survival time was 9. 5$\pm$5.6 days. The cause of death were as follows: 2 cases of sacrifice, 2 cases of respiratory insufficiency during operation, 2 cases of arrhythmia immediate postoperatively, 2 cases of bleeding, others in Group I, and 6 cases of sacrifice, 4 cases of sepsis, 3 cases of bleeding, others in Group lI. Results of bronchoscopic findings were obstruction above 50% in 12 cases of 16 performance cases within 5th day. Early chest radiologic haziness were showed, and total lung perfusion defect was frequently showed in both group within 7th day. Main autopsy findings were left atrial and pulmonary arterial thrombi and bronchial obstruction The major histologic findings of Group I were pleural exudate, hemorrhagic infarct, pulmonary congestion, and interesting histologic findings of Group II were 3 cases of perivascular or peribronchial lymphocyte infiltration, 3 cases of hemorrhage infarct, 2 cases of interstitial pneumonitis. The structual change of bronchioles, suggesting bronchiolitis obliterans was not observed due to improper preparation of proximal pulmonary tissue and short term survival times.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.140-151
• /
• 1996

In this study, we designed the routing structure and logic block of a SRAM cell-based FPGA with symmetrical-array architecture. The designed routing structure is composed of switch matrices, routing channels and I/O blocks, and the routing channels can be subdivided into single length channels, double length channels and global length channels. The interconnection between wires is made through SRAM cell-controlled pass transistors. To reduce the signal delay in pass transistors, we proposed a scheme raising the gate-control voltage to 7V. The designed SRAM cells have built-in shift register capability, so there is no need for separate shift registers. We designed SRAM cells in the LUTs(look-up tables) to enable the wirte operations to be performed synchronously with the clock for ease of system application. Each logic block (LFU) has four 4-input LUTs, flip-flops and other gates, and the LUTs can be used a sSRAM memory. The LFU also has a dedicated carry logic, so a 4-bit adder can be implemented in one LFU. We designed our FPGA using 0.6.mu.m CMOS technology, and simulation shows proper operation of a 4 bit counter at 100MHz.

• Journal of Periodontal and Implant Science
• /
• v.33 no.2
• /
• pp.301-310
• /
• 2003

The purpose of this study is to evaluate the biocompatibility and the biorsorbability of several types of calcium polyphosphate made through change of manufacturing process for 12 month. To solve limitation of calcium phosphate, we developed a new ceramic, Calcium Polyphosphate(CPP), and report the biologic response to CPP in extraction sites of beagle dog. Porous CPP blocks were prepared by condensation of anhydrous $Ca(H_2PO_4)_2$ to form non-crystalline $Ca(PO_3)_2$ and then milled to produce CPP powder. CPP powder, CPP block, and CPP granules added with $Na_2O$ were implanted in extraction sockets and histologic observation were performed at 12 months later. Like 3 months results, histologic observation at 12 months revealed that CPP matrix were mingled with and directly apposed to new bone without any adverse tissue reaction, CPP powder show direct bony contact, but new bone formation and fibrous tissue encapsulation showed in CPP block. 10% $Na_2O$ CPP granules show more inflammatory cells infiltration around graft materials compared at 3 month, but 15% $Na_2O$ CPP granules show less. This result revealed that regardless of addition of $Na_2O$, CPP had a high affinity for bone and had been resorbed slowly. From this results, it was suggested that CPP is promising ceramic as a bone substitute and addition of $Na_2O$ help biodegradation but optimal concentration of $Na_2O$ and other additive component to increase degradation rate should be determined in further study.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.134-145
• /
• 2004

With rapid growth in the amount of data transferred on the Internet, traditional storage systems have reached the limits of their capacity and performance. SAN (Storage Area Network), which connects hosts to disk with the Fibre Channel switches, provides one of the powerful solutions to scale the data storage and servers. In this environment, the maintenance of data consistency among hosts is an important issue because multiple hosts share the files on disks attached to the SAN. To preserve data consistency, each host can execute the disk I/O whenever disk read and write operations are requested. However, frequent disk I/O requests cause the deterioration of the overall performance of a SAN cluster. In this paper, we introduce a SANtopia global buffer manager to improve the performance of a SAN cluster reducing the number of disk I/Os. We describe the design and algorithms of the SANtopia global buffer manager, which provides a buffer cache sharing mechanism among the hosts in the SAN cluster. Micro-benchmark results to measure the performance of block I/O operations show that the global buffer manager achieves speed-up by the factor of 1.8-12.8 compared with the existing method using disk I/O operations. Also, File system micro-benchmark results show that SANtopia file system with the global buffer manager improves performance by the factor of 1.06 in case of directories and 1.14 in case of files compared with the file system without a global buffer manager.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.8
• /
• pp.45-52
• /
• 2011

Flash memory is becoming widely prevalent in various area due to high performance, non-volatile features, low power, and robust durability. As price-per-bit is decreased, NAND flash based SSDs (Solid State Disk) have been attracting attention as the next generation storage device, which can replace HDDs (Hard Disk Drive) which have mechanical properties. Especially for the single package SSD, if channel number or FIFO buffer size per channel increases to improve performance, the size of a controller and I/O pin count will increase linearly with channel numbers and form factor will be affected. We propose a novel technique which can minimize form factor by optimizing the number of NAND flash channels and the size of interface FIFO buffer in the SSD. For SSD with 10 channel and double buffer, the experimental results show that buffer block size can be reduced about 73% without performance degradation and total size of a controller can be reduced about 40% because control block per channel and I/O pin count decrease according to decrease channel number.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.645-653
• /
• 2016

Ransomware was first created in 1999, but its existence become widely known in Korean by 2015. As information and communication technology have developed, the storage capacity of computer has enlarged, it accordingly is getting more important to effectively manage these information, rather than the information itself. In such situation, the ransomware break into other people's computer and encrypt an files without a user's permission. So, it adversely affect the user. In this paper, we monitor an access of a specific process to the file. And on the basis of this monitoring information, we detect whether the abnormal approach happened. Through the detection result, we block the permission about access to the file for a specific process. Using this method, we propose a blocking technique for the ransomeware's abnormal approach and encryption to the files.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.21-30
• /
• 2011

In the global IT market, a lot of issues for responding to various environmental regulations emerged. In case of the data centers, it is consuming huge amounts of energy to maintain. So there have been various technical attempts as Consolidation, Virtualization, Optimization to efficiently manage energy and data storage to fix the problems. In this paper, we propose a new RAID(Redundant Array of Independent Disks) mechanism which is differing the intensity of power consumption and works to provide data protection and disaster recovery(backup, mirroring etc.) to stratify multiple volumes. G-RAID minimize the power consumption and the lower of I/O performance by selecting the volume depending on the frequency of data access while classifying the power consumption between volumes in storage system. Also, it is possible that a filesystem and block map information of G-RAID is processed by basic unit which is group located in a row for the blocks to work efficiently and can minimize the performance degradation of block mapping load by the access frequency in each groups. As a result, we obtained to elevate a little bit of response time caused by block relocation work, but showed the decrease of power consumption by 38%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.85-88
• /
• 2012

DSCs are based on a dye-adsorbed porous $TiO_2$ layer as a photo electrode [1]. Under the illumination, dye molecules are excited and electrons are produced. The injected electrons in the conduction band of $TiO_2$ may recombine with the electrolyte. To obtain high performance DSCs, it is essential to retard the recombination. The charge recombination can be reduced by forming core-shell structure. In this work, we investigated the core-shell structure with $Al_2O_3$ and MgO coating layer on the porous $TiO_2$ layer. We confirmed the photovoltaic properties by I-V characteristics. The current and the efficiency was improved. In addition to, Through decrease in the width of EIS arc, which is the sum of the interfacial charge transfer resistances of both electrodes, we can be indicated that the block effect.

• The Korean Journal of Food And Nutrition
• /
• v.2 no.2
• /
• pp.8-13
• /
• 1989

A strain of Saccharomyces cerevisiae BY-366 was found to produce a strong sucrose-hydrolyzing enzyme Using this strain, the optimal culture conditions for the production of invertase were investigated. The results are as follows : 1. For enzyme production, optimal temperature, initial pH and critical concentrations of sucrose and raffinose were 3$0^{\circ}C$, 5.0 and 3.0%, respectively. 2. Enzyme production was reached maximum by organic nitrogen source, 0.3% yeast extract plus 0.5% bactopeptone. 3. It was appeared the presence of 0.1 M Mn2+ and Fe2+ ion was essential factors, on the other hand, 0.1 M Ag+ and Hg2+ ion almost block in yeast growth and enzyme production. 4. Invertase productivity was reached maximum within 3 days on stationary culture with medium-composed of sucrose 3%, bactopeptone 0.5%, yeast extract 0.3%, KEHPO. 0,1%, MgSO4.7H2O 0.05%.

• YAKHAK HOEJI
• /
• v.24 no.2
• /
• pp.135-141
• /
• 1980

The crystal and molecular structure of 2-methyl-3-(N-trimethyl ammonium)phenol iodide, $C_{10}H_{16}NOI, was determined by X-ray diffraction method. The compound crystallizes in the orthorhombic space group $P_{na2}_{1}$ with a=13.327(3), b=12.496(3), C=7.227(2)A and Z=4. A total of 489 independent observed reflections were collected by the automated Four-circle diffractometer and was solved by heavy atom method and refined by anisotropic block-diagonal least-squares method to the R value of 0.04. The benzene ring is slightly distorted from regular hexagon. The I atom and 2-methyl-3-(N-trimethyl ammonium)phenol group is held together by van der Waals forces in the crystal. Intermolecular hydrogen bond is of the type O-H....I with the length 3.35.angs.. Apart from the hydrogen bonding system the molecules are held together by van der Waals forces in the crystal.