• Journal of the Korean Vacuum Society
• /
• v.16 no.1
• /
• pp.1-6
• /
• 2007

We have analyzed the atomic structure of O/Fe(100) and interface atomic structure of MgO deposited on Fe(100) surface using LEED I/V curve analysis. As the O adsorption on the Fe(100) surface, the first substrate interlayer distance is expanded by up to 16%. For 1ML MgO deposited on Fe(100) surface, the oxygen ions of MgO are located on-top of the Fe atoms, the interlayer distance at the MgO/Fe interface are expanded. From the AIA(average intensity mixing approximation) calculation, we find the interface structure of monolayer MgO on Fe(100) system has the two interface structure with MgO/FeO/Fe(100) and MgO/Fe(100). This supports the results of EELS experiment that shown existence of stretched FeO layer and coexistance of MgO/FeO/Fe(100) and MgO/Fe(100) structure.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.412-415
• /
• 2003

The purpose of this present study was to investigate the polymorphism of esterase locus for individual identification and parentage verification in Jeju native horse (JNH). Seventy three random JNH samples were studied by polyacrylamide gel isoelectric focusing(IEF) at pH 3.5 ∼ 6.0. We detected international recognized alleles, F, G, H, I, M, and an silent allele $I^o$. Gene frequencies of allele I showed 0.479 the highest, while allele H and M($I^o$) with relatively low frequencies were 0.027 and 0.014, respectively.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.558-567
• /
• 2001

본 연구에서는 알콕사이드를 전구물질로 하는 졸겔공정을 이용하여 Bi 과잉 12 mol%의 조성인 B $i_4$ $Ti_3$ $O_{12}$ 박막과 B $i_4$ $Ti_{3-x}$T $a_{x}$ $O_{12}$(x=0.1, 0.2, 0.3) 박막을 제조하였다. XPS 분석에 따르면 Ta 치환 x=0.2에서 Bi 4f의 photoemission 곡선이 낮은 결합에너지로 이동하였고 피크 강도가 감소하는 현상이 관측되었다. 이는 x=0.1과 0.2 사이에서 Bi-O 결합이 길어져 인장상태 하에 있었음을 나타내었다. B $i_4$ $Ti_3$ $O_{12}$(BIT) 박막의 유전상수와 유전손실은 100 kHz에서 340, 0.05이었고, B $i_4$ $Ti_{3-x}$T $a_{x}$ $O_{12}$ 박막에서 이들 값은 x=0.1에서 가장 높았으며, 각각 480, 0.13이었다. B $i_4$ $Ti_3$ $O_{12}$ 박막의 잔류분극과 항전계는 1.24$\mu$C/$ extrm{cm}^2$, 31.4 kV/cm 이었으나, Ta 치환 x=0.2에서 이들 값은 각각 19.7$\mu$C/$\textrm{cm}^2$, 49.5 kV/cm 에 이르렀다. 또한, B $i_4$ $Ti_3$ $O_{12}$ 박막의 누설전류 밀도는 ~$10^{-6}$ A/$\textrm{cm}^2$ 정도이었으며, Ta 치환은 누설전류를 감소시켜 Ta 치환 x=0.2 이상에서 BIT 박막에 비해 한 차수 정도 낮아졌다. Ta 치환에 따른 B $i_4$ $Ti_3$ $O_{12}$ 전기 물성에서 변화는 Bi-O 결합에서 관측된 인장상태로의 전이와 연관성이 있었으며, 덧붙여 치환에서 생성된 전자에 의한 정공보상이 이에 영향을 끼쳤다. 정공보상이 이에 영향을 끼쳤다.끼쳤다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.5
• /
• pp.383-390
• /
• 2001

We have investigated the L $i_{1+x}$M $n_2$ $O_4$system as a cathode material for lithium rechargeable batteries. To improve the cycle performance of spinel LiM $n_2$ $O_4$ as the cathode of 4V class lithium secondary batteries, spinel phase L $i_{1+x}$M $n_2$ $O_4$(x=0, 0.025, 0.05, 0.075) was prepared at 75$0^{\circ}C$ for 48h. The preparation of L $i_{1+x}$M $n_2$ $O_4$ from L $i_2$ $O_3$ and Mn $O_2$ under air is studied. The compounds were synthesized by using solid-state reaction. Structural refinements were carried out with a Rietveld-refinement program. Electrochemical properties were examined using the Li/L $i_{1+x}$M $n_2$ $O_4$ cells. The capacity of L $i_{1+x}$M $n_2$ $O_4$ decreases with increases lithium content, while the cycle life improves. The initial discharge capacity are 118mAh/g and 116mAh/g for LiM $n_2$ $O_4$ decreases with increases lithium content, while the cycle life improves. The initial discharge capacity are 118mAh/g and 116mAh/g for LiM $n_2$ $O_4$ and L $i_{1.025}$M $n_2$ $O_4$, respectively.pectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.54-62
• /
• 2015

Although NAND flash-based SSD (Solid-State Drive) provides superior performance in comparison to HDD (Hard Disk Drive), it has a major drawback in write endurance. As a result, the lifetime of SSD is determined by the workload and thus it becomes a big challenge in current technology trend of such as the shifting from SLC (Single Level Cell) to MLC (Multi Level cell) and even TLC (Triple Level Cell). Most previous studies have dealt with wear-leveling or improving SSD lifetime regarding hardware architecture. In this paper, we propose the optimal configuration of host I/O stack focusing on file system, I/O scheduler, and link power management using JEDEC enterprise workloads in terms of WAF (Write Amplification Factor) which represents the efficiency perspective of SSD life time especially for host write processing into flash memory. Experimental analysis shows that the optimum configuration of I/O stack for the perspective of SSD lifetime is MinPower-Dead-XFS which prolongs the lifetime of SSD approximately 2.6 times in comparison with MaxPower-Cfq-Ext4, the best performance combination. Though the performance was reduced by 13%, this contributions demonstrates a considerable aspect of SSD lifetime in relation to I/O stack optimization.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.463-476
• /
• 2006

R-trees have been traditionally optimized for the I/O performance with the disk page as the tree node. Recently, researchers have proposed cache-conscious variations of R-trees optimized for the CPU cache performance in main memory environments, where the node size is several cache lines wide and more entries are packed in a node by compressing MBR keys. However, because there is a big difference between the node sizes of two types of R-trees, disk-optimized R-trees show poor cache performance while cache-optimized R-trees exhibit poor disk performance. In this paper, we propose a cache and disk optimized R-tree, called the PR-tree (Prefetching R-tree). For the cache performance, the node size of the PR-tree is wider than a cache line, and the prefetch instruction is used to reduce the number of cache misses. For the I/O performance, the nodes of the PR-tree are fitted into one disk page. We represent the detailed analysis of cache misses for range queries, and enumerate all the reasonable in-page leaf and nonleaf node sizes, and heights of in-page trees to figure out tree parameters for best cache and I/O performance. The PR-tree that we propose achieves better cache performance than the disk-optimized R-tree: a factor of 3.5-15.1 improvement for one-by-one insertions, 6.5-15.1 improvement for deletions, 1.3-1.9 improvement for range queries, and 2.7-9.7 improvement for k-nearest neighbor queries. All experimental results do not show notable declines of the I/O performance.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.119-127
• /
• 2014

This study aims to determine whether or not the input output life cycle assessment (I-O LCA) model can be used to assess the carbon dioxide (CO2) emission of buildings in initial planning phase. To ensure this end, this study proposed I-O LCA model which is the simplified LCA model and Hybrid LCA model which is the detailed LCA model, and then assessed and compared the CO2 emission of six case projects (three apartment complexes and three educational facilities) using the two LCA model. The results of the case study showed that the CO2 emissions assessed by the I-O LCA is significantly similar to the CO2 emission assessed by the Hybrid LCA model. The similarity of results from both LCA models was 78.2-86.3% in apartment complexes and 59.9-84.8% in educational facilities. However, the CO2 emissions from I-O LCA model were smaller than the CO2 emissions from Hybrid LCA model in case study. Nevertheless, the case study showed that the I-O LCA model was capable of assessing the CO2 emission of buildings quite appropriately although the I-O LCA model is the simplified LCA model which considers only the construction cost. The I-O LCA model is expected to be a useful tool for assessing the CO2 emission of buildings in initial planning phase.

• Journal of KIISE
• /
• v.42 no.2
• /
• pp.169-176
• /
• 2015

The atomic write technique is a good solution to solve the problem of the double write buffer. The atomic write technique needs modified I/O subsystems (i.e., file system and I/O schedulers) and a special SSD that guarantees the atomicity of the write request. In this paper, we propose the writing unit aligned block allocation technique (for EXT4 file system) and the merge prevention of requests technique for the CFQ scheduler. We also propose an atomic write-supporting SSD which stores the atomicity information in the spare area of the flash memory page. We evaluate the performance of the proposed atomic write scheme in MariaDB using the tpcc-mysql and SysBench benchmarks. The experimental results show that the proposed atomic write technique shows a performance improvement of 1.4~1.5 times compared to the double write buffer technique.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.253-259
• /
• 2020

Most of today's large-scale cloud systems and enterprise data centers are distributing resources to improve scalability and resource utilization. NVMe-over-Fabric protocol allows submitting NVMe commands to a remote NVMe SSD through RDMA (Remote Direct Memory Access) network. It is attracting attention recently because it is possible to construct a disaggregation storage system with low latency through the protocol. However, the current I/O stack of NVMe-over-Fabric has an inefficient structure for maintaining compatibility with the traditional I/O stack. Therefore, in this paper, we propose a new mechanism to reduce I/O latency and CPU overhead by modifying I/O path of NVMe-over-Fabric to pass through legacy block layer. According to the performance evaluation results, the proposed mechanism is able to reduce the I/O latency and CPU overhead by up to 22% and 24% compared to the existing NVMe-over-Fabrics protocol, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2017

This paper presents an optimized adoption of NVM for the storage system of heterogeneous applications. Our analysis shows that a bulk of I/O does not happen on a single storage partition, but it is varied significantly for different application categories. In particular, journaling I/O accounts for a dominant portion of total I/O in DB applications like OLTP, whereas swap I/O accounts for a large portion of I/O in graph visualization applications, and file I/O accounts for a large portion in web browsers and multimedia players. Based on these observations, we argue that maximizing the performance gain with NVM is not obtained by fixing it as a specific storage partition but varied widely for different applications. Specifically, for graph visualization, DB, and multimedia player applications, using NVM as a swap, a journal, and a file system partitions, respectively, performs well. Our optimized adoption of NVM improves the storage performance by 10-61%.