• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.991-996
• /
• 2010

In this paper, we designed a parallel I/O control system using IEEE 1284 operating modes and implemented remote control communication under the internet environment. The IEEE 1284 standard defines an interface compatible with several distinct operation modes and brings higher performance to the PC parallel port. Therefore, parallel port devices become easier to configure and simplify interface because new operating systems bring PnP function to the parallel port with the Device/ID identification sequence. With these enhancements, the parallel port become an even better low-cost, readily available I/O port on the PC.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.966-969
• /
• 2008

사용자 프로그램의 I/O 패턴을 분석하거나 파일 시스템의 워크로드를 보다 정확하게 분석하기 위해서 실제 가동중인 파일 시스템의 동적 I/O 로그를 확보하기 위한 연구들이 많이 진행되어 왔다. 그러나 대량의 I/O 트렌젝션(transcation)이 처리되는 파일 시스템에서 동적 I/O 로그를 확보하는 일은 시스템의 부하와 막대한 데이터량 때문에 한계가 많다. 특히 다수의 이용자가 사용하는 대용량 분산/병렬 파일 시스템에서의 I/O Tracing은 로컬 파일 시스템에서 I/O Tracing에 비해 더욱 복잡하고 오버헤드가 크다. 본 논문에서는 기존의 파일 시스템 로깅 방법들을 알아보고, 클러스터 시스템에서 널리 이용되고 있는 분산 파일 시스템인 PVFS(Parallel Virtual File System)에서 동적 I/O 연산들의 로그를 생성할 수 있는 로깅 시스템을 제안하고 설계하였다.

• Journal of the Korean Ceramic Society
• /
• v.33 no.6
• /
• pp.653-659
• /
• 1996

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.179-184
• /
• 2000

The I-V characteristics of $ZnO-Pr_6O_{11}-CoO-Dy_2O_3$ based varistors were investigated in the $Pr_6O_{11}/CoO$ composition ratio range of 0.5/0.5 to 1.0/1.0 and sintering temperature range of 1300 to $1350^{\circ}C$ as the basic study to develop the advanced $Pr_6O_{11}$-based ZnO varistors. All varistors except for $Pr_6O_{11}$/CoO = 0.5/1.0 exhibited the best I-V characteristics at $1350^{\circ}C$. However, the varistors with $Pr_6O_{11}$/CoO= 0.5/1.0 exhibited the best I-V characteristics at $1350^{\circ}C$. The varistors with $Pr_6O_{11}$/CoO= 0.5/1.0 of all varistors exhibited the best I-V characteristics, which the nonlinear exponent is 36.9 and the leakage current is 7.6 ${\mu}A$ Therefore, it was estimated that ZnO-$Pr_6O_{11}-CoO-Dy_2O_3$ ceramics with $Pr_6O_{11}$/CoO= 0.5/1.0 will be usefully used as varistor materials in the future.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.12a
• /
• pp.3-11
• /
• 2004

The power loss analysis was carried out for Ni-Cu-Zn ferrite samples with different content of NiO and ZnO. The power loss, Pcv decreases monotonically wi increasing temperature and attains to a certain value at around $100\~120$ degrees Celsius. The frequency dependence of Pcv can be explained by $Pcv\~f^n$', and n is independent of the frequency, f up to 1MHz. The Pcv decreases with an increase in ZnO/NiO. The Pcv was separated to hysteresis loss, Ph and residual loss, (Pcv-Ph). The temperature characteristics and compositional dependence of Pcv can be attributed to the Ph, while (Pcv-Ph) is not affected by both temperature and ZnO/NiO. By analyzing temperature and composition dependence of Ph and initial permeability, ${\mu}^i$ following equations could be formularized. $${\mu}_i{\mu}o=I_x\;^2/(K_1+bs_ol_s)\;\;\;\;(1)$$ $Wh=13.5(I_s\;^2/{\mu}_i{\mu}_o)\;\;\;\;(2)$$ Were ${\mu}_o$ is permeability of vacuum, $I_s$ saturation magnetization, $K_1$ anisotropy constant, $S_o$ internal heterogeneous stress, $I_s$, magnetostriction constant, b unknown constant. Wh hysteresis loss per one cycle of excitation (Ph: Wh*f). Steinmetz constant of Ni-Cu-Zn ferrites, $m=1.64\~2.2$ is smaller than the one of Mn-Zn ferrites, which suggests the difference of loss mechanism between these materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.444-447
• /
• 2000

The spinel L $i_{1-x}$ M $n_2$ $O_4$has been synthesized by the solid-state reaction. L $i_{l-x}$M $n_2$ $O_4$which includes a mixture of LiOH . $H_2O$ and Mn $O_2$prepared by preliminary heating at 35$0^{\circ}C$ for 12hr. L $i_{l-x}$M $n_2$ $O_4$fired at temperature range from 75$0^{\circ}C$ for 48hr. The structure and the electrochemical characteristics of spinel to L $i_{1-x}$ M $n_2$ $O_4$which is fabricated by changing sintering condition from starting materials are investigated. The cyclic voltammetric measurement was performed using 3 electrode cells. Electrode specific capacity and cycle life behavior were tested in a 3.0~4.2V range at a constant current density of 0.45mA/c $m^2$. To improve the cycle performance of spinel L $i_{l-x}$M $n_2$ $O_4$as the cathode of 4V class lithium secondary batteries, spinel phases L $i_{1-x}$ M $n_2$ $O_4$were Prepared at various lithium. The results showed that discharge capacity of L $i_{l-x}$M $n_2$ $O_4$varied at lithium quantity decrease with increasing lithium add quantity. The discharge capacities of L $i_{0.925}$M $n_2$ $O_4$and LiM $n_2$ $O_4$revealed 108 and 117mAh/g, respectively.spectively.y.

• KIISE Transactions on Computing Practices
• /
• v.24 no.1
• /
• pp.40-45
• /
• 2018

With the advent of big data and social networks, large-scale graph processing becomes popular research topic. Recently, an optimization technique called Gorder has been proposed to improve the performance of in-memory graph processing. This technique improves performance by optimizing the graph layout on memory to have better cache locality. However, since it is designed for in-memory graph processing systems, the technique is not suitable for disk-based graph engines; also the cost for applying the technique is significantly high. To solve the problem, we propose a new graph ordering called I/O Order. I/O Order considers the characteristics of I/O accesses for SSDs and HDDs to improve the performance of disk-based graph engine. In addition, the algorithmic complexity of I/O Order is simple compared to Gorder, hence it is cheaper to apply I/O Ordering. I/O order reduces the cost of pre-processing up to 9.6 times compared to that of Gorder's, still its performance is 2 times higher compared to the Random in low-locality graph algorithms.

• Textile Coloration and Finishing
• /
• v.14 no.4
• /
• pp.208-213
• /
• 2002

In dyeing PET/Spandex blends with disperse dyes, many disperse dyes are absorbed more readily into Spandex than PET. Inorganic/organic(I/O) values can characterize the affinity of disperse dyes for Spandex and PET fibers. As I/O values of disperse dyes approach that of Spandex, the dye uptake in Spandex increases. On the contrary, the disperse dyes of higher I/O values are absorbed more into PET than Spandex. The dye uptake in PET increases with increasing I/O values of disperse dyes. As I/O values of disperse dyes increase, the rate of dyeing become slower in the dyeing of PET/Spandex blends. Hence, the affinity and the compatibility of disperse dyes in PET/Spandex blends dyeing can be evaluated with I/O value.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.460-464
• /
• 2010

SSD는 뛰어난 성능으로 인해 서버 시장에서 HDD를 빠르게 대체하며 각광받고 있다. 우리는 기존 SSD의 성능 분석이 단일한 I/O 패턴에 대해서만 이루어진 점을 주목하여, 다양한 패턴의 I/O가 동시에 수행 될 경우, 성능에 어떠한 영향이 있는지 평가해보고자 한다. 이를 위해 4KB부터 64MB까지 다양한 블록크기로 순차적/임의적 읽기/쓰기 연산을 수행함과 동시에 4KB 단위의 읽기/쓰기 I/O를 수행시켜 성능에 미치는 영향을 알아보았다. 이러한 평가를 네 가지 리눅스 I/O 스케줄러에 대해 각각 수행함으로써 스케줄러에 의한 영향 또한 평가하였다. 그 결과로 우리는 새로운 SSD의 성능 특성을 발견할 수 있었으며, 이는 새로운 I/O 스케줄러 및 SSD의 FTL 개발의 기반이 되리라 예상된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.442-444
• /
• 2003

병렬 처리를 요구하는 계산 과학 분야의 문제들 중에는 대용량 데이터 처리를 필요로 하는 경우가 많다. 그러나 기존의 파일 시스템을 그대로 병렬처리 환경에 적용하기에는 많은 문제가 따른다. 이를 위해서 병렬처리를 지원하는 파일 시스템에 대한 연구와 개발이 진행되어 오고 있다. 이와 같은 연구 중 하나인 집합 I/O(Collective I/O)를 본 논문에서 다루고자 한다. 이 집합 I/O는 여러 프로세스의 파일 I/O 요청을 효과적으로 처리하는 방법으로 MPl2의 MPI-10에도 포함되어 있다. 본 논문에서는 어플리케이션 프로그램 측면에서 MPI-10의 집합 I/O를 효과적으로 사용하기 위한 방안을 제시하며, 보편적으로 사용되는 NFS를 이용한 클러스터 시스템에서의 실험 결과를 분석한다.