• Structural Engineering and Mechanics
• /
• 제50권6호
• /
• pp.797-816
• /
• 2014

Cooling tower is analyzed as an assembly of layered nonlinear shell elements. Geometric representation of the shell is enabled through layered nonlinear shell elements to define the different layers of reinforcements and concrete by considering the material nonlinearity of each layer for the cooling tower shell. Modal analysis using Ritz vector analysis and nonlinear time history analysis by direct integration method have been carried out to study the effects of the inclination of the supporting columns of the cooling tower shell on its dynamic characteristics. The cooling tower is supported by I-type columns and ${\Lambda}$-type columns supports having the different inclination angles. Relevant comparisons of the dynamic response of the structural system at the base level (at the junction of the column and shell), throat level and at the top of the tower have been made. Dynamic response of the cooling tower is found to be significantly sensitive to the change of the inclination of the supporting columns. It is also found that the stiffness of the structure system increases with increase in inclination angle of the supporting columns, resulting in decrease of the period of the structural system. The participation of the stiffness of the tower in structural response of the cooling tower is fund to be dependent of the change in the inclination angle and even in the types of the supporting columns.

• 한국음향학회지
• /
• 제42권1호
• /
• pp.25-31
• /
• 2023

능동소나를 이용하여 수중물체의 속도를 추정하려면 Continuous Wave(CW) 펄스를 이용하는 것이 일반적이나, 수중물체의 속도가 느리고 근거리의 해양에서는 잔향음의 영향으로 수중물체의 속도 추정이 용이하지 않다. 2017년도에 Wang 연구진은 이를 극복하고자 수중물체의 속도에 의한 도플러 변이에 둔감한 광대역 신호인 Hyperbolic Frequency Modulation(HFM) 펄스 두 개를 상반된 스윕방향으로 이용하였다. 두 펄스 간 송신 시간간격과 탐지시간 차이의 변화를 통하여 수중물체 속도 추정이 가능하다는 것을 시뮬레이션으로 제시하였다. 하지만 동일한 대역을 이용하므로 상호상관성에 의해서 수중물체 탐지 성능이 영향을 받을 수 밖에 없다. 상호상관성에 의한 수중물체 탐지 성능저하를 방지하기 위하여 대역이 분리된 상반된 스윕방향의 두 HFM 펄스 이용을 제안한다. 본 논문에서는 상반된 스윕방향의 두 대역 HFM을 이용하여 수중물체의 시선속도 추정에 관한 이론을 도출하였고, 펄스길이와 대역폭이 1 s와 400 Hz인 HFM 펄스로 시뮬레이션을 수행하였다. 제안한 방법을 이용하여 수중물체의 시선속도를 추정하면 약 6 %의 오차로 표적 속도 추정이 가능하다는 것을 시뮬레이션을 통하여 확인하였다.

• 대한토목학회논문집
• /
• 제14권4호
• /
• pp.807-814
• /
• 1994

철근콘크리트 쉘구조물에 대한 현행 설계방법의 타당성을 증명하기 위한 시도로서 Lin과 Scordelis에 의해서 사용되었던 쌍곡 포물선 '안장' 쉘에 대한 설계를 막응력 해석(membrane analysis)에 의해서 구한 응력을 토대로 하여, 보강철근의 설계는 특정부분의 극한거동에 근거를 둔 설계방정식을 이용하여 수행하였다. 비탄성해석을 수행한 결과 행이 97%의 설계극한하중을 지지할 수 있음을 보여주었다. 이는 설계방법이 본 연구에서 해석한 특정 쉘의 실제 극한하중에 대해서 소성이론의 하계정리(Lower bound theorem)가 적용 될 수 있다는 가능성을 보여주고 있으며, 따라서 현행 설계방법의 타당성을 제공하고 있다고 볼 수 있다. 이러한 결론을 일반화하기 위해서는 여러 형태의 철근콘크리트 쉘구조물에 대해서 광범위한 설계와 해석이 행해져야 할 것이다.

• Structural Engineering and Mechanics
• /
• 제44권1호
• /
• pp.85-107
• /
• 2012

The building frame and its foundation along with the soil on which it rests, together constitute a complete structural system. In the conventional analysis, a structure is analysed as an independent frame assuming unyielding supports and the interactive response of soil-foundation is disregarded. This kind of analysis does not provide realistic behaviour and sometimes may cause failure of the structure. Also, the conventional analysis considers infill wall as non-structural elements and ignores its interaction with the bounding frame. In fact, the infill wall provides lateral stiffness and thus plays vital role in resisting the seismic forces. Thus, it is essential to consider its effect especially in case of high rise buildings. In the present research work the building frame, infill wall, isolated column footings (open foundation) and soil mass are considered to act as a single integral compatible structural unit to predict the nonlinear interaction behaviour of the composite system under seismic forces. The coupled isoparametric finite-infinite elements have been used for modelling of the interaction system. The material of the frame, infill and column footings has been assumed to follow perfectly linear elastic relationship whereas the well known hyperbolic soil model is used to account for the nonlinearity of the soil mass.

• 대한기계학회논문집B
• /
• 제22권1호
• /
• pp.1-11
• /
• 1998

For the analysis of phonon heat transfer within short time and spatial scales, conventional macroscopic heat conduction equations with jump boundary conditions are tried and the results are compared to those of equation of phonon radiative transport(EPRT), which is one of microscopic transport equation. In transient state the macroscopic temperatures show far different behavior from EPRT. In steady state the hyperbolic temperatures with temperature jump at the wall from time relaxation model agrees well with EPRT temperatures. Since EPRT is also an approximate form of microscopic transport equation and there are no experimental results to verify the proposed model in this study, we can not conclude whether the approaching method from this study is valid or not. To the authors' knowledge, there are no experimental results available which can be used to test the validity of these models. Such an experiment, while difficult to conduct, would be invaluable.

• 한국지반공학회논문집
• /
• 제16권6호
• /
• pp.79-85
• /
• 2000

본 논문에서는 사질토 지반에 일정기간 계속하여 증가되는 단계별 하중이 작용할 때 발생할수 있는 지반의 밀도화 현상을 hyperbolic model의 매개변수 변화를 고려한 방법으로 유한요소법에 의한 수치적 침하해석에 반영해 주었다. 이를 위해 사질토의 상대밀도별 삼축압축실험을 실시하여 매개변수를 산정하였으며, 이를 토대로 각각의 상대밀도의 변화에 따른 매개변수값을 Lagrange의 다항식 수치보간법으로 프로그램에 반영하였다. 또한 유한요소프로그램 내에서 요소의 체적을 계산하고 체적의 변화를 상대밀도 개념으로 접근함으로서 지반의 밀도화를 프로그램내에서 모사할수 있도록 하였다. 본 연구에서 개발한 해석 프로그램에 의한 지반의 밀도화현상의 모사 결과를 실내 모형기초재하실험에 의하여 비교 분석해 본 결과 기존의 해석 보다 향상된 결과를 나타냄을 알 수 있었다.

• Steel and Composite Structures
• /
• 제48권2호
• /
• pp.145-161
• /
• 2023

This study investigates the influences of porosity on the stability of the orthotropic laminated plates under uniaxial and biaxial loadings based on the hyperbolic shear deformation theory. Three different porosity distribution are considered with three specific functions through the plate thickness. The stability equations of porous orthotropic laminated plates are derived by the virtual work principle. Applying the Galerkin method to partial differential equations, the critical buckling load relation of porous orthotropic laminated plates is obtained. After validating the accuracy of the proposed formulation in accordance with the available literature, a parametric analysis is performed to observe the sensitivity of the critical buckling load to shear deformation, porosity, orthotropy, loading factor, and different geometric properties.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.1009-1018
• /
• 1994

An attempt is made to develop a kind of hybrid numerical method for computations of the thermal stresses during a solidification process. In this algorithm, the phase-change heat transfer analysis is perrformed by a finite volume method(FVM) and the thermal stress analysis in a solidifying body by a finite element method(FEM). The temperatures at the grid points calculated in the heat transfer analysis are transferred to those of gauss points in elements by a bi-cubic surface patch technique for the thermal stress analysis. A hyperbolic-sine constitutive law is used to prescribe the inelastic strain rate of material. Results for the unidirectional solidification process of a pure aluminum are compared with those of others and shows good agreement.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1202-1205
• /
• 2009

Embankment preloading, in conjunction with prefabricated vertical (PV) drains, was used to accelerate consolidation of marine clays in Pusan New Harbour project. UP to eightteen settlement plates were installed at the ground reclamated site under the embankment fill to monitor the preload performance. This analysis is carried out by five settlement prediction methods including the Asaoka, Hyperbolic, Hoshino, and back-analysis method based on optimization. The field settlement data can be analysed by settlement prediction methods to predict the ultimate settlement and the degree of consolidation of the reclaimed land under charge fill. The authors compared with the analyzed results of the methods.

• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.471-483
• /
• 2023

This paper presents an analytical hyperbolic theory based on the refined shear deformation theory for mechanical stability analysis of the simply supported advanced composites plates (exponentially, sigmoidal and power-law graded) under triangular, trapezoidal and uniform uniaxial and biaxial loading. The developed model ensures the boundary condition of the zero transverse stresses at the top and bottom surfaces without using the correction factor as first order shear deformation theory. The mathematical formulation of displacement contains only four unknowns in which the transverse deflection is divided to shear and bending components. The current study includes the effect of the geometric imperfection of the material. The modeling of the micro-void presence in the structure is based on the both true and apparent density formulas in which the porosity will be dense in the mid-plane and zero in the upper and lower surfaces (free surface) according to a logarithmic function. The analytical solutions of the uniaxial and biaxial critical buckling load are determined by solving the differential equilibrium equations of the system with the help of the Navier's method. The correctness and the effectiveness of the proposed HyRPT is confirmed by comparing the results with those found in the open literature which shows the high performance of this model to predict the stability characteristics of the FG structures employed in various fields. Several parametric analyses are performed to extract the most influenced parameters on the mechanical stability of this type of advanced composites plates.