• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.439-439
• /
• 2012

태양광 발전은 발전 셀의 특성상 태양광의 일사량, 태양과 셀 단면이 이루는 각도에 따라서 발전량의 차이를 가져온다. 실리콘 태양전지의 전면 texturing은 입사광의 반사율을 크게 감소시키고, 태양전지 내에서 빛의 통과길이를 증가시켜 태양전지 내의 흡수하는 빛의 양을 증가 시키는 역할을 한다. 따라서 전면 texturing은 단락전류를 증대시키는 효과를 가지고 온다. 일반적으로 texturing은 alkaline etching (WET) 공정과 reactive ion etching (RIE) 공정이 사용된다. 그리고 다결정 실리콘 태양전지의 경우에는 재료의 결정방향에 따라 식각이 되어지는 WET 공정의 경우 texturing 모양을 제어할 수 없어 효과적이지 못하는 결과를 가지고 온다. 본 연구에서는 Electroluminescence을 측정하여 RIE, WET 공정을 사용하여 만든 texturing 구조의 다결정 태양전지의 Microcrack 및 Defect, Electrode Failure, Hot spot등을 검출하였으며, ${\mu}$-PCD 측정 결과와 비교 분석하여 Micro carrier life time을 유추하여 계산하였다. 또한 반사율을 측정해본 결과 WET 공정 대비 RIE의 경우 단파장영역에서 반사율이 크게 감소하여, 상대적으로 높은 External quantum efficiency (EQE)가 측정되었다. 이는 Jsc를 증가시켜, 태양전지의 효율이 증가되는 결과를 얻을 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.734-736
• /
• 2012

Cadmium telluride (CdTe) films have been prepared on Corning 7059 glass, molybdenum (Mo), and polyimide (PI) substrates by r.f. magnetron sputtering technique. The influence of the sputter pressure on the structural and optical properties of these films was evaluated. In addition, a comparison of the properties of the films deposited on fferent substrates was performed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.9
• /
• pp.1276-1283
• /
• 2002

Recently, HSDI (High Speed Direct Injection) diesel engine has been spotlighted as a next generation engine because it has a good potential for high thermal efficiency and fuel economy. This study was carried out to investigate the in-cylinder flow characteristics generated in a 4-valve small diesel cylinder head with a tangential and helical intake port. The flow characteristics such as coefficient of flow rate(Cf), swirl ratio (Rs), and mass flow rate (ms) were measured in the steady flow test rig using the impulse swirl meter and the analysis of in-cylinder flow field was conducted by experiment using the PIV and calculation using the commercial CFD code. As the results from steady flow test indicate, the mass flow rate of the cylinder head with a short distance between the two intake ports is increased over 13% than that of the other head. However, the non-dimensional swirl ratio is decreased approximately 15%. From in-cylinder flow characteristics obtained by PIV and CFD calculation, we found that the swirl center was eccentric from the cylinder center and the velocity distribution became uniform near the TDC. In addition, the results of the calculation are good agreement with the experimental results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.887-894
• /
• 2016

The thermal control device using solid-liquid phase change material (PCM) is designed, manufactured, and experimented in thermal environment chamber. The n-Hexadecane is selected as a PCM and its melting point is placed within the component working temperature range. The PCM container is made of Al6061 and has the thermal spreading fins inside. To simulate the working condition for on-orbit satellite the heat pipes are used to connect the heater and radiator and the PCM thermal control device (PCMTD) is installed at the middle portion of heat pipes. The thermal buffer mass (TBM), which is same configuration and volume with PCMTD, is also manufactured to compare the thermal control performance. As a result, the PCMTD is not only more efficient than TBM in their temperature control features but both mass and power of compensation heater are reduced.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.185.2-185.2
• /
• 2016

The plasma density is an essential plasma parameter describing plasma physics. Furthermore, it affects the throughput and uniformity of plasma processing (etching, deposition, ashing, etc). Therefore, a novel technique for plasma density measurement has been attracting considerable attention. Microwave probe is a promising diagnostic technique. Various type of cutoff, hairpin, impedance, transmission, and absorption probes have been developed and investigated. Recently, based on the basic type of probes, modified flat probe (curling and multipole probes), have been developing for in situ processing plasma monitoring. There is a need for comparative study between the probes. It can give some hints on choosing the reliable probe and application of the probes. In this presentation, we make attempt of numerical study of different kinds of microwave probes. Characteristics of frequency spectrum from probes were analyzed by using three-dimensional electromagnetic simulation. The plasma density, obtained from the spectrum, was compared with simulation input plasma density. The different microwave probe behavior with changes of plasma density, sheath and pressure were found. To confirm the result experimentally, we performed the comparative experiment between cutoff and hairpin probes. The sheath and collision effects are corrected for each probe. The results were reasonably interpreted based on the above simulation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.509-517
• /
• 2001

Full-search algorithm requires large amount of computation which causes time delay or very complex hardware architecture for real time implementation. In this paper, we propose a fast motion estimator based on bit-plane matching, which reduce the computational complexity and the hardware cost. In the proposed motion estimator, the conventional motion estimation algorithms are applied to the binary images directly extracted from the video sequence. Furthermore, in the proposed VLSI motion estimator, we employ a Pair of processing cores that calculate the motion vector continuously By controlling the data flow in a systolic fashion using the internal shift registers in the processing cores, we avoid using SRAM (local memory) so that we remove the time overhead for accessing the local memory and adopt lower-cost fabrication technology. We modeled and tested the proposed motion estimator in VHDL, and then synthesized the whole system which has been integrated in a 0.6-$\mu$m triple-metal CMOS chip of size 8.15 X 10.84$\textrm{mm}^2$.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.409-411
• /
• 2003

A species of facultative photo-organotrophic, purple, non-sulfur bacterium was isolated from the west coast and the south coast 47 area of Korea at 2001 September. Separated 13 samples of changes with red color under $28{\sim}32\;^{\circ}C$, 3000 lux, anaerobe conditions for 7 days cultivated in Basal medium. For a pure isolation from 13 samples it used agar-shake tube method (0.4 % agar) and it separated 5 strains through 13-repetition test. The RAPD(Random Amplified Polymorphic DNA)-PCR result of strains (EGH-9, EGH-13, EGH-23, EGH-24, EGH-30) that EGH-24 and EGH-30 was same strain. For wastewater biodegradation test that 4 isolation strains cultivated in synthesis wastewater in 7 days. EGH-24 was high 63000 mg/L (CODcr) to 43400 mg/L (CODcr). EGH-24 was selected with efficient wast water treated strain. Based on the results obtained from morphology, nutrient requirements, major bacteriochlorophyll content, 165-rDNA phylogenetic analysis, this strain may be identified as a new strain of the genus Rhodobacter and named Rhodobacter sp. EGH-24.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.180-184
• /
• 2003

Several bacteria and yeasts were isolated from soil and characterized for the development of functional probiotics which can be used as a livestock feed additive. From the soil, the microbial strains which have acid/bovine resistance, antibiotics resistance and high stability, were isolated. Most strains selected were very tolerable against acids and very stable in a broad range of pH. Some strains could survive 100% at pH 2.5. The growth of the strains was not affected in the presence of bile acid, pathogenic E. coli and several antibiotics such as tetracycline, nisin, kanamycin, streptomycin, ampicillin. Acidogenic capability test showed that all the strains can produce acids. The hydrolytic activities were analysed for amylase, protease, lipase and cellulase to decompose various organic compounds. All the strains were found to be gram negative, round type, non-kinetic and the color is yellow or white.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.4
• /
• pp.316-320
• /
• 1999

The purpose of this research was to estimate dewatering characteristics of generating water treatment plant by dewatering velocity, suitable polymer and mixing condition. Zeta potential of sludge in storage tank was negative and in case of adding cation, anion and nonion polymer for sludge conditioning, specific resistance coefficients of conditioned sludge were similar at zeta potential -5㎷. But above zeta potential -15㎷, canon polymer was more effective than others for reduction of specific resistance coefficients. Using of cation acrylate polymer showed better dewatering coefficients than cation methacrylate polymer.

• Food Science of Animal Resources
• /
• v.35 no.2
• /
• pp.156-163
• /
• 2015

The effects of low molecular-weight collagen peptides derived from porcine skin were investigated on the physicochemical and sensorial properties of chocolate ice cream. Collagen peptides less than 1 kDa in weight were obtained by sub-critical water hydrolysis at a temperature of $300^{\circ}C$ and a pressure of 80 bar. Ice cream was then prepared with gelatin powder and porcine skin hydrolysate (PSH) stabilizers mixed at seven different ratios (for a total of 0.5 wt%). There was no significant difference in color between the resulting ice cream mixtures. The increase in apparent viscosity and shear thinning of the ice cream was more moderate with PSH added than with gelatin. Moreover, the samples containing more than 0.2 wt% PSH had enhanced melting resistance, while the mixture with 0.2 wt% PSH had the lowest storage modulus at $-20^{\circ}C$ and the second highest loss modulus at 10℃, indicating that this combination of hydrocolloids leads to relatively softer and creamier chocolate ice cream. Among the seven types of ice creams tested, the mixture with 0.2 wt% PSH and 0.3 wt% gelatin had the best physicochemical properties. However, in sensory evaluations, the samples containing PSH had lower chocolate flavor scores and higher off-flavor scores than the sample prepared with just 0.5 wt% gelatin due to the strong off-flavor of PSH.