• Archives of Pharmacal Research
• /
• 제26권11호
• /
• pp.973-978
• /
• 2003

A polymeric film composed of Carbopol, Poloxamer and hydroxypropyl methylcellulose was prepared to develop a buccal patch and the effects of composition of the film on adhesion time, swelling ratio, and dissolution of the film were studied. The effects of plasticizers or penetration enhancers on the release of triamcinolone acetonide (TAA) were also studied. The hydrogen bonding between Carbopol and Poloxamer played important role in reducing swelling ratio and dissolution rate of polymer film and increasing adhesion time. The swelling ratio of the composite film was significantly reduced and the adhesion time was increased when compared with Carbopol film. As the ratio of Poloxamer to hydroxypropyl methylcellulose increased from 0/66 to 33/33, the release rate of TAA decreased. However, no further significant decrease of release rate was observed beyond the ratio of 33/33. The release rate of TAA in the polymeric film containing polyethylene glycol 400, a plasticizer, showed the highest release rate followed by triethyl citrate, and castor oil. The release rate of TAA from the polymeric film containing permeation enhancers was slower than that from the control without enhancers. Therefore, these observations indicated that a preparation of a buccal patch is feasible with the polymeric film composed of Cabopol, Poloxamer and hydropropyl methylcellulose.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.297.1-297.1
• /
• 2003

Organic solvent-based enteric coating technology using hydroxypropyl methylcellulose phthalate (HPMCP) has been developed for many years due to low water solubility of HPMCP. In this work, aqueous HPMCP nanoparticles (HPMCP-NPs) were prepared by neutralization emulsification method using HPMCP powder and ammonium hydroxide (NH40H) in the absence of any organic solvent and emulsifier. (omitted)

• 폴리머
• /
• 제30권5호
• /
• pp.437-444
• /
• 2006

Hydroxypropyl methylcellulose phthalate (HPMCP)에 isophorone diisocyanate (IPDI)와 2-hydroxyethyl methacrylate (HEMA)를 순차적으로 반응하여 우레탄 그룹을 형성하고 HPMCP에 비닐 그룹을 도입하여 반응형(reactive) HPMCP를 합성하였다. 제조된 반응형의 HPMCP와 반응전의 순수한 HPMCP의 분자량, 산가, 임계 미셀 농도(CMC) 등을 측정하였으며, 스티렌의 유화 중합에 고분자 유화제로서 도입하였다. HPMCP의 함량을 단량체인 스티렌 대비로 6, 9, 12, 18, 24 wt%로 도입하여 HPMCP 혼성 폴리스티렌 나노입자를 제조하고, 최대 중합 속도($R_{p,max}$), 입자당 평균라디칼 개수(n), 입자 크기 분포 등을 분석하였다. 또한 제조된 HPMCP 혼성 폴리스티렌 나노입자의 모폴로지를 TEM으로 분석하여 core-shell 구조임을 확인하였으며, TGA를 이용하여 열적안정성의 변화를 분석하였다. 반응형 HPMCP는 순수 HPMCP와는 달리 HEMA의 비닐 그룹으로 인해 높은 중합속도와 작은 입자 크기, 높은 표 값을 나타내었으며, 높은 젤 함량을 나타내었다.

• 접착 및 계면
• /
• 제24권2호
• /
• pp.54-59
• /
• 2023

은 나노와이어 기반 투명전극은 우수한 전도도와 투과도, 유연성을 가지고 있어 ITO 기반의 유연전극을 대체할 수 있는 차세대 유연투명전극으로 각광받고 있다. 그러나 은 나노와이어 기반 투명전극 제작에 사용되는 은 나노와이어 용액에 대한 이해가 부족하여 전자소자 응용 시 소자의 비정상적인 작동이나 전극 필름의 박리 문제가 종종 발생하곤 한다. 본 연구에서는 은 나노와이어 용액에 대한 이해를 높이고자 은 나노와이어 용액에 사용되는 첨가제 중 하나인 hydroxypropyl methylcellulose 접착력 증진제에 대한 연구를 진행하였으며, 접착력 증진제를 첨가함에 따라 은 나노와이어 용액의 특성이 어떻게 변화되고 이러한 용액을 사용하여 제작된 은 나노와이어 필름의 특성이 어떻게 변화되는지 연구하였다. 용액의 특성으로는 극성성분의 표면장력과 분산 성분의 표면장력이 측정되었으며, 필름 특성으로는 표면 에너지와 표면 형상, 은 나노와이어 밀도, 면저항 등이 분석되었다.

• Journal of Pharmaceutical Investigation
• /
• 제18권3호
• /
• pp.157-160
• /
• 1988

• Journal of Pharmaceutical Investigation
• /
• 제18권3호
• /
• pp.147-155
• /
• 1988

• International Journal of Industrial Entomology and Biomaterials
• /
• 제19권1호
• /
• pp.181-185
• /
• 2009

In this paper, the regenerated silk fibroin (SF)/hydroxypropyl methylcellulose (HPMC) blend filaments were prepared by wet spinning and the effect of HPMC concentration on the post drawing and morphology of blend filaments was elucidated. The result of maximum draw ratio indicated that the wet spinnability of wet spun SF / HPMC was improved with increasing HPMC concentration until 8% and remained constant after that concentration. The SEM observation revealed that the enhanced wet spinnability of blend filaments was strongly related to the morphological change by increasing HPMC concentration. Regardless of HPMC concentration, as SF content was reduced, the wet spinnability of blend film decreased resulting in reduced maximum draw ratio. It was also found by SEM observation that the cross section of blend filament deviated from circularity with an increase of HPMC content.

• Archives of Pharmacal Research
• /
• 제28권3호
• /
• pp.364-369
• /
• 2005

HPMC (Hydroxypropyl methylcellulose) was chemically modified, using maleic anhydrides, to obtain pH-sensitive HPMCAM (Hydroxypropyl methylcellulose acetate maleate) polymers for use as novel duodenum-specific coating agents. The pharmaceutical properties of HPMCAM, such as film forming, acid values, pH-sensitive values, water vapor permeability, tensile strength and Tg, were investigated, and found to show good film forming properties. The pH­sensitive values were 3.0 to 3.7. In vitro results demonstrate that HPMCAM could completely suppress drug release within 2h in a simulated gastric fluid (pH 1.2) and rapidly release the drug in a simulated pathological duodenal fluid (pH 3.4). These results indicate that HPMCAM might be a useful material for a duodenum-specific drug delivery system.

• Journal of Pharmaceutical Investigation
• /
• 제23권4호
• /
• pp.213-216
• /
• 1993

${\kappa}-Carrageenan$, an anionic polysaccharide, was employed in tablet formulations and its function as a drug release sustaining agent was investigated. Tablets composed of ${\kappa}-carrageenan$ and hydroxypropyl methylcellulose were fabricated by using direct compression method. Lactose and sodium alginate were utilized as controls for ${\kappa}-carrageenan$. Drug release experiments performed at pHs 1.2 and 7.4 revealed that ${\kappa}-carrageenan$ retains pH-dependent sustained release effects due to its anionic characteristics. Also, the ionic interaction between ${\kappa}-carrageenan$ and drugs exerted significant affects on drug release kinetics. ${\kappa}-Carrageenan$ was found out to be a useful additive for sustained release tablet formulations.

• 한국고분자학회지:고분자과학과기술
• /
• 제18권6호
• /
• pp.549-553
• /
• 2007