• Journal of the Korean GEO-environmental Society
• /
• v.14 no.9
• /
• pp.57-65
• /
• 2013

Carbonate sands can be crushed under low confining pressure to achieve high compressibility. So particle crushing has significant influence on characteristics of strength and deformation. Trial embankment and hydrotest are conducted on Sabkha layer, consisting of carbonate sand to build tank structure. In this paper the settlement behavior was analyzed from each test. Particle crushing happened from 80 to 170kPa stress under compression test, and calcium was detected from chemical test. The test result came out Sabkha soil was very weak and easy to be crushing. About trial embankment test, particle crushing was not happen, and then extinction of pore water pressure and settlements were finished just during 2 days. On the other hand, the long-term settlement was happened in hydrotest. So the two test results did not correspond to each other. If loading stress is higher than yielding stress, instant settlement and secondary compression settlement are happened as a result of the particle crushing.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.8 no.1
• /
• pp.12-21
• /
• 1988

The behaviour of pressure vessel made of SS41 steel was investigated during hydrotest. AE tests were carried out for the vessels in as-manufactured, V-notched and weld-cracked state using microcomputer-based AE instrumentation. The following results were obtained: 1) In the case of source location using cylindrical program, to minimize the error of source location, the difference of max. Delta T values measured from each sensor should be kept as small as possible. 2) When crack grew, AE event rate increased continuously but AE event from the inclusions occurred intermittently, so by analyzing event rate, the source of AE could be derived. 3) From the spot welding part of supporter, many events with low energy occurred independent of Kaiser effect, which could be confirmed by analyzing energy parameter. 4) The b-value from the tensile specimen of was lower than that from normal specimen and the b-value from crack propagation was lower than that from deformation, so by analyzing peak amplitude distribution, the source mechanism could be derived from the b-value.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.68-72
• /
• 2001

Two different methods of free span analysis of offshore pipelines by DnV codes were introduced and compared in order to calculate the allowable free span lengths of the offshore pipelines. The allowable span lengths of the offshore pipelines for installation, hydrotest and operation conditions by static and dynamic span analysis were determined. Static analysis was performed by ASME codes and dynamic span analysis was performed by both 1981 DnV code. Comparison of two codes were carried out. A new design procedure to calculate the allowable span lengths was developed with new DnV code.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.1
• /
• pp.39-47
• /
• 1994

원자력발전소의 상온수압시험에는 여러가지 목적이 있으며 그 중에서 가장 중요한 것 중 하나는 원전 주요 기기로부터의 누설여부를 알아내는 것이다. 동 시험에서 누설 여부를 알아내기 위해 현재 국내에서는 미국 규격에 따라 육안검사를 수행하고 있으나 프랑스의 경우, 음향방출 누설시험과 육안검사를 수행토록 하고 있다. 저자는 1992년과 1993년 중국 광동 원전 1, 2호기의 가동전검사에 참여하여 프랑스의 RSEM 규격에 따라 실시된 상온수압시험시의 음향방출 누설시험과 누설 육안검사에 대하여 기술 지원 업무를 수행하였다. 동시험에서는 시험 최고 압력인 228bar에서는 음향방출 누설 감시시험과 누설 육안검사를, 감압단계인 155bar 에서는 누설 육안검사를 수행하였다. 본고에서는 동 규격에 따라 최초로 수행된 중국 광동 원전 가동전검사 수압시험시의 음향방출에 의한 누설감시와 누설 육안검사에 대해 검사 기술, 검사 방법, 검사 절차, 그리고 검사 대상부위 등을 기술하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.3 no.1
• /
• pp.12-18
• /
• 1983

This paper describes the procedures and results of an acoustic emission testing performed during hydrotest of spherical pressure vessel for propane storage. A computer based multi-channel real time monitoring and source location analysis AET-4900 system was used for AE testing. The vessel was extremely quiet throughout the entire test run and especially 6 to $14.5kg/cm^{2}$, it is normal operating pressure range. After exceeding $14.5kg/cm^{2}$, one of the 20 sections showed the most event in any one section 11 total but there were scattered at different locations. In order to confirm the events seen in horizontal weld line of that section, proof testing was performed with ultrasonics and radiography.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.247-256
• /
• 2013

The carbonate sands of the Sabkha layer in the Middle East have very low shear strength. Therefore, instant settlement and time-dependent secondary settlement occur when inner voids are exposed, as in the case of particle crushing. We analyzed settlement of the Sabkha layer under a large-scale foundation by hydrotesting, and compared the field test results with the results of laboratory tests. With ongoing particle crushing, we observed the following stress-strain behaviors: strain-hardening (Sabkha GL-1.5 m), strain-perfect (Sabkha GL-7.0 m), and strain-softening (Sabkha GL-7.5 m). General shear failure occurred most frequently in dense sand and firm ground. Although the stress-strain behavior of Sabkha layer carbonate sand that of strain-softening, the particle crushing strength was low compared with the strain-hardening and strain-perfect behaviors. The stress-strain behaviors differ between carbonate sand and quartz sand. If the relative density of quartz sand is increased, the shear strength is also increased. Continuous secondary compression settlement occurred during the hydrotests, after the dissipation of porewater pressure. Particle crushing strength is relatively low in the Sabkha layer and its stress-strain behavior is strain-softening or strain-perfect. The particle crushing effect is dominant factor affecting foundation settlement in the Sabkha layer.