• 토지주택연구
• /
• 제13권1호
• /
• pp.141-150
• /
• 2022

국내 대규모 지진 이후 구조물의 내진에 대한 연구 필요성이 커짐에 따라 행정안전부에서는 기존의 내진설계기준 공통적용사항을 개정하여 국가내진성능 목표치를 상향하였으며 새로 개정된 내진설계기준의 성능목표치에 대한 연구가 필요하게 되었다. 이에 본 논문에서는 실제 노후화된 Test-Bed의 댐 제체와 내부에 매립되어 있는 수압철관과 유체를 여러 변수를 도입하여 3차원 유한요소법으로 모델링 하였으며 수압철관 내부 유체의 동수압으로 인한 거동을 분석하고 개정된 현행 내진설계 기준법에 부합하는 지진파에 대한 댐 제체와 수압철관의 안전성을 확인하였다. 3차원 유한요소해석결과 수압철관의 수충격에 의한 응력변화가 매우 작았으며 이를 통해 지진상황에서 수충격 보다 동수압의 영향이 더 큰 것을 확인할 수 있었다. 동수압이 SPH 형태인 경우 지진동으로 인한 유체의 거동과 응력 발생 위치를 유효하게 나타낼 수 있으며 취약부 분석에 더욱 용이할 것으로 분석되었다. 부식을 고려한 해석결과 수압철관이 제체의 매립되어 있기 때문에 응력 분산의 정도가 작아져 강재 항복응력의 1% 이하로 매우 작은 응력결과를 보였다. 또한 콘크리트 댐 제체의 상류 유입부의 미소 인장균열 발생 가능성이 있으나 수압철관의 응력증가에 큰 영향을 끼치지 않는 것으로 나타났으며 개정된 유효지반가속도의 지진상황에서 안전한 것으로 판단된다.

• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.499-513
• /
• 2018

One of the major problems in glass fiber reinforced epoxy (GFRE) composite pipes is the durability under water absorption. This condition is generally recognized to cause degradations in strength and mechanical properties. Therefore, there is a need for an intelligent system for detecting the absorption rate and computing the mass of water absorption (M%) as a function of absorption time (t). The present work represents a new non-destructive evaluation (NDE) technique for detecting the water absorption rate by evaluating the dielectric properties of glass fiber and epoxy resin composite pipes subjected to internal hydrostatic pressure at room temperature. The variation in the dielectric signatures is employed to design an electrical capacitance sensor (ECS) with high sensitivity to detect such defects. ECS consists of twelve electrodes mounted on the outer surface of the pipe. Radius-electrode ratio is defined as the ratio of inner and outer radius of pipe. A finite element (FE) simulation model is developed to measure the capacitance values and node potential distribution of ECS electrodes on the basis of water absorption rate in the pipe material as a function of absorption time. The arrangements for positioning12-electrode sensor parameters such as capacitance, capacitance change and change rate of capacitance are analyzed by ANSYS and MATLAB to plot the mass of water absorption curve against absorption time (t). An analytical model based on a Fickian diffusion model is conducted to predict the saturation level of water absorption ($M_S$) from the obtained mass of water absorption curve. The FE results are in excellent agreement with the analytical results and experimental results available in the literature, thus, validating the accuracy and reliability of the proposed expert system.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.74-80
• /
• 2009

The membrane of the LNG carriers consists of thin strips of INVAR(Fe-36%Ni) steel plates, and the junction between INVAR strips is fabricated by welding. Thousands of the raised edge joints, regularly spaced, are located around all the side of the tank corner near the transverse bulkhead, and TIG welding is manually made on the top of the raised edges. Since the thickness of all the laminated edge plies is extremely thin and the weld position is under a bad accessibility, highly skilled workers are required to perform welding relatively for a long welding time. An alternative scheme for the corner membrane fabrication is proposed in the study to improve the installation workability and thus productivity. The scheme replaces the welded edges with the preformed corrugation ones. A panel strip with regularly-spaced corrugations is installed at the corner instead of the individual flat strip of which edge is vertically raised to be welded with the adjacent strip. In the study, a series of the evaluation on the corrugated edge members was performed to assess the applicability to the real LNG carrier fabrication. Opening displacement at the raised edge was experimentally examined. Elastic stiffness regressed from the displacement was nearly same in both edge types. Edge displacement and local stresses were calculated under hydrostatic pressure and temperature change due to liquefied cargo. Fatigue test was performed on both corrugated and welded edge specimens consisting of two or five plies of invar strips. Fatigue strength of the corrugated specimens was not less than that of the welded specimens.

• 한국응용과학기술학회지
• /
• 제8권1호
• /
• pp.9-20
• /
• 1991

In the preparation of acrylic water repellent(EDLWC). quaternized 2-diethylarrunoethylmethacrylate-stearylmethacrylate copolymer (DSACC) and quaternized 1-Iaurovlbis(aminoethyl)-2-dodecylimidazoline(LDDIC) were selected as a basic resin and the improving agent such as softening effect and hydrostatic pressure of the water repellent. EDLWC was prepared by blending waxes and emulsifier for waxes with various ratio to DSACC and LDDIC. As the results of the measurement of water repellency, washable, tear strength and crease recovery to polyester-cotton(P/C) blended fabrics treated with EDLWC only or addition of textile finishing resin, the physical properties were increased. Sodium acetate was the most effective catalyst in the water repellency among the various kinds of catalyst. and the reasonable concentration of the catalyst was 1. 4 wt%. EDLWC was confirmed as durable water repellent with the results of making little difference of water repellency as ${\pm}5$ point after and before washing. The reaction mechanism between P/C blended fabrics and EDLWC in the presence of catalyst was proposed. And also, the longitudinal view of the P/C blended fabrics treated with water repellent was observed with scanning electron microscope.

• 한국가스학회지
• /
• 제5권4호
• /
• pp.49-55
• /
• 2001

본 연구에서는 $9\%$ 니켈강재로 제작된 완전 방호식 내부탱크 구조물의 설계 안전성 문제를 유한요소법으로 해석하고자 한다. 내부탱크 구조물에 대한 수치적 해석결과에 의하면 내부탱크에 부착된 톱가더와 스티프너는 내부탱크의 변형율과 응력을 제어하는 중요한 역할을 하고 있다. 내부탱크에 작용하는 여러 하중에서 초저온 액체에 의한 유체정압은 $-162^{\circ}C$의 초저온 온도하중보다 더 큰 영향을 미치고 있음을 알 수 있다. 그러나, 내부탱크에 작용하는 자중량 좌굴하중에 의한 영향은 내부탱크 구조물이 충분한 강도로 이미 설계되어 있으므로 대단히 자게 나타났지만, 특히 톱가더나 스티프너의 역할은 미미한 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.309-316
• /
• 2011

일반적으로 카누는 목재나 FRP 등으로 제작된다. 그러나 소비자들은 기존의 재료에 비하여 염가이면서 친환경 재료를 선호한다. 특히, 선진국에서는 일부 선박에 대하여 FRP 선체 제조를 금지하는 법안을 발표하고 이에 따른 국제협약을 제정하였다. 폴리에틸렌은 식료품 용기나 의료용 용기로 널리 사용되는 재료로서 리사이클 가능한 재료이다. 본 연구에서는 카누 선체 재료로 폴리에틸렌으로 선정하였으며 선형설계는 상용 선형 설계 프로그램인 3D Boat Design을 이용하여 수행하였다. 카누 구조하중은 우선 ANSYS CFX R12.1을 이용하여 선체에 작용되는 압력 분포를 구하고 이것을 ANSYS WORKBENCH R12.1로 넘겨 선체 압력 하중과 패들러 하중을 동시에 고려하였다. 카누 각 치수를 설계변수화하여 응력과 무게를 최소화하는 최적화 과정을 반응표면방법과 만족도 함수를 이용하여 수행하였다. 개발된 카누는 운항시험에서 직진성이나 안정성은 우수하나 운반성과 선회성 및 속도는 보통인 것으로 판단된다.

• 한국정밀공학회지
• /
• 제29권4호
• /
• pp.461-468
• /
• 2012

Silo is a warehouse for storing granular materials such as grain, cement, petroleum compound and coal. When compared to other warehouses, the silo can use space efficiently. The coal silo are consists of silo, tunnel and extractor. Of these, there are not sufficient study and design data on tunnel. It depends heavily upon trial and error method by field engineers with several years of experience. Recently, silos are constructed with a large size, and tunnel becomes to be in danger of severe cracking and collapse by a huge load of coal. So it is necessary to analyze structural safety for tunnel. In this study, the problems of the tunnel are analyzed by field data, and reinforcement of structural weak area using FE analysis has been carried out to design the tunnel satisfying structural safety. From FE Analysis, the reinforced model which does not exceed the yield strength of the material has been proposed.

• 동의생리병리학회지
• /
• 제27권4호
• /
• pp.367-373
• /
• 2013

The purpose of this study was to analyze the patent application trend in the processing technology for medicinal herbs. Recently, in processing technology for medicinal herbs, experimental researches have frequently been published through papers in journals. However, the research results about the patent area were fewer than the others. We tried to analyze the patent application trend in nonthermal processing technologies for medicinal herbs by country as Korea, Japan, U.S.A. and Europe. The detailed technologies consisted of pulsed electric field, oscillatory magnetic field, intense pulsed light, ultrasonification, high hydrostatic pressure, microwave, radiation, Ohmic heating, and supercritical extraction. As a result we found that patents of nonthermal processing technologies has been growing steadily in quantity from 1980s and growing quickly since 2000s. The number of patent in Korea is larger than others as making up 70% in that whole. The number of patent in ultrasonification field was larger than others in portfolio analysis. Patent application trend in nonthermal processing technologies for ingestion occupies high share compared to other usage applications. In conclusion, patent trends of nonthermal processing technologies for medicinal herbs belong to the period in the development.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.253-265
• /
• 1993

본 연구는 Lade에 의해서 제안된 비선형구성모델을 이용하여 지반거동을 해석하기 위한 수치해석 방법을 제시하고자 한것이다. 그 첫 시도로서 축대칭조건과 평면변형율조건의 비선형 경계치 문제를 해석하기 위하여 변위법을 이용한 유한요소 프로그램을 개발하였다. 모델의 매개변수를 결정하기 위한 시험과 모형기초지반의 시험재료는 백마강모래를 사용하였다. 그리고 실내시험 자료로 부터 비선형구성모델 의 매개변수를 결정할 때 컴퓨터 프로그램을 개발하여 사용하였다. 구성 모델의 정도를 검증하기 위하여 개발된 유한요소프로그램을 사용한 예측결과를 매개변수 결정에 사용된 실험 결과뿐만 아니라 결정에 사용되지 아니한 실험결과와도 비교하였다. 검증에 사용된 시험은 다음과 같다 ; (1) 등방압축팽창시험, (2) 구속압력을 달리한 배수삼축압축시험 (3) 모형기초지반의 재하시험, 이상의 시험과 수치해석결과를 비교하여 비선형구성모델과 유한요소해석프로그램의 정도를 확인하고 평면변형율조건에 있는 2차원모형기초지반의 거동 특성을 검토하였다.

• 한국응용과학기술학회지
• /
• 제11권2호
• /
• pp.69-74
• /
• 1994

Durable softening water repellents for nylon fiber were synthesized, using two compounds: quaternized octadecyl methacrylate-2-diethylaminoethyl methacrylate copolymer as a mother resin of water repellent and quaternized fatty carbamide for improving softness and hydrostatic pressure, of which syntheses were studied in the previous papers. They were blended with waxes and emulsifiers in a variety of ratios and synthesized into water repellent PADWC, and it was nylon taffeta treated with and without textile finishing resin. The synthesized water repellents can be used either or without resin. The optimum curing temperature was 150 to 160$^{\circ}C$ and the optimum concentration was 3 to 5wt%. In the independent and conjunct treatment, the water repellency of nylon taffeta samples have no remarkable changes between initial value and that after three times washing, so these prove that the synthesized compounds are durable water repellent. The water repellency of PADWC-3 and -4 were around 90. Also, comparison of crease recovery and tear strength after repelling treatment showed that the synthesized water repellents have a very high softening effect.