• Environmental Analysis Health and Toxicology
• /
• v.20 no.4 s.51
• /
• pp.351-358
• /
• 2005

The n -octanol/water partition coefficient (Pow) is one of the most important parameters employed for estimating a chemiral's environmental fate and toxicity. The shake-flask method, one direct experimental method, i.1 prone to experimental artifacts for highly hydrophobic compounds. Thus, a valid method for direct determination of the Pow of highly hydrophobic compounds is needed. The slow -stirring method has been demonstrated to provide reliable log Pow data to log Pow greater than 5. This study was performed to evaluate the accuracy of slow- stirring experiment for determination of log Pow, particularly for highly hydrophobic compounds. 1, 2, 3, 4-tetrachlorobenzene, hexachlorobezene, 2, 2', 3, 3', 5, 5', 6, 6'-octachlorobiphenyl, decachlorobiphenyl, and p, p'-DDT (4.5$\times$0.02, 5.41$\times$0.06, 7.26$\times$0.04, 7.87$\times$0.10, and 6.03$\times$0.06, respectively. The octanol/water partition coefficient by the slow-stirring method were very similar to the literature values. These results indicate that the slow- stirring method allows for reliable determination of log Pow of highly hydrophobic chemicals.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.914-919
• /
• 1997

On the basis of theory of Bratsch's electronegativity equalization, the electronegativity equalization, the group electronegativities and the group partial charges for anionic and nonionic surfactants could be calculated by using Pauling's electronegativity parameters. From calculated results, we have investigated how CMC, hydrophilic and hydrophobic groups, group partial charge, electronegativity of hydrophilic and hydrophobic groups, structural stability of micelle for anionic and nonionic surfactants are related. It was fround that CMC depends upon group partial charge and group electronegativity of hydrophilic and hydrophobic groups of surfactants. For the anionic surfactants, negative partial charge in hydrophobic group is delocalized as the carbon number in hydrophobic group increase. So negative partial charge of hydrophilic group has very large electronegativity that is decreased. And CMC decreases as hydration ability of hydrophilic groups which decreases relatively. For the nonionic surfactant, partial charge and electronegativity in hydrophobic group increases with the increment of carbon number in hydrophobic group. And CMC decreases because electronegativity of hydrophilic group is decreased with the increment of electronegativity of hydrophilic group. However, with the increase of repeating units in hydrophilic group, the negative partial charge of hydrophilic group increases. So CMC increases because surfactants hydrate rather than form micelles in aqueous solution by the increase of hydration ability.

• Journal of Photoscience
• /
• v.11 no.1
• /
• pp.29-33
• /
• 2004

The mechanism of interaction of cyanocobalamin (CB) with bovine serum albumin (BSA) has been investigated by spectrofluorometric and circular dichroism methods. Association constant for the CB-BSA system showed that the interaction is non-covalent in nature. Binding studies in the presence of an hydrophobic probe, 8-anilino-l-naphthalene sulphonic acid, sodium salt (ANS) showed that there is hydrophobic interaction between CB and ANS and they do not share common sites in BSA. Stern-Volmer analysis of fluorescence quenching data showed that the fraction of fluorophore (protein) accessible to the quencher (CB) was close to unity indicating thereby that both tryptophan residues of BSA are involved in drug-protein interaction. The rate constant for quenching, greater than $10^{10}$ $M^{-1}$ $s^{-1}$, indicated that the drug binding site is in close proximity to tryptophan residue of BSA. Thermodynamic parameters obtained from data at different temperatures showed that the binding of CB to BSA involves hydrophobic bonds predominantly. Significant increase in concentration of free drug was observed for CB in presence of paracetamol. Circular dichroism studies revealed the change in helicity of BSA due to binding of CB to BSA.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.493-498
• /
• 2017

This study is a pioneer investigation to enhance the insulation capacity of the conventional aerated concrete using hydrophobic aerogels. As the main test parameters, aerogel content varied from 0% to 40% of the foam volume. Test results showed that the compressive strength of aerated concrete containing aerogels was lower by 17%~34% than that of the conventional aerated concrete. In addition, the effect of the aerogels on reducing thermal conductivity of aerated concrete is insignificant because of the partial condensation and abnormal distribution of the hydrophobic aerogels. Hence, further hydrophilic treatment for the surface of aerogels is recommended to minimize the decrease in compressive strength and enhance the insulation capacity of aerated concrete.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.7
• /
• pp.328-334
• /
• 2002

The DNA chips are devices associating the specific recognition properties of two DNA single strands through hybridization process with the performances of the microtechnology. In the literature, the "Gene chip" or "DNA chip" terminology is employed in a wide way and includes macroarrays and microarrays. Standard definitions are not yet clearly exposed. Generally, the difference between macro and microarray concerns the number of active areas and their size, Macroarrays correspond to devices containing some tens spots of 500$\mu$m or larger in diameter. microarrays concern devices containing thousnads spots of size less than 500$\mu$m. The key technical parameters for evaluating microarray-manufacturing technologies include microarray density and design, biochemical composition and versatility, repreducibility, throughput, quality, cost and ease of prototyping. Here we report, a new method in which minute particles are arranged in a random fashion on a chip pattern using random fluidic self-assembly (RFSA) method by hydrophobic interaction. We intend to improve the stability of the particles at the time of arrangement by establishing a wall on the chip pattern, besides distinction of an individual particle is enabled by giving a tag structure. This study demonstrates the fabrication of a chip pattern, immobilization of DNA to the particles and arrangement of the minute particle groups on the chip pattern by hydrophobic interaction.ophobic interaction.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.174-180
• /
• 2014

A plasma hydrophobic coating on commercial fish feed was conducted to prolong the floating time of feed, thereby enhancing the feed consumption rate and reducing the contamination of water in fish farms. The hydrophobic coating on the fish feed was prepared using an atmospheric-pressure dielectric barrier discharge (DBD) plasma with hexamethyldisiloxane (HMDSO), toluene and n-hexane as the precursors. The effect of the parameters such as input power, precursor type and coating time on the coating performance were examined. The physicochemical properties of the coating layer were analyzed using a Fourier transform infrared (FTIR) spectrometer and a contact angle (CA) analyzer. The water CA increased after the coating preparation, indicating that the surface changed from hydrophilic to hydrophobic. The FTIR characterization revealed that the hydrophobic layer was comprised of functional groups such as $CH_3$, Si-O-Si and Si-C. As a result of the hydrophobic coating, the floating time of the fish feed increased from several seconds to 3 minutes, which suggested that the plasma coating method could be a viable means for practical applications. Compared to the water CA measured as soon as the coating layer was prepared, the 6-day aged sample exhibited a substantial CA increase, confirming the aging effect on the improvement of the hydrophobicity.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.26-29
• /
• 2001

Sorption/desorption Study was conducted to determine desorption-resistance hydrophobic organic compounds in natural soils with low organic carbon content. Sorption/desorption characteristics of chlorobenzene and phenanthrene for both PPI (Petro Processors, Inc. Superfund site) and BM (Bayou Manchac), soils were investigated. Desorption was biphasic including reversible and desorption-resistant compartments. The biphasic sorption parameters indicated the presence of appreciable size of desorption-resistant phase in these soils. A finite maximum capacity of desorption-resistant fraction (equation omitted) was observed after several desorption steps. The apparent organic carbon based Partition coefficient, K(equation omitted) was 10$^{4.92{\pm}0.27}$ for PPI soil and 10$^{4.92{\pm}0.27}$ for BM soil, respectively. The difference in K(equation omitted) was attributed to different characteristics in soil organic matter. The results suggest that desorption-resistance should be considered in remediation and risk assessments in natural soils and sediments.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.273-282
• /
• 2003

A hydrophilic macromolecular network containing hydrophobic moieties has been prepared by free radical copolymerization of acrylamide and styrene in the presence of poly(vinyl alcohol) (PVA) and its potential as controlled drug delivery carrier was evaluated with tetracycline as a model antibiotic drug. The amount of drug was assayed spectrophotometrically. The network was characterized by optical microscopy, infra-red spectroscopy and structural parameters such as average molecular weight between cross1inks ($M_c$), cross1ink density (q) and number of elastically effective chains ($V_e$) were evaluated. It was found that with increasing concentration of PVA, ST and MBA in the hydrogel, the release rate initially increases but after definite concentrations of the above components the release rate falls. In the case of AM, release rate constantly decreases with increasing AM concentration in the hydrogel.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1560-1564
• /
• 2005

The influence of cetyltrimethylammonium bromide (CTAB) on the electrochemical behavior of bisphenol A at the carbon paste electrode (CPE) was investigated. CTAB, with a hydrophobic C-H chain, can adsorb at the CPE surface via hydrophobic interaction and then change the electrode/solution interface, and finally affects the electrochemical response of bisphenol A, confirming from the remarkable oxidation peak current enhancement. The electrode process of bisphenol A was examined, and then all the experimental parameters which affects the electrochemical response of bisphenol A, such as pH value of the supporting electrolyte, accumulation potential and time, potential scan rate and the concentration of CTAB, were examined. Finally, a sensitive and simple voltammetric method was developed for the determination of bisphenol A. Under the optimum conditions, the oxidation peak current of bisphenol A varied linearly with its concentration over the range from $2.5\;{\times}\;10^{-8}\;to\;1\;{\times}\;10^{-6}$ mol/L, and the detection limit was found to be $7.5\;{\times}\;10^{-9}$ mol/L. This method was successfully employed to determine bisphenol A in some waste plastic samples.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.131-138
• /
• 1996

The conformational transition of oligopeptide multimer,-(HPPHPPP)n-, is studied (H:hydrophobic amino acid, P:hydrophilic amino acid). The helix/coil transitions are detected in the multimer. The transition depends on the number of amino acid in the sequence, the concentration of the oligopeptide, and temperature which affects helix stability constant (${\xi}$) and hydrophobic interaction parameter (wj). In the thermodynamic equilibrium system jA${\rightarrow}$Aj (where A stands for oligopeptide monomer), Skolnick et al., explained helix/coil transition of dimer by the matrix method using Zimm-Bragg parameters ${\xi}$ and $\sigma$ (helix initiation constant). But the matrix method do not fully explain dangling H-bond effects which are important in oligopeptide systems. In this study we propose a general theory of conformational transitions of oligopeptides in which dimer, trimer, or higher multimer coexists. The partition of trimer is derived by using zipper model which account for dangling H-bond effects. The transitions of multimers which have cross-linked S-S bonds or long chains do not occur, because they keep always helical structures. The transitions due to the concentration of the oligopeptides are steeper than those due to the chain length or temperature.