• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1742-1746
• /
• 2008

An EHD (Electro-Hydro-Dynamic) jet for electrostatic inkjet head shows advantages to print micro-size patterns using various inks because it can generate sub-micron droplets and can use highly viscous inks. Thus, many researchers in industrial fields are concerned about the EHD jet in these days. Since the basic principle of the EHD jet is to form a droplet from an apex of meniscus at the end of the nozzle, the ejection mechanism can be changed by the shape of the meniscus. The stable ejection of the droplet is greatly affected by the shape of the meniscus which is also influenced by surface characteristics of the nozzle, electric potential and ink properties. Experiments have been performed using the nozzles with hydrophilic and hydrophobic coatings in this study. The hydrophobic nozzle forms the stable droplets in wider range of the electric potential than the hydrophilic nozzle does.

• 한국전기전자재료학회논문지
• /
• 제14권10호
• /
• pp.821-827
• /
• 2001

In this study performed to identify a degradation mechanism in macromolecular insulating material, the contact angel, surface potential decay, surface resistivity, and XPS analysis were compared after exposure of FRP laminate to plasma discharge. In the case of contact angle, the surface of specimen untreated showed weak hydrophobic property of 73。. However, the contact angle was decreased to 20。in the plasma-treated specimen. In the case of chemical changes arising form plasma treatment, carboxl radicals were generated mainly in the surface treated, which was rapidly changed to the hydrophilic one. In the corona potential decay study to determine the electrical changes of the surface, positive charges were rapidly decreased when compared with negative charges, leading to negative property in the surface of specimen not treated. However, in the case of the hydrophilic surface, lots of carboxl radicals acting as positive polarity were generated, resulting in positive surface. Owing to such positive surface, charges of negative polarity applied were rapidly decreased.

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.13-17
• /
• 2015

In wafer level molding progress, the thermal releasing failure phenomenon is shown up as the important problem. This phenomenon can cause the problem including the warpage, crack of the molded wafer. The thermal releasing failure is due to the insufficiency of adhesion strength degradation of the molding tape. To solve this problem, we studied experimental method increasing the release property of the molding tape through the plasma surface treatment on the wafer substrate. In this research, the vacuum plasma treatment system is used for release property improvement of the molding tape and controls the operating condition of the hydrophilic($O_2$, 100kW, 10min) and hydrophobic($C_2F_6$, 200kW, 10min). In order to perform the peeling test for measuring the releasing force precisely, we remodel the micro scale material property evaluation system developed by Korea institute of industrial technology. In case of hydrophilic surface treatment on the wafer substrate, we can figure out the releasing property of molding tape increase. In order to grasp the effect that it reaches to the release property increase when repeating the hydrophilic treatment, we make an experiment with twice treatment and get the result to increase about 12%. We find out the hydrophilic surface treatment method using plasma can improve releasing property of molding tape in the wafer level molding process.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.913-919
• /
• 2012

This paper presents results for dispensing and measuring micro-particles using a pneumatic dispensing system. Particle-suspended liquid droplets were dispensed and analyzed quantitatively at various particle concentrations and applied pressures. By using a developed experimental setup, the number of particles and the particle volume ratio in sequentially dispensed droplets were measured. Hydrophilic and hydrophobic surfaces were tested to find a suitable surface for counting the number of particle. It was confirmed that the dispensed particles concentrated into the center of the droplet on the smooth CD surface after evaporation of liquid. As the applied positive pressure increased, the number of particles per droplet increased consistently and the volume fraction of particles remained constant.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.55-58
• /
• 2002

To control the frost formation, a temperature variation of the cooling plate and characteristics on hydrophilic and hydrophobic surfaces was attempted. As a temperature variation of the cooling plate, being closely related to the frost layer density of frost layer is found to be affected by the melting process inside the frost layer during the heating period. At characteristics on surface, completely different structures of frost are appeared in the initial stage of frost formation due to the difference in surface conditions, while those effects are vanished with time. It is found that the frost thickness, density and heat flux characteristics are closely associated with the frost structure.

• 공업화학
• /
• 제21권3호
• /
• pp.343-348
• /
• 2010

저밀도 폴리에틸렌(low density polyethylene, LDPE) 필름의 표면을 다양한 반응 조건하에서 함산소불소화하여 hydroperoxide 관능기를 도입시켜 표면특성을 변화시켰다. 또한 생성된 hydroperoxide 관능기를 반응 개시제로 친수성 그룹을 가지는 단량체인 acryl amide (AM)와 소수성 그룹을 가지는 단량체인 methyl methacrylate (MMA)를 그라프트 중합시켜 LDPE 필름의 표면을 2차 개질하였다. 또한 LDPE, 함산소불소화 된 LDPE (OFPE), AM 및 MMA 단량체가 그라프트 된 OFPE 필름의 표면특성은 1,1-diphenyl-2-picrylhydrazyl (DPPH), 감쇠전반사 분광법, 시차주사 열량분석기 및 접촉각 측정법 등으로 분석하였다. DPPH 라디칼 분석법의 결과로부터, OFPE의 hydroperoxide 관능기의 양은 함산소불소화 총압력과 F2 가스의 부분압이 증가함에 따라 증가함을 알 수 있었다. 접촉각 및 표면 자유에너지 분석결과로부터, 함산소불소화에 의해서 생성된 hydroperoxide 관능기와 AM과 같은 친수성 그룹을 가지는 단량체의 그라프트 중합은 LDPE 필름 표면에서 물과 같은 친수성 용매의 접촉각을 감소시키고, MMA와 같은 소수성 그룹을 가지는 단량체의 경우는 LDPE 필름 표면에서 methylene diiodide와 같은 비극성 용매의 표면 접촉각을 감소시켰다. 이는 AM 및 MMA 단량체의 그라프트 중합에 의한 것으로, LDPE 필름 표면은 친수성 및 소수성 용매에 대한 젖음성이 향상되었다.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.655-663
• /
• 2010

표면 젖음성은 비등 상황에서 주요 인자인 임계열유속과 비등열전달 모두에 영향을 미치는 중요한 표면인자이다. 지금까지 표면 젖음성을 이용한 비등 조건 개선에 대한 연구는 한가지 물질의 표면 구조를 개질하는데 국한되었다. 본 논문에서는 최적화된 비등 조건을 이룰 수 있는 표면 젖음성을 찾기 위한 연구의 일환으로 소수성 물질과 친수성 물질의 혼합을 시도하였다. 가열 표면은 표면 접촉각이 $60^{\circ}$인 친수성 표면위에 표면 접촉각 $120^{\circ}$의 소수성 물질 점이 생기도록 개질되었다. 개질된 소수성 점은 마이크로 단위와 밀리단위로 그 크기를 변화시켜 가며 풀 비등 성능을 평가하였다.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.17-24
• /
• 2015

The formation of heat islands causes high energy demand for space cooling and peak cooling loads in conditioned buildings. High-temperature fluctuations on a building roof may cause mechanical stress and increase surface deterioration. Thermal energy storage (TES) systems using microencapsulated phase-change materials (MPCMs) have been recognized as one of the most advanced energy technologies for enhancing the energy efficiency and sustainability of buildings. In this study, we prepared MPCM/paint composites for mitigating the heat island effect and reducing peak temperature. In addition, we carried out thermal and physical analysis of prepared MPCM composite samples by means of SEM, FTIR spectroscopy, DSC, and TGA. Further, we evaluated the dynamic heat transfer performance of heat-storage tiles painted with 10 g of heat-storage paint. From the obtained results, we deduced that MPCM/hydrophilic paint composites are more applicable to various fields, including the building sector, than MPCM/hydrophobic paint composites. On the basis of SEM and FTIR spectroscopy results, we concluded that materials with hydrophilic properties are more compatible with MPCMs than those with hydrophobic properties. In addition, DSC analysis results revealed that MPCM/hydrophilic paint composites have better compatibility, higher latent heat capacity, and better thermal properties than other composites. TGA results showed that hydrophilic-paint-based composites have higher thermal durability than hydrophobic-paint-based composites. Finally, a lot of MPCM-loaded heat-storage tiles showed lower peak temperatures at all measurement positions.

• 대한기계학회논문집B
• /
• 제39권11호
• /
• pp.871-884
• /
• 2015

유체이송 기술은 마이크로 유체시스템 개발에서 핵심문제로 인식되고 있다. 최근 명(2014)은 외부동력을 사용하지 않고 액적을 이동시킬 수 있는 새로운 개념을 제안하고, 초기에 반원통형 형상을 가지는 가상의 2차원 액적에 대한 수치해석을 통해 이 개념이 성립함을 보였다. 또한 명과 권(2015)은 친수성/소수성 표면위에서 초기 3차원 반구 형상의 실제 물 액적이송의 메커니즘을 시간에 따른 액적형상과 액적 내부의 운동에너지, 중력에너지, 표면자유에너지 및 압력에너지의 수치해석 결과를 통해 규명하였다. 본 연구는 새로운 개념을 확립시키기 위해 초기 구형액적에 대한 3차원 수치해석을 수행하고, 액적이송의 메커니즘을 모세관력 힘의 불균형 관점에서 액적 형상과 다양한 에너지의 수치해석 결과를 통해 규명하였다.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.354-359
• /
• 2006

일반적인 포토리소그래피를 사용하지 않고 마이크로미터 혹은 나노미터 단위의 패턴형성을 위한 연구가 최근 많은 연구그룹에 의해 진행되고 있다. 본 실험에서는 패턴이 형성된 polydimelthylsiloxane (PDMS) 몰드를 octadecyltrichlorosilane (OTS) 용액에 dipping 하여 PDMS 표변에 OTS 단분자막을 형성하고 micro contact printing (${\mu}-CP$) 방법으로 OTS 단분자 막을 유리기판 표면위로 전사하였다. 전사된 OTS 단분자막은 친수성 유리기판 위에서 소수성 표면특성을 갖게 하며, 친수성은 용액 속에 dipping 하였을 때 소수성 표면 위에는 코팅되지 않도록 한 이 방법을 이용하여 유리기판 위에 Ag 패턴을 형성하였다. 또한, 세척직후 친수성 표면 특성을 보이는 유리기판의 시간에 따른 접촉각 측정을 통해 표면에너지의 변화를 분석하였다.