• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.3
• /
• pp.175-182
• /
• 2021

Objectives: In this prospective randomized controlled trial, we measured the primary and secondary stability of two surface-treated implants placed in the posterior maxilla, applied 3-month loading protocols, and compared and analyzed the short-term outcomes of the implants. Patients and Methods: From June 2018 to June 2019, patients with a residual bone height of 4 mm in the posterior maxilla were enrolled and randomly divided into two groups to place SA implants (Osstem Implants, Korea) in Group A and NH implants (Hiossen, USA) in Group B. Finally, 14 implants placed in 13 patients in Group A and 17 implants placed in 14 patients in Group B were analyzed. The measured primary and secondary stability of each implant was represented by implant stability quotient (ISQ), and treatment outcomes were evaluated. Results: Group A consisted of patients with an average age of 62.2 years (range, 48-80 years), and Group B consisted of patients with an average age of 58.1 years (range, 35-82 years). Primary stability was 73.86±6.40 and 71.24±5.32 in Groups A and B, respectively (P=0.222). Secondary stability was 79.07±5.21 in Group A and 78.29±4.74 in Group B (P=0.667). A steep increase in ISQ during the healing period was observed in Group B, though it was not significant (P=0.265). The mean follow-up period was 378.5±164.6 days in Group A and 385.3±167.9 days in Group B. All implants in each group met the success criteria, and the success rate was 100%. Conclusion: Two surface-treated implants placed in the posterior maxilla with greater than 4 mm alveolar bone height exhibited successful one-year treatment outcomes if a primary stability of 65 or higher ISQ was obtained and a 3-month early loading protocol was applied.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.677-683
• /
• 2012

1-octanethiol and vinyl acetate telomers ($R_8S$-nVAc) were synthesized and hydrolyzed with sodium hydroxide subsequently, 1.2-epoxyhexane was then introduced to the telomers. In addition, we prepared cotelomers of multi-alkylated nonionic surfactants with a molecular structure of xRnMA-yVA (x; hydrophobic group, y; hydrophilic group, MA; methacrylic ester, VA; vinyl alcohol, R; and alkyl group) and cross-linked with sodium tetraborate decahydrate. Their active surface properties were investigated by several techniques such as surface tension, foaming property, and emulsification power measurements. The surface tension of $R_8S$-8.8VA decreased without the introduction of 1.2-Epoxy hexane, and the degree of emulsification and foaming abilities of $R_8S$-8.8VA increased without the introduction of 1.2-Epoxy hexane. However, the differences were insignificant. The epoxy groups were attached to a $R_8S$-8.8VA cotelomer with a limited variation of the active surface properties. The surface tension of $1.1R_6MA$-8.8VA decreased after cross-linking subsequently, the degree of emulsification and foaming abilities of $1.1R_6MA$-8.8VA increased after cross-linking. However, there was no clear difference between them. The B-O bonds were attached to a $1.1R_6MA$-8.8VA cotelomer with a limited variation of the active surface properties.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.2
• /
• pp.48-62
• /
• 1997

Chitosan oligosaccharides having aldehyde group at reducing end were prepared by oxidative-deamination reaction of chitosan by using sodium nitrite, and the resulting aldehyde group was reduced to 2, 5-anhydro-D-mannitol group. The obtained chitosan oligosaccharides showed an average degree of polymerization 2~3 by gel permeation chromatography analysis. It was highly soluble in hydrophilic solvents and thermally stable. N, N-diacyl, O-acyl chitosan oligosaccharides were obtained from the reaction between chitosan oligosaccharides and acyl chloried under dimethylaminopyridine. From differential scanning calorimetric measurement, N, N-dilauroyl, O-lauroyl chitosan oligosaccharides showed mesophase region, which was confirmed by polarized microscope as a thermotropic liquid crystalline state. X-ray diffraction pattern revealed that N, N-dilauroyl, O-lauroyl chitosan oligosaccharedes were highly crystalline, whereas chitosan oligosaccharides were not.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3665-3670
• /
• 2013

The R3V6 peptide includes a hydrophilic arginine stretch and a hydrophobic valine stretch. In previous studies, the R3V6 peptide was evaluated as a gene carrier and was found to have low cytotoxicity. However, the transfection efficiency of R3V6 was lower than that of poly-L-lysine (PLL) in N2A neuroblastoma cells. In this study, the transfection efficiency of R3V6 was improved in combination with high mobility group box 1A domain (HMGA). HMGA is originated from the nuclear protein and has many positively-charged amino acids. Therefore, HMGA binds to DNA via charge interaction. In addition, HMGA has a nuclear localization signal peptide and may increase the delivery efficiency of DNA into the nucleus. The ternary complex with HMGA, R3V6, and DNA was prepared and evaluated as a gene carrier. First, the HMGA/DNA complex was prepared with a negative surface charge. Then, R3V6 was added to the complex to coat the negative charges of the HMGA/DNA complex, forming the ternary complex of HMGA, R3V6, and DNA. A physical characterization study showed that the ternary complex was more stable than the PLL/DNA complex. The HMGA/R3V6/DNA complex had a higher transfection efficiency than the PLL/DNA, HMGA/DNA, or R3V6/DNA complexes in N2A cells. Furthermore, the HMGA/R3V6/DNA complex was not toxic to cells. Therefore, the HMGA/R3V6/DNA complex may be a useful gene delivery carrier.

• Journal of the Korean Applied Science and Technology
• /
• v.1 no.1
• /
• pp.33-36
• /
• 1984

As the previous report, by the administration of Sogi , Gyrophoraesculenta, to rats, cholesterol levels in liver and plasma were lowered. To know the Characteristics of the effective material contained in Iwatake, the aqueous and the alcoholic extracts were prepared, and these extracts were miked in the diet. After the feeding for 6weeks, cholesterols in liver and in plasma were determined. Either the aqueous or the alcoholic extracts administered groups showed a little low value as to these cholesterol levels compared with the value of group without the extract, but these values of alcoholic extract administered group were lower than those of aqueous extract group. From this result, it was assumed that this effective material would be the organic compound with hydrophilic groups.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.555-561
• /
• 2003

The self-assembled monolayer coating of octadecyltrichlorosilane (OTS) on the silicon based MEMS was investigated and surface characteristics were considered as a function of coating conditions and reagent composition. The sulfuric peroxide mixture (SPM) solution was used to form -OH group which caused the hydrophilic characteristic on silicon surftce. Highest hydrophilicity was obtained by SPM solution with 85% acid content at room temperature. OTS was applied on the silicon surface by means of self-assembled monolayers (SAMs) coating. It was found that sol-gel reaction was took place between -OH group on the silicon surface and -Cl group in OTS. As a result, the contact angle increased due to the increase of hydrophobicity by Si-O bonding of SAMs. Sol-gel reaction could be controlled by coating conditions as well as reagent composition in OTS coating solution.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.613-617
• /
• 2009

3D-QSARs for the inhibition activities against protox by herbicidal 2-N-phenylisoindolin-1-one derivatives were studied quantitatively using CoMFA and CoMSIA methods. The result of the statistical quality of optimized CoMSIA model 2 ($FF:\;{r^2}_{cv.};\;0.973\;&\;{r^2}_{ncv.};\;0.612$) was higher than that of CoMFA model 1 ($AF:\;{r^2}_{cv.};\;0.414\;&\;{r^2}_{ncv.};\;0.909$). Also, the relative contribution of the optimized CoMSIA model 2 showed the steric (24.6%), electrostatic (31.0%), hydrophobic (ClogP, 23.4%) and H-bond acceptor field (21.0%), respectively. From the results of the contour maps, the protox inhibition activities are expected to increase when steric favor and H-bond acceptor favor groups are substituted on $R_2$ position and positive favor group are substituted on $C_2,\;C_3,\;and\;C_5$ atom in phenyl ring of $R_2$ position. And the inhibition activities are expected to increase when hydrophobic favor group is substituted on $C_1,\;C_3$ atom in phenyl ring of $R_2$ position and $C_1$ atom of $R_2$ position and hydrophilic favor groups are substituted on $C_4$ atom in phenyl ring of $R_1$ position and the terminal group of $R_1$ position.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.85-92
• /
• 2015

PURPOSE. This study aimed to investigate the efficacy of cleaning solutions on saliva-contaminated zirconia in comparison to air-abrasion in terms of resin bonding. MATERIALS AND METHODS. For saliva-contaminated air-abraded zirconia, seven cleaning methods)-no contamination (NC), water-spray rinsing (WS), additional air-abrasion (AA), and cleaning with four solutions (Ivoclean [IC]; 1.0 wt% sodium dodecyl sulfate [SDS], 1.0 wt% hydrogen peroxide [HP], and 1.0 wt% sodium hypochlorite [SHC])-were tested. The zirconia surfaces for each group were characterized using various analytical techniques. Three bonded resin (Panavia F 2.0) cylinders (bonding area: $4.5mm^2$) were made on one zirconia disk specimen using the Ultradent jig method [four disks (12 cylinders)/group; a total of 28 disks]. After 5,000 thermocycling, all specimens were subjected to a shear bond strength test with a crosshead speed of 1.0 mm/minute. The fractured surfaces were observed using an optical and scanning electron microscope (SEM). RESULTS. Contact angle measurements showed that groups NC, AA, IC, and SHC had hydrophilic surfaces. The X-ray photoelectron spectroscopy (XPS) analysis showed similar elemental distributions between group AA and groups IC and SHC. Groups IC and SHC showed statistically similar bond strengths to groups NC and AA (P>.05), but not groups SDS and HP (P<.05). For groups WS, SDS, and HP, blister-like bubble formations were observed on the surfaces under SEM. CONCLUSION. Within the limitations of this in vitro study, some of the cleaning solutions (IC or SHC) were effective in removing saliva contamination and enhancing the resin bond strength.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.101-109
• /
• 2003

In the present study, crosslinked poly(vinyl alcohol) (PVA) membranes were prepared at various crosslinking agent content using sulfosuccinic acid (SSA) containing sulfonic acid group ($SO_3H)$. To reduce methanol permeability, silica was introduced to the membrane using sol-gel process. The hybrid membranes were studied in relation to proton conductivity and methanol permeability. It was found that both these properties were very dependent on the effect of SSA content as a crosslinking agent and as a donor of hydrophilic $SO_3H)$ group. The proton conductivities of these PVA/SSA/Silica membranes are in the range from $10^{-3}\;to\;10^{-2}$S/cm and the methanol permeabilities are in the range from $10^{-8}\;to\;10^{-7}\;cm^2/sec$.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.46-52
• /
• 2006

High-density micromass culture was needed to take three dimensions culture with ASCs(adipose derived stromal cells) and chondrogenesis. However, the synthetic polymer has hydrophobic character and low affinity to cells and other biomolecules. Therefore, the surface modification without changes of physical and chemical properties is necessary for more suitable condition to cells and biomolecules. This study was performed to investigate the effect of surface modification of poly (lactic-co-glycolic acid)(PLGA) scaffold by plasma treatment (P(+)) on the adhesion, proliferation and chondrogenesis of ASCs, and not plasma treatment (P(-)). ASCs were isolated from human subcutaneous adipose tissue obtained by lipectomy and liposuction. At 1 hour 30 minutes and 3days after cell seeding onto the P(-) group and the P(+) group, total DNA amount of attached and proliferated ASCs markedly increased in the P(+) group (p < 0.05). The changes of the actin under confocal microscope were done for evaluation of cellular affinity, at 1 hour 30 minutes, the shape of the cells was spherical form in all group. At 3rd day, the shape of the cells was fiber network form and finely arranged in P(+) group rather than in P(-) group. RT-PCR analysis of cartilage-specific type II collagen and link protein were expressed in 1, 2 weeks of induction. Amount of Glycoaminoglycan (GAG) markedly increased in P(+) group(p < 0.05). In a week, extracellular matrix was not observed in the Alcian blue and Safranin O staining. However in 2 weeks, it was observed that sulfated proteoglycan increased in P(+) group rather than in P(-) group. In conclusion, we recognized that plasma treatment of PLGA scaffold could increase the hydrophilic property of cells, and provide suitable environment for high-density micromass culture to chondrogenesis