• 분석과학
• /
• 제12권6호
• /
• pp.509-514
• /
• 1999

Titanium(IV) isoproxide에 유기첨가제로 아세트산을 첨가하여 단일성분계인 치환된 titanium(IV) isoproxide를 합성한다. 합성된 titanium 착화합물은 세가지 형태로 된 5배위 및 6배위의 구조로 존재함을 FT-IR, $^1H$ 및 $^{13}C$ NMR 그리고 UV-Vis 스펙트라로 확인하였다. 이 착물에 대한 가수분해 반응을 $^1H$-NMR spectroscopy를 이용해 관찰하였고 FT-IR spectroscopy로 가수분해 및 건조시킨 후의 구조 변화를 관찰하여 보았으며 리간드의 존재 유무도 살펴보았다.

• Journal of Microbiology and Biotechnology
• /
• 제27권6호
• /
• pp.1112-1119
• /
• 2017

The aim of this study was to develop a potential process for bioethanol production from Hydrodictyon reticulatum (HR), a filamentous freshwater alga, using Saccharomyces cerevisiae (KCTC7017). From the sugar solutions prepared by the four different hydrolysis methods, bioethanol production ranged from 11.0 g/100 g dried material (acid hydrolysis) to 22.3 g/100 g dried material (enzymatic hydrolysis, EH). Bioethanol was fermented from a highly concentrated sugar solution obtained by a decompression-mediated (vacuum) enrichment method (VE). As the results, ethanol was more efficiently produced from HR when sugar solutions were concentrated by VE following EH (EH/VE). Using multiple feeding of the sugar solution prepared by EH/VE from HR, ethanol reached up to a concentration of 54.3 g/l, corresponding to 24.9 g/100 g dried material, which attained the economic level of product concentration (approximately 5%). The results indicate that by using HR, it is feasible to establish a bioethanol production process, which is effective for using microalgae as the raw material for ethanol production.

• 폴리머
• /
• 제29권4호
• /
• pp.375-379
• /
• 2005

생분해성 고분자인 poly(L-lactic acid) (PLLA)에 판상구조의 몬모릴로나이트(montmorillonite, MMT)를 첨가하여 필름형태의 나노복합재료를 제조하고, 무기나노입자의 첨가유무와 가수분해 전후의 열적 특성, 점탄성 특성, 모폴로지 등을 조사하였다. PLLA/MMT 나노복합재료의 XRD 분석결과와 TEM 사진으로부터 MMT 입자가 PLLA에 박리 및 분산되어 있음을 확인하였으며, 가수분해가 진행됨에 따라 U 결정 영역의 상대적인 양이 증가하므로 용융에너지 (${\Delta}H_m$가 더 필요함을 알 수 있었다. MMT를 첨가한 경우에 MMT가 강화제 역할을 하기 때문에 저장탄성률이 더 높은 값을 가졌는데, 이는 PLLA를 나노복합화하였을 때 인장강도, 충격강도 등의 기계적 물성이 증가한다는 이전의 연구와도 잘 일치하였다. 또한. 가수분해 전/후의 SEM사진으로부터, 표면에 스피노달(spinodal) 분해에 의한 거칠고 원형의 구멍들이 생겼음을 관찰할 수 있었으며, 가수분해가 진행됨에 따라 나노복합재료는 원형의 구멍들의 크기가 가수분해전보다 더 커졌을 뿐 원래의 형상을 유지하였다. 본 연구를 통하여 PLLA/MMT나노복합재료의 생분해 속도와 열적, 기계적 특성의 조절 가능성을 제시하였다.

• 한국세라믹학회지
• /
• 제42권11호
• /
• pp.722-728
• /
• 2005

A wet-chemical route was utilized to obtain nanosized crystalline goethite ($\alpha$-FeOOH) particle, which was known as an oxidation catalyst in reducing carbon monoxide (CO) and dioxine during incineration. A cost-effective $FeSO_4{\cdot}7H_2O$ was used as starting raw material and a successive process of hydrolysis-oxidation was utilized as synthetic method. The effects of the initial $Fe^{2+}$ concentration, hydrolysis time and oxidation period on the crystalline phase and particle characteristics were systematically investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and BET analyses. It was found that the spindle-shaped crystalline $\alpha$-FeOOH particle with the width of 70 nm and the length of 200 nm could be obtained successfully when the initial concentration of 1.5 M, hydrolysis time of 4h, and oxidation period of 10 h, respectively. In addition, it was observed that the spindle-shaped $\alpha$-FeOOH particle consisted of nano-sized primary crystallites of $30\~50\;nm$, which were de-agglomerated into individual particle and successively re­agglomerated into spherical or irregular-shaped agglomerates beyond certain periods in the hydrolysis and oxidation process.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.151-158
• /
• 2015

The aim of this research is to derive an optimum operating condition for the thermal solubilization equipment that is employed to increase concentration of soluble organic materials and to assess whether it would be possible to use the waste sludge generated by thermal solubilization reaction as an external carbon source in biological denitrification process. For the purpose, we have constituted a laboratory-size thermal solubilization equipment and have assessed thermal hydrolysis efficiency based on various reaction temperature and reaction time. We have also derived SDNR using the waste sludge generated by thermal solubilization reaction through a batch experiment. As a result of research, the highest thermal hydrolysis efficiency of about 42.8% was achieved at $190^{\circ}C$ of reaction temperature and at 90 minutes of reaction time. And when SDNR was derived using the waste sludge, the value obtained was $0.080{\sim}0.094\;g\;NO_3{^-}-N/g\;MLVSS{\cdot}day$, showing SDNR that is higher than that obtained by the results of existing researches that used common wastewater as an external carbon source. Accordingly, in view of the fact that food wastes vary quite a bit in characteristics based on the area they are generated from and seasonal change, it seems that a flexible operation of thermal solubilization equipment is required through on-going monitoring of food wastes that are imported to food wastes recycling facilities.

• 한국미생물·생명공학회지
• /
• 제38권4호
• /
• pp.362-372
• /
• 2010

다양한 하 폐수 처리공정 중 혐기성 소화공정은 이산화탄소 배출을 감소시키고 생성되는 메탄을 에너지로서 사용할 수 있는 장점을 가지고 있다. 본 논문에서는 이러한 혐기성 소화공정의 문제점과 보완점에 대해 살펴보았다. 가수분해과정은 혐기성 소화과정 중 율속단계에 해당하여 소화공정과정을 촉진시키고 바이오가스의 생산을 증가시키기 위하여 다양한 전처리 방법이 개발되어왔다. 현재 혐기성 소화공정을 위한 전처리 방법 중 열처리 방법, 초음파 처리, 기계적 처리방법, 화학적 처리방법 등이 상업적으로 이용되고 있으며, 이들 공정은 슬러지 플록 또는 세포의 파괴를 통해 세포분획물이 생물학적으로 분해될 수 있는 형태로 전환시키는 것을 목적으로 한다. 이러한 과정들 모두는 특정 상황에 따른 장점과 단점을 모두 지니고 있으므로 각 공정과정에 대한 이해와 이를 통한 적용을 통해 특정 슬러지에 적합한 최적의 전처리 공정을 도출해 낼 필요가 있다. 또한 혐기성 소화공정의 효율증대와 경제성 확대를 위한 혐기성 소화공정 개발이 필요하다고 할 수 있다.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.79-87
• /
• 1994

AIN은 불안정하여 물과 접촉하면 12시간 이내에 172cal/g의 열을 내면서 가수분해되어 알루미나 삼수화물이 생성되었다. AIN의 가수분해 과정은 초기에 비정질 알루미나 수화물이 생성되었으며, 가수분해 조건에 따라 비정질알루미나 수화물의 용해-재석출과정으로 알루미나 삼수화물 특히 bayerite가 생성되었고, 응축과정으로 pseudo-boe-hmite가 AIN 입자표면에 생성되었다. 가수분해 온도 4$0^{\circ}C$ 이하에서는 비정질 알루미나 수화물이, 4$0^{\circ}C$와 6$0^{\circ}C$ 사이에서는 bayerite가 각각 생성되었고, 6$0^{\circ}C$ 이상의 경우는 초기에 pseudo-boehmite의 입자표면에 형성되었다. bayerite는 가수분해 시간이 길수록, 그리고 용액내 pH가 높을수록 잘 생성되었으나 pseudo-boehmite는 가수분해 반응이 급격히 일어날 때와 용액내 ethyl alcohol의 존재로 OH 기의 흡착을 방해하여 가수분해 반응이 억제될 때 잘 생성되었다. 그리고 pH=2.0인 용액에서는 AIN의 가수분해가 거의 일어나지 않았다.

• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.325-330
• /
• 2007

High porous AlO(OH) gel is used in precursor of ceramic material, coating material and porous catalyst. For use of these, not only physiochemical control for particle morphology, pore characteristic and peptization but also studies of synthetic method for preparation of high porous AlO(OH) gel were required. In this study, high porous AlO(OH) gel was prepared through the aging and filtration process of aluminum hydroxides gel precipitated by the hydrolysis reaction of $Na_2CO_3$ solution and $Al_2(SO_4)_3$ and $Na_2SO_4$ mixed solution. In this process, optimum synthetic condition of AlO(OH) gel having excellent pore volume as studying the effect of hydrolysis pH on gel precipitates has been studied. Hydrolysis pH brought about numerous changes on crystal morphology, surface area, pore volume and pore size. Physiochemical properties of gel were investigated as using XRD, TEM, TG/DTA, FT-IR and $N_2$ BET method.

• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.99-102
• /
• 1998

Cordierite ceramics with low dielectric constants were obtained through sol-gel techniques using as metal alkoxides. The powders for the sintered cordierite ceramics were prepared by hydrolysis of metal alkoxides with ethanol and distilled water. In the hydrolysis, the mole ratio of HCI/TEOS was controlled by changing the amount of HCI as a catalyst. The sol-gel derived powders were dried, pressed, and fired at $1300^{\circ}C$. The dried powders were calcined at $800{\circ}C$ for 3hours to remove residual organics. The fired bodies with different dielectric constants were obtained by using HCI adjusted to various mole ratios of HCI/TEOS in the process. The variation of the amount of HCI catalyst led to a significant influence on dielectric contant, which was attributed to the formation of pores in the sintered body. Especially, the porosity of the sintered body influenced the dielectric constants.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.503-508
• /
• 1991

High pure and fine mullite powders were synthesized from Al-secbutoxide[Al(OC4H9)3] and TEOS[Si(OC2H5)4] (SiO2/Al2O3=2/3 mole). Sol-Gel process by partial hydrolysis technique, as it were, first, TEOS was partially hydrolysized and then mixed with Al-secbutoxide for complete hydrolysis was used. The mullite precursor was synthesized within 30 hrs, which was reduced about a half of synthetic time in comparison with the other's study. Al-Si spinel was formed at 980℃ and mullite crystal was formed at 1200℃. Mullite powders synthesized in this study was spherical type like those of the other studies and particle sizes were very fine. Also mullite powders calcined at 1,600℃ had a stoichiometric composition (3Al2O3·2SiO2) and lattice constants were coincided with known theoretical values.