• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1643-1646
• /
• 2012

Three Ni-based catalysts with different clay as support were prepared and tested in the hydrogenation of maleic anhydride, among which Ni/clay1 showed best activity and selectivity. Over Ni/clay1 catalyst prepared by impregnation method, 97.14% conversion of maleic anhydride and 99.55% selectivity to succinic anhydride were obtained at $180^{\circ}C$ under a pressure of 1 MPa. Catalytic activity was greatly influenced by the temperature and weighted hourly space velocity. Catalyst deactivation studies showed that this catalyst have a long life time, the yield of MA still higher than 90% even after a reaction time of 60 h. X-ray diffraction (XRD) and $H_2$ temperature programmed reduction (TPR) were use to investigate the properties of the catalyst. XRD and TPR studies showed that Ni was present as $Ni^{2+}$ on the support, which indicated that there was no elemental nickel ($Ni^0$) and $Ni_2O_3$ in the unreduced samples. The formation of Ni was strong impact on catalytic activity.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.482-489
• /
• 2008

Ti-Cr alloys consist of BCC solid solution, C36, C14 and C15 Laves phase at high temperature. Among others, the BCC solid solution phase was reported to have a high hydrogen storage capacity. However, activation, wide range of hysteresis at hydrogenation/dehydrogenation, and degradation of hydrogen capacity due to hydriding/dehydriding cycles must be improved for its application. In this study, to improve such problems, we added a Nb. For attaining target materials, Ti-10Cr-xNb(x=1, 3, 5wt.%) specimens were prepared by arc melting. The arc melting process was carried out under argon atmosphere. As-received specimens were characterized using XRD(X-ray diffraction), SEM(Scanning Electron Microscopy) with EDX(Energy Dispersive X-ray) and TG/DSC(Thermo Gravimetric Analysis/Differential Scanning Calorimetry). In order to examine hydrogenation behavior, the PCI(pressure-Composition-Isotherm) was performed at 293, 323, 373 and 423K.

• Applied Biological Chemistry
• /
• 제36권2호
• /
• pp.93-98
• /
• 1993

촉매독으로 작용하는 인화합물과 유황화합물의 첨가에 의해서 수소첨가 반응되었을 때 나타나는 대두유의 물리적 화학적 성질을 규명하고저 하였다. 대두유에 첨가한 인화합물의 양이 증가할수록 oleic acid의 감소와 linoleic acid, stearic acid가 증가되었으며 유황화합물의 함량이 증가할수록 $10.0^{\circ}C$와 $21.1^{\circ}C$에서의 고체지 함량이 증가하는 반면에 점차로 $33.3^{\circ}C$와 $37.8^{\circ}C$에서 고체지 함량은 감소하였다. 유황화합물을 첨가하였을 경우에 비하여 인화합물을 첨가한 대두경화유의 융점이 높게 나타났고 유황화합물의 함량이 증가할수록 선택적인 경화조건이 나타났으며 정제공정을 거치면서 대두유에 존재하는 납과 비소는 극미량(0.01 ppm)으로 검출되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2737-2742
• /
• 2011

Ring-opening metathesis polymerization (ROMP) of an ethyl-substituted tetracyclododecene (8-ethyltetracyclo[$4.4.0.1^{2,5}.1^{7,10}$] dodec-3-ene, Et-TCD) was carried out in the presence of a ternary catalyst system consisting of $WCl_6$, triisobutyl aluminium (iso$Bu_3Al$), and ethanol. The optimal molar ratio of Et-TCD/$WCl_3$/iso-$Bu_3Al$/ethanol was found as 500/1/3/2 at which the yield of ring-opened polymer was 100%. 1-Hexene was shown to be an effective molecular weight controlling agent for ROMP reaction of Et-TCD. The hydrogenation of the ring opened polymer (p-Et-TCD) was conducted successfully using Pd(5 wt %)/${\gamma}$-$Al_2O_3$ at $80^{\circ}C$ for 1 h. Chemical structures of p-Et-TCD and its hydrogenated product($H_2$-p-Et-TCD) were characterized using 2D NMR techniques ($^1H-^1H$ COSY and $^1H-^{13}C$ HSQC). The changes of physical properties such as thermal stability, glass transition temperature and light transmittance after the hydrogenation were also investigated using TGA, DSC, and UV.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.8-18
• /
• 2022

With rapid industrialization and population growth, fossil fuel use has increased, which has a significant impact on the environment. Hydrogen does not cause contamination in the energy production process, so it seems to be a solution, but it is essential to find an appropriate storage method due to its low efficiency. In this study, Mg-based alloys capable of ensuring safety and high volume and hydrogen storage density per weight was studied, and Mg₂NiH_x synthesized with Ni capable of improving hydrogenation kinetics. In addition, in order to improve thermal stability, a hydrogen storage composite material synthesized with CaO was synthesized to analyze the change in hydrogenation reaction. In order to analyze the changes in the metallurgical properties of the materials through the process, XRD, SEM, BET, etc. were conducted, and hydrogenation behavior was confirmed by TGA and hydrogenation kinetics analysis. In addition, in order to evaluate the impact of the process on the environment, the environmental impact was evaluated through "Material Life Cycle Assessments" based on CML 2001 and EI99' methodologies, and compared and analyzed with previous studies. As a result, the synthesis of CaO caused additional power consumption, which had a significant impact on global warming, and further research is required to improve this.

• 대한전자공학회논문지SD
• /
• 제43권1호
• /
• pp.7-12
• /
• 2006

본 연구에서는 수소화 와 전자빔 사진식각 공정을 이용하여 비가역적이며 안정화된 마이크로 크기의 강자성 구조체를 개발하였다. $Fe_XZr_{100-x}(x=65-85\%)$의 평균성분과 약 1 nm 정도의 성분변조주기를 가지며 총두께가 100 nm 정도인 성분변조(CM) 된 Fe-Zr 박막이 적층되었다. CM Fe-Zr 박막의 자성성질은 SQWID magnetometer, VSM, 그리고 B-H loop tracer로 측정하였다. 수소화 과정 후에 CM 박막은 유사한 균질의 합금 막 보다 모든 성분에서 더 큰 자기 모멘트를 나타내었고 $Fe_{80}Zr_{20}$ 성분에서 가장 큰 증가를 보였다. 수소화 된 $Fe_{80}Zr_{20}$ CM 막은 상온에서 aging을 거친 후에 아주 큰 자기모멘트 증가를 보여 안정되고 비가역적이며 연자성 상태로 변화됨을 알 수 있었다. 전자빔 사진식각기술을 사용하여 원형의 윈도우를 $Fe_{80}Zr_{20}$ CM막 위에 형성한 후에 이 윈도우를 통하여 선택적인 수소화를 실행하였다. 사진식각기술을 통한 수소화는 $49\%$의 자기 모멘트를 증가 시켰다. 이 방법은 나노 크기의 구조에도 적용할 수 있다.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.543-549
• /
• 2010

The hydrogen energy had recognized clean and high efficiency energy source. The research field of hydrogen energy was production, storage, application and transport. The commercial storage method was using high pressure tanks but it was not safety. However metal hydride was very safety due to high chemical stability. Mg and Mg alloys are attractive as hydrogen storage materials because of their lightweight and high absorption capacity (about 7.6 wt%). Their range of applications could be further extended if their hydrogenation properties and degradation behavior could be improved. The main emphasis of this study was to find an economical manufacturing method for Mg-Ti-Ni-H systems, and to investigate their hydrogenation properties. In order to examine their hydrogenation behavior, a Sievert's type automatic pressure-compositionisotherm (PCI) apparatus was used and experiments were performed at 423, 473, 523, 573, 623 and 673 K. The results of the thermogravimetric analysis (TGA) revealed that the absorbed hydrogen contents were around 2.5wt.% for (Mg8Ti2)-10 wt.%Ni. With an increasing Ni content, the absorbed hydrogen content decreased to 1.7 wt%, whereas the dehydriding starting temperatures were lowered by some 70-100 K. The results of PCI on (Mg8Ti2)-20 wt.%Ni showed that its hydrogen capacity was around 5.5 wt% and its reversible capacity and plateau pressure were also excellent at 623 K and 673 K.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.518-525
• /
• 2019

The mechanical and corrosion behavior of the Russian zirconium fuel cladding alloy E110, predominantly used in VVERs, has been investigated for many decades. The recent commercialization of a new, optimized E110 alloy, produced on a sponge zirconium basis, gave the opportunity to compare the mechanical properties of the old and the new E110 fuel claddings. Axial and tangential tensile test experiments were performed with samples from both claddings in the MTA EK. Due to the anisotropy of the cladding tubes, the axial tensile strength was 10-15% higher than the tangential (measured by ring tensile tests). The tensile strength of the new E110G alloy was 11% higher than that of the E110 cladding at room temperature. Some samples underwent chemical treatment - slight oxidation in steam or hydrogenation - or heat treatment - in argon atmosphere at temperatures between 600 and $1000^{\circ}C$. The heat treatment during the oxidation had more significant effect on the tensile strength of the claddings than the oxidation itself, which lowered the tensile strength as the thickness of the metal decreased. The hydrogenation of the cladding samples slightly lowered the tensile strength and the samples but they remained ductile even at room temperature.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.191-191
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4069-4073
• /
• 2012

Metallacyclodimeric complexes of $[(Me_4en)Pd(L)]_2(ClO_4)_4$ ($Me_4en$ = N,N,N',N'-tetramethylethylenediamine; L = dimethylbis(4-pyridyl)silane (dmps), methylvinylbis(4-pyridyl)silane (mvps)) have been synthesized, and their structures have been characterized by X-ray single crystallography. The skeletal structures consist of one 20-membered metallamacrocycle, two 5-membered metallacycles, and four pyridyl groups. The local geometry around the palladium(II) ion approximates to a typical square planar arrangement with four nitrogen donors. Delicate difference in catalytic effects on hydrogenation was investigated based on the structure of catalyst and substrates.