• 공업화학
• /
• 제10권2호
• /
• pp.183-189
• /
• 1999

$H_2S$를 제거를 위한 아연계 복합금속산화물 탈황제를 제조하고 반응특성을 연구하였다. 최적 황화반응 온도인 $650^{\circ}C$의 고정층에서 탈황-재생의 연속 cycle에 따른 반응성을 관찰하였다. 내마모성 향상을 위한 구형입자의 탈황제를 제조하기 위해 Granulation방법을 이용하였다. XRD와 XPS분석에 의해 zinc titanate결정생성을 확인하였고 소성조건에 따른 탈황제의 특성을 분석하기 위해 mercury porosimetry와 BET분석을 행하였다. Cycle이 증가함에 따라 고온에서의 zinc loss와 sintering, cracking, 그리고 spalling에 의한 탈황제의 확산저항의 증가로 인해 반응성은 떨어졌다.

• 대한화학회지
• /
• 제37권8호
• /
• pp.735-743
• /
• 1993

Cofacial bis-cobalt tetraphenylporphyrin(Co-TPP) 유도체 화합물들이 수식된 유리질 탄소 전극과 carbon microelectrode을 작업 전극으로 사용하여 여러가지 pH 용액에서 순환 전압전류법 및 시간 전류법에 의해 산소의 환원반응을 조사하였다. 산성용액에서 monomer인 cobalt tetraphenylporphyrin 화합물이 수식된 전극에서 산소의 환원반응경로는 중간 생성물인 H$_2$O$_2$로 가는 2전자 반응으로, dimer인 cofacial bis-cobalt tetraphenylporphyrin 유도체 화합물들이 수식된 전극에서는 최종 생성물인 H$_2$O로 가는 4전자 반응으로 진행되었다. 이와 같은 산소의 환원반응은 전체적으로 비가역적이며 확산지배적인 반응으로 주어졌다. pH 변화에 따른 산소의 환원전위는 pH 13에서 pH 4 까지는 직선관계가 성립하였으나 강한 산성용액에서는 이들 관계가 성립하지 않았다. 산성용액에서 산소의 환원전위는 알몸 유리질 탄소전극에서 보다 monomer Co-TPP 화합물이 수식된 유리질 탄소전극에서는 400 mV만큼, dimer Co-TPP 화합물이 수식된 전극에서는 750 mV 만큼 더 양전위 방향으로 이동되었다.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.399-408
• /
• 2001

Tooth bleaching has been prevailing recently for its ability to recover the color and shape of natural teeth without reduction of tooth material. However, it has been reported that bleaching procedure adversely affects the adhesive bond strength of composite resin to tooth. At the same time the bond strength was reported to be regained by application of some chemical agents. The purpose of this in vitro study was to investigate the effect of the removal of residual peroxide on the composite- enamel adhesion and also evaluated fracture mode between resin and enamel after bleaching. Sixty extracted human anterior and premolars teeth were divided into 5 groups and bleached by combined technique using of office bleaching with 35 % hydrogen peroxide and matrix bleaching with 10% carbamide peroxide for 4 weeks. After bleaching, the labial surfaces of each tooth were treated with catalase, 70% ethyl alcohol, distilled water and filled with composite resin. Shear bond strength was tested and the fractured surfaces were also examined with SEM. Analysis revealed significantly higher bond strength values. (p＜0.05) for catalase-treated specimens, but water-treated specimens showed reduction of bond strength, alcohol- treated specimens had medium value between the two groups(p＜0.05). The fracture mode was shown that the catalase group and the alcohol group had cohesive failure but the water sprayed group had adhesive failure. It was concluded that the peroxide residues in tooth after bleaching seems to be removed by gradual diffusion and the free radical oxygen from peroxide prevents polymerization by combining catalyst in the resin monomer. Therefore it may be possible to eliminate the adverse effect on the adhesion of composite resin to enamel after bleaching by using water displacement solution or dentin bonding agent including it for effective removal of residual peroxide.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.495-502
• /
• 2014

Fast recovery diodes (FRDs) were developed using the $p^{{+}{+}}/n^-/n^{{+}{+}}$ epitaxial layers grown by low temperature epitaxy technology. We investigated the effect of electrostatic discharge (ESD) stresses on their electrical and switching properties using current-voltage (I-V) and reverse recovery time analyses. The FRDs presented a high breakdown voltage, >450 V, and a low reverse leakage current, < $10^{-9}$ A. From the temperature dependence of thermal activation energy, the reverse leakage current was dominated by thermal generation-recombination and diffusion, respectively, at low and high temperature regions. By virtue of the abrupt junction and the Pt drive-in for the controlling of carrier lifetime, the soft reverse recovery behavior could be obtained along with a well-controlled reverse recovery time of 21.12 ns. The FRDs exhibited excellent ESD robustness with negligible degradations in the I-V and the reverse recovery characteristics up to ${\pm}5.5$ kV of HBM and ${\pm}3.5$ kV of IEC61000-4-2 shocks. Likewise, transmission line pulse (TLP) analysis reveals that the FRDs can handle the maximum peak pulse current, $I_{pp,max}$, up to 30 A in the forward mode and down to - 24 A in the reverse mode. The robust ESD property can improve the long term reliability of various power applications such as automobile and switching mode power supply.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권1호
• /
• pp.19-33
• /
• 1997

The high oxidants, which occur the daily maximum concentrations in the afternoon, are transported into the other region via long range transport mechanisms or trapped within the shallow mixing boundary layer and then removed physically (deposition, transport by mountain wind, etc.) and chemically (reaction with local sources). Therefore, modeling formation of photochemical oxidants requires a complex description of both chemical and meteorological processes. In this study, as a part of air quality studies, we reviewed various aspects of photochemical modeling on the basis of currently available literature. The result of the review shows that the model is based on a set of coupled continuity equations describing advection, diffusion, transport, deposition, chemistry, emission. Also photochemical oxidant models require a large amount of input data concerned with all aspects of the ozone life cycle. First, emission inventories of hydrocarbon and nitrogen oxides, with appropriate spatial and temporal resolution. Second, chemical and photochemical data allowing the quantitative description of the formation of ozone and other photochemically-generated secondary pollutants. Third, dry deposition mechanisms particularly for ozone, PAN and hydrogen peroxide to account for their removal by absorption on the ground, crops, natural vegetation, man-made and water surfaces. Finally, meteorological data describing the transport of primary pollutants away from their sources and of secondary pollutants towards the sensitive receptors where environmental damage may occur. In order to improve our present study, shortcomings and limitation of existing models are pointed out and verification process through observation is emphasized.

• 대한화학회지
• /
• 제37권4호
• /
• pp.462-469
• /
• 1993

Cofacial bis-cobalt tetraphenylporphyrin 유도체 화합물들이 수식된 유리질 탄소 전극과 microelectrode에서 순환 전압 전류법 및 시간 전류법에 의해 산소의 환원 반응을 조사하였다. Microelectrode를 사용하여 시간-전류법에 의해 얻은 전자수 n값들은 유리질 탄소 전극을 사용하여 순환 전압 전류법들에 의해 얻은 결과들과 다소 다른 값으로 나타났다. 알카리성 용액에서 monomer인 cobalt tetraphenylporphyrin 화합물이 수식된 전극에서 산소의 호나원 반응 경로는 중간 생성물인 $H_2O_2$로 가는 2 전자반응으로 진행되었고, dimer인 cofacial bis-cobalt tetraphenylporphyrin 유도체 화합물들이 수식된 전극에서는 최종 생성물인 $H_2O$로 가는 4 전자 반응으로 진행되었다. 이와 같은 산소의 환원 반응은 전체적으로 비가역적으로 확산 지배적인 반응으로 주어졌다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.276-279
• /
• 2004

Plasma enhanced chemical vapor deposition (PECVD) of silicon nitride (SiN) is a proven technique for obtaining layers that meet the needs of surface passivation and anti-reflection coating. In addition, the deposition process appears to provoke bulk passivation as well due to diffusion of atomic hydrogen. This bulk passivation is an important advantage of PECVD deposition when compared to the conventional CVD techniques. A further advantage of PECVD is that the process takes place at a relatively low temperature of 300t, keeping the total thermal budget of the cell processing to a minimum. In this work SiN deposition was performed using a horizontal PECVD reactor system consisting of a long horizontal quartz tube that was radiantly heated. Special and long rectangular graphite plates served as both the electrodes to establish the plasma and holders of the wafers. The electrode configuration was designed to provide a uniform plasma environment for each wafer and to ensure the film uniformity. These horizontally oriented graphite electrodes were stacked parallel to one another, side by side, with alternating plates serving as power and ground electrodes for the RF power supply. The plasma was formed in the space between each pair of plates. Also this paper deals with the fabrication of multicrystalline silicon solar cells with PECVD SiN layers combined with high-throughput screen printing and RTP firing. Using this sequence we were able to obtain solar cells with an efficiency of 14% for polished multi crystalline Si wafers of size 125 m square.

• 멤브레인
• /
• 제29권1호
• /
• pp.30-36
• /
• 2019

본 연구에서는 titanium nitride (TiN) 나노 섬유와 poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT-PSS) 전도성 고분자로 이루어진 전극과 poly(vinyl alcohol) (PVA) 기반 고분자 전해질 분리막을 이용하여 슈퍼 캐퍼시터를 제조하였다. TiN 나노 섬유의 경우 높은 전기 전도도와 이차원적 구조로 인한 스케폴드 효과를 기대할 수 있다는 점에서 전극 물질로 사용되었다. PEDOT-PSS 전도성 고분자는 수소 이온과 산화-환원 반응을 통해 보다 높은 정전용량을 나타낼 수 있으며 용액상에 분산이 용이해 유무기 복합제를 형성하기에 적합하였다. PVA 기반의 고분자 전해질 분리막은 기존의 액상의 전해질의 문제인 외부 충격에 대한 안정성을 확보할 수 있으며 염으로 사용된 $H_3PO_4$의 경우 수소 이온은 빠른 확산으로 인해 캐퍼시터의 충방전 효율에 이점이 있다. 본 연구에서 보고된 PEDOT-PSS/TiN 슈퍼캐퍼시터의 정전용량은 약 75 F/g으로 기존의 탄소기반 캐퍼시터에 비해 큰 폭으로 증가한 값이다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권2호
• /
• pp.169-179
• /
• 1998

This paper was performed to estimate interrelations between humus level of sediments and nutrient release from sediments in Dae-cheong reservoir. For investigations, sediments were sampled in June and October, in 1997 at fish farms, embayment, and the main stream of Dae-cheong reservoir. Items for investigation are as follows; water content, weight loss on ignition(IG), porosities of sediments, contents of element such as hydrogen, nitrogen, carbon, and nutrient release rates. Water contents and porosities were measured to conjecture the physical trait and grain size trait. Weight loss on ignition was measured to determine the contents of organic substance. For determination of the humus level of sediments, carbon and nitrogen contents were measured by elemental analyzer. As a result of elemental analysis, C/N ratio was determined in the range of $3.0\~13.1$. From the elemental analysis, humus level of Dae-cheong reservoir sediment was estimated from mesohumic state to oligotrophic state. For the determination of nutrient release rate, $PO_4-P$ and $NH_4-N$ concentrations of interstitial water and overlying water were measured. By using the concentration difference between interstitial water and overlying water and using the Fick's diffusion law, the release rates of phosphorus and nitrogen from the sediment samples were calculated. Release rates of nutrients which directly influence to the water quality were $0.05\~8.63mgP/m^2day$ and $4.99\~36.56mgP/m^2day$. It was found that release rate was measured higher in the 1st sampling period than in the 2nd sampling period. For the determination of phosphorus content in sediment, TPs were measured in 807\~1542{\mu}g/g$ in the 1st samling period and $677\~5238{\mu}g/g$ in the End samling period. Phosphorus release rate and phosphorus content were not interrelated each other.

• 대한기계학회논문집A
• /
• 제39권9호
• /
• pp.909-916
• /
• 2015

본 연구는 디젤-과산화수소 에멀젼연료의 충돌분무를 대상으로 과산화수소의 혼합비가 증발분무 거동특성에 미치는 영향을 조사하였다. 에멀젼연료의 증발을 위해 온도조절이 가능한 가열판을 사용하여 온도를 $150^{\circ}C$, $200^{\circ}C$ 및 $250^{\circ}C$로 각각 설정하였고, 연료 분사압력을 400bar, 600bar, 800bar 및 1000bar로 설정하여 분사압력이 에멀젼연료의 증발특성에 미치는 영향을 확인하였다. 에멀젼연료의 혼합을 위 한 계면활성제로 span80과 tween80을 9:1의 비율로 혼합하여 에멀젼연료 전체 체적의 3%로 고정하였고 과산화수소의 혼합비율을 EF(Emulsified Fuel)0, EF2, EF12 및 EF22로 설정하여 디젤연료와 혼합하였다. 또한 에멀젼연료 증발 충돌분무의 가시화를 위해 슐리렌방법을 적용하였다. 본 연구의 결과로서 충돌하는 가열판의 온도와 분사압력이 높을수록 에멀젼연료 증발 촉진으로 연료 기상의 확산이 활발해지는 것을 알 수 있었다. 이러한 결과로부터 실제엔진에 에멀젼연료를 사용할 경우 연료 내 과산화수소 증발에 의한 연소실 온도 저하효과와 함께 보다 신속한 혼합기 형성은 엔진배출물의 감소를 일으키는 것으로 기대된다.