• The Plant Pathology Journal
• /
• v.17 no.3
• /
• pp.174-179
• /
• 2001

The plant growth-promoting Pseudomonas strains, WR8-3 (Pseudomonas fluorescens), WR9-11 (Pseudomonas sp.) and WR9-16 (P.putida), which induced resistance systematically in watermelon to gummy stem rot were investigated on their induced systemic resistance(ISR)-related characteristics. The pyoverdine production was repressed in the standard succinate medium by increasing the concentration of $\textrm{FeCL}_3$. But the iron-binding ability on chrome azurol S agar media (CAS) was observed only in the strains, WR8-3 and WR9-16. When the two strains were mutated, the resulting iron-binding siderophore-negative mutants, WR8-3m and WR 9-16m, failed to promote the growth of watermelon and to induce resistance. The strains, WR8-3 and WR 9-16, slightly inhibited the growth of Didymella bryoniae at a low concentration of $\textrm{FeCL}_3$ on Kong's medium B, but not to exert control dffect. The strain WR9-11 showed antagonism in the concentration of $\textrm{FeCL}_3$ from 0 to $1,000\mu\textrm{M}$. When the crude lipoplysaccharide of each strain was treated in the rhizosphere of watermelon, mean lesion area was similar to that of the untreated control. The strains, WR9-11 and WR9-16 produced some level of hydrogen cyanide (HCN). Salicylic acid production was not detected in all of the strains.

• Journal of Microbiology
• /
• v.44 no.2
• /
• pp.185-191
• /
• 2006

The photosynthetic bacterium, Rhodospirillum rubrum S1, when grown under anaerobic conditions, generated three different types of catalases. In this study, we purified and characterized the highest molecular weight catalase from the three catalases. The total specific catalase activity of the crude cell extracts was 88 U/mg. After the completion of the final purification step, the specific activity of the purified catalase was 1,256 U/mg. The purified catalase evidenced an estimated molecular mass of 318 kDa, consisting of four identical subunits, each of 79 kDa. The purified enzyme exhibited an apparent Km value of 30.4 mM and a Vmax of 2,564 U against hydrogen peroxide. The enzyme also exhibited a broad optimal pH $(5.0{\sim}9.0)$, and remained stable over a broad temperature range $(20^{\circ}C{\sim}60^{\circ}C)$. It maintained 90% activity against organic solvents (ethanol/chloroform) known hydroperoxidase inhibitors, and exhibited no detectable peroxidase activity. The catalase activity of the purified enzyme was reduced to 19 % of full activity as the result of the administration of 10 mM 3-amino-1,2,4-triazole, a heme-containing catalase inhibitor. Sodium cyanide, sodium azide, and hydroxylamine, all of which are known heme protein inhibitors, inhibited catalase activity by 50 % at concentrations of $11.5{\mu}M,\;0.52{\mu}M,\;and\;0.11{\mu}M$, respectively. In accordance with these findings, the enzyme was identified as a type of monofunctional catalase.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.78-88
• /
• 2022

Objectives: To develop the smart sensor to protect worker's health from chemical exposure by adopting ICT (Information and Communications Technology) technologies. Methods: To develope real-time chemical exposure monitoring system, IoT (Internet of Things) sensor technology and regulations were reviewed. We developed and produced smart sensor. A smart sensor is a system consisting of a sensor unit, a communication unit, and a platform. To verify the performance of smart sensors, each sensor has been certified by the Korea Laboratory Accreditation Scheme (KOLAS). Results: Chemicals (TVOC; Total Volatile Organic Compounds, Cl₂: Chlorine, HF: Hydrogen fluoride and HCN: Hydrogen cyanide) were selected according to a priority logic (KOSHA Alert, acute poisoning statistics, literature review). Notifications were set according to OEL (occupational exposure limit). Sensors were selected based on OEL and the capabilities of the sensors. Communication is designed to use LTE (Long Term Evolution) and Wi-Fi at the same time for convenience. Electronic platform were applied to build this monitoring system. Conclusions: Real-time monitoring system for OEL of hazardous chemicals in workplace was developed. Smart sensor can detect chemicals to complement monitoring of traditional workplace environmental monitoring such as short term and peak exposure. Further research is needed to expand the scope of application, improve reliability, and systematically application.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.10
• /
• pp.1366-1376
• /
• 2009

Effect of sulfur (S) on utilization efficiency of fresh cassava foliage and cassava hay in dairy cows was evaluated using thirty-two $1^{st}-2^{nd}$ lactation Holstein-Friesian crossbred dairy cows. The experimental treatment was a 2${\times}$2 factorial arrangement in a randomized complete block design (RCBD) using two roughages (rice straw+fresh cassava foliage (FCF) and rice straw+cassava hay (CH)) and two elemental sulfur (S) levels (0.15 and 0.4% S of dry matter (DM)), respectively. Four dietary treatments (FCF+0.15, FCF+0.4, CH+0.15 and CH+0.4) were offered ad libitum in the form of a total mixed ration (TMR) with concentrate to roughage (chopped rice straw+chopped cassava foliage) ratio at 60:40. Fresh cassava foliage or cassava hay resulted in similar dry mater intake, rumen ecology parameters, total tract digestibility, blood chemistry, milk production and composition. However, HCN intake, blood and milk thiocyanate concentration were significantly higher (p<0.01) in cows fed fresh cassava foliage with no sign of potential toxicity. Dry matter intake, body weight changes, molar percentage of propionate in rumen, neutral detergent fiber (NDF) digestibility and nitrogen (N) retention of cows tended to be increased while DM digestibility (65.6, 72.7, 68.6 and 72.1% of total DM intake for the respective treatments), rumen bacteria population (1.4, 1.7, 1.6 and $1.7{\times}10^{11}$ cell/ml for respective treatments), fungal zoospore population (0.4, 0.6, 0.4 and $0.5{\times}10^{6}$ cell/ml for respective treatments), urinary allantoin (25.3, 28.0, 26.3 and 27.6 g/d for respective treatments), microbial N yield (136.0, 154.6, 142.8 and 151.3 g N/d for respective treatments) and milk protein content (3.4, 3.5, 3.2 and 3.5% for respective treatments) were significantly (p<0.05) higher in cows fed on supplemented sulfur at 0.4% of DM in comparison with 0.15% S-supplemented diets. Based on these results, it is concluded that cassava foliage could be used as a portion of roughage for dairy cows and supplementation of S would be nutritionally beneficial.

• Toxicological Research
• /
• v.29 no.2
• /
• pp.91-98
• /
• 2013

Armeniacae semen (AS) has been considered a toxic herb in the Korean medicine as it contains hydrogen cyanide and amygdalin, especially in its endocarp. Therefore, prebrewed AS that is devoid of endocarp has been traditionally used. In the present study, amygdalin content of the prebrewed AS was significantly lower ($2.73{\pm}0.32{\mu}g/ml$; p<0.01) than the content in the extract that contained the endocarps ($28.50{\pm}6.71{\mu}g/ml$); amygdalin content corresponded to 10% of the extract in the present study. Because of single oral dose toxicity of prebrewed AS according to the recommendation of Korea Food and Drug Administration Guidelines (2009-116, 2009), which was based on single oral dose toxicity study of prebrewed AS, mortality due to toxic principles was significantly reduced. In this study, 2,000 mg/kg of prebrewed AS led to death of 1 female rat and 1 male rat at the end of 2 hr of administration. Based on these results, the 50% lethal dose in both male and female rats was determined to be 9279.5 mg/kg. Seizure, loss of locomotion, and increases in respiration and heart rate were observed as prebrewed AS treatment-related toxicological signs; these signs were restrictedly manifested in the prebrewed AS (2,000 mg/kg)-treated rats. In addition, no changes were observed in body weight, organ weight, gross features, and histopathological parameters with 2,000 mg/kg of AS in both male and female rats. These findings serve as direct evidence that amygdalin in AS is the toxic principle, which can be reduced by the traditional prebrewing method involving the exclusion of endocarp.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.422-428
• /
• 2014

Endophytic bacterial strains from root tissue of strawberry were screened for their efficacy in growth improvement and control of Phytophthora blight disease of chili pepper plant under greenhouse condition. Plants treated with the strain EP103, identified as Pseudomonas fluorescens, showed growth improvement in terms of fresh weight and root length compared to the untreated control and other endophytic strains. When challenged with Phytophthora capsici, there was significant reduction of disease in EP103 treated plants with an efficacy of 78.7%. There was no direct inhibition of the target pathogen by EP103 when tested under in vitro antibiosis assay. Analysis of differential expression of selected marker genes for induced systemic resistance (ISR) in plants treated with EP103 and challenged with P. capsici showed up-regulation of PR1 and PR10 pathogenesis-related (PR) proteins. PCR analysis showed that EP103 produced secondary metabolites such as pyoluteorin, pyrrolnitrin, hydrogen cyanide and orfamide A. This study indicated the potential of endophytic P. fluorescens strain EP103 as an efficient biocontrol agent against P. capsici in chili pepper plant.

• The Korean Journal of Mycology
• /
• v.44 no.1
• /
• pp.36-47
• /
• 2016

This study was conducted to evaluate five different strains of rhizobacterial isolates viz. PA1, PA2, PA4, PA5 and PA12 for biological control against Colletotrichum acutatum, C. coccodes, C. gloeosporioides, C. dematium, Botrytis cinerea, Rhizoctonia solani, Sclerotinia minor and Fusarium sp. In vitro inhibition assay was performed on three different growth mediums, potato dextrose agar (PDA), tryptic soy agar (TSA), and PDA-TSA (1:1 v/v) for the selection of potential antagonistic isolates. According to the result, isolate PA2 showed the highest inhibitory effect with 65.5% against C. coccodes on PDA and with 96.5% against S. minor on TSA. However, the same isolate showed the highest inhibition with 58.5% against C. acutatum on PDA-TSA. In addition, an in vivo experiment was performed to evaluate these bacterial isolates for biological control against fungal pathogens. Plants treated with bacteria were analyzed with phytopathogens and plants inoculated with phytopathogens were treated with isolates to determine the biological control effect against fungi. According to the result, all five isolates tested showed inhibitory effects against phytopathogens at various levels. Mode of action of these rhizobacterial isolates was evaluated with siderophore production, protease assay, chitinase assay and phosphate solubilizing assay. Bacterial isolates were identified by 16S rDNA sequencing, which showed that isolates PA1 and PA2 belong to Bacillus subtilis, whereas, PA4, PA5, and PA12 were identified as Bacilus altitudinis, Paenibacillus polymyxa and Bacillus amyloliquefaciens, respectively. Results of the current study suggest that rhizobacterial isolates can be used for the plant growth promoting rhizobacteria (PGPR) effect as well as for biological control of various phytopathogens.

• Korean Journal of Microbiology
• /
• v.48 no.1
• /
• pp.16-21
• /
• 2012

Since many pesticides cause various health and environmental problems, alternative measures to replace them are needed, and the bacteria producing the antifungal substances can be one of them. In this study, several rhizobacteria were isolated and their antifungal activities against some important plant pathogenic fungi were examined. Pseudomonas otitidis TK1 and Paenibacillus peoriae RhAn32 inhibited the growth of Fusarium oxysporum f. sp. niveum and F. oxysporum f. sp. lycopersici by 49.8% and 45.6%, and 45.1% and 48.3%, respectively compared to those of the control. P. peoriae RhAn32 also decreased the growth of F. oxysporum f. sp. raphani by 37.5%. This growth inhibition might be due to the production of antifungal substances, such as siderophore, hydrogen cyanide and chitinase, which were produced by these rhizobacteria. P. otitidis TK1 also produced plant growth hormones indole acetic acid and indole butyric acid at $293.41{\mu}g/mg$ protein and $418.53{\mu}g/mg$ protein, respectively. When P. otitidis TK1 and B. cereus TK2 were inoculated together with F. oxysporum f. sp. lycopersici to the 4 weeks grown tomato seedlings and incubated additional 8 weeks, the stem lengths of tomato increased up to 45.7% and 55.3% and root lengths were raised to 64.9% and 60.8%, respectively than those of the control group. The wet weights increased by 118% and 182%, respectively compared to the control group.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.23-32
• /
• 2017

Foam block, popularized as the self-interior goods, is susceptible to fire since the main material is the polyethylene flammable synthetic resin. However, it is widely used in homes, offices, and multi-use facilities. In order to understand the fire characteristics of the foam block, two kinds of foam blocks sold in the market (non-fire retardant and fire retardant) were evaluated according to standard of KS F 5660-1 (Reaction to fire test). In addition, the hazard analysis of the gas generated by the combustion of the specimen was performed using the FTIR gas analyzer. The cone calorimeter test showed that the ignition and flame combustion of both two specimens were burned as soon as the radiant heat blocking device was removed, and it was confirmed that the flame could become a rapid propagation factor during the fire. The analysis of the combustion gas through the FTIR gas analyzer showed that both the carbon dioxide and carbon monoxide classified as the common combustion gases and the acrolein, ammonia, and hydrogen cyanide causing serious damage to the human body were detected substantially. This study showed that a foam block product has high ignitionability and generates toxic gases. Hence, it is urgently required to establish the standards used for properly classifying the combustion characteristics of the material on the basis of the use conditions of a foam block product and to prepare the standards on the purpose of use.

• Journal of the Korean institute of surface engineering
• /
• v.13 no.3
• /
• pp.146-154
• /
• 1980

The effects of various electrodeposition conditions (deposition temperature and cathode current density) on preferred orientation and microhardness of electrodeposited Ni-Sn and Sn-Zn alloys were studied. At deposition temperatures from 25$^{\circ}$ to 95$^{\circ}C$ and constant cathode current density of 270 and 530 A/$m^2$ Ni-Sn and Sn-Zn were codeposited in chloride-fluoride acid and stannate-cyanide alkaline electrolyte bath respectively. Ni-Sn alloy deposited at temperatures from 25$^{\circ}$ to 35$^{\circ}C$ was composed of single phase of $Ni_3Sn_4$ with 73 wt.% Sn and the one deposited at temperatures from 45$^{\circ}$ to 95$^{\circ}C$ was made of multiphase mixture of NiSn, $Ni_3Sn_2$ and $Ni_3Sn_4$ with nearly equiatomic composition (65.5 wt.% Sn). The random orientation of thermody-namically metastable NiSn phase (hexagonal structure) predominated at deposition temperature range 25$^{\circ}$-45$^{\circ}C$, and the strong (110) preferred orientation was found at 65$^{\circ}$-85$^{\circ}C$ and then disappeared again at 95$^{\circ}C$. The microhardness of Ni-Sn deposits increased with deposition temperature up to 85$^{\circ}C$, and then decreased at constant cathode current density. The preferred orientation and the maximum microhardness were discussed in terms of lattice contractile stress which result from desorption of hydrogen atom absorbed in deposit lattice. The Sn content of Sn-Zn alloy deposits increased with deposition temperature up to 75$^{\circ}C$, and then decreased at constant cathode current density of 530 A/$m^2$. It also decreased with cathode current density up to 530 A/$m^2$, and then increased at constant deposition temperature of 25$^{\circ}C$. Sn-Zn alloy deposits were composed of two-phase mixture of ${beta}$-Sn and Zn. The preferred orientations of ${beta}$-Sn (tetragonal structure) changed with deposition temperature. The microhardness of Sn-Zn deposits decreased with deposition temperature. It also increased with cathode density up to 530 A/$m^2$, and then decreased at constant deposition temperature of 25$^{\circ}C$. The microhardness of Sn-Zn deposits was observed to be determinded more by the Sn content than by the preferred orientation.