• 대한금속재료학회지
• /
• 제47권6호
• /
• pp.372-377
• /
• 2009

We report on hysteresis behavior in the electrical resistance-hydrogen concentration of Pd thin films. The variation of the electrical resistance has been investigated during the process of absorption and desorption of hydrogen gas ($H_{2}$) as a function of thickness of Pd thin films. The hysteresis behavior in the electrical resistance with $H_{2}$ concentration was found for Pd thin films and consists of $\alpha$ phase, ${\alpha}+{\beta}$ phase, and $\beta$ phase regions. The sensitivity of Pd thin films with $H_{2}$ concentration was found to follow Sieverts' law in the $\alpha$ phase region. However, the sensitivity was observed to increase abruptly with $H_{2}$ concentration in the ${\alpha}+{\beta}$ phase co-exist region. This is because Pd-H interaction is stronger in the $\beta$ phase than in the $\alpha$ phase and needs a higher concentration gradient as a driving force to desorb. The formation of the $\beta$ phase also was observed to cause the structural change because of the lattice expansion during absorption. The hysteresis height and the trace of structural change were affected by the thickness of the Pd film. As the film becomes thinner, the hysteresis height becomes lower and the amount of delamination on the surface becomes smaller. For films thinner than 20 nm in thickness, the delamination was not found but electrical resistance hysteresis was still observed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2007년도 제32회 학술대회 초록집
• /
• pp.75-75
• /
• 2007

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.393.1-393
• /
• 2001

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제34회 동계학술대회 초록집
• /
• pp.166-166
• /
• 2008

• 드라이브 ㆍ 컨트롤
• /
• 제6권2호
• /
• pp.40-50
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1879-1883
• /
• 2011

The electronic structure and bonding in $Ti_2Pd$ and $Pd_2Ti$ alloys with and without hydrogen as an interstitial atom were studied by performing extended Huckel tight-binding band calculations. The hydrogen absorption near an octahedral site is found to be a favorable process in $Ti_2Pd$ rather than in $Pd_2Ti$. In metal hydrides, the metal-hydrogen bonding contribution is crucial to the stability of the system. The stronger interaction of hydrogen with Ti atoms in $Ti_2PdH_2$ than with Pd atoms in $Pd_2TiH_2$ is analyzed by perturbation theory.

• 한국수소및신에너지학회논문집
• /
• 제7권1호
• /
• pp.71-79
• /
• 1996

Yttrium thin film, 580nm thick, was prepared by electron beam evaporation. Film was hydrogenated room temperature upto 40 bar hydrogen pressure, without any activation process. Hydrogen concentration was determined by a quartz-crystal microbalance(QCM) method. YH2.9 sample was made without any pulverization. Electrical resistance was measured by four-point DC method in the temperature range between room temperature and 30K for various hydrogen concentration, x=0 to 2.9 of YHx sample. Temperature dependent resistance of YH2.9 shows low temperature minimum at 105K, the metal-semiconductor transition at 260K, and a hystersis above 210K.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.25-31
• /
• 2018

To apply Sievert's type apparatus to thermal analysis of hydrogen absorption materials, the dehydrogenation of $LaNi_5$ system was investigated. As the initial wt% of hydrogen was increased from 0.44 to 1.24 wt%, the peak temperature of evolution rate shifted to higher temperature. However, with the initial wt% of hydrogen higher than 0.95 wt%, the peak temperature of evolution rate did not change. As the heating rate was increased, the peak temperature increased; the peak temperatures for heating rates 0.5, 1.0 and 1.5 K/min were 262.2, 264.1, and 265.9 K respectively. The Sievert's type automatic apparatus can be successively applied to the thermal analysis of $LaNi_5$ hydride.

• 한국분말재료학회지
• /
• 제9권2호
• /
• pp.83-88
• /
• 2002

The mechanochemical milling of Mg and $Mg_2Ni$ alloys were carried out to examine the enhancement of hydrogen storage properties of Mg alloys. The hydroge characteristics of the ball-milled products were evaluated with a Sievert-type apparatus and electrochemical test. Various intermediate compounds were obtained by chemical reactions induced during the ball milling of Mg of $Mg_2Ni$ alloys with C, Ni, $Ni_2Cl$ and $Ca_2Cl$. The system of $Mg_2Ni$ with 10 wt% C improved markedly the kinetics of hydrogen absorption, while the hydrogen capacities were practically unchanged. The hydrogen storage alloys such as Mg-Ca can be successfully.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.407-413
• /
• 2006

본 연구에서는 산업폐기물인 플라이애쉬를 이용하여 악취물질인 황화수소를 효과적으로 제거하기 위해 입자형태로 제조하여 다양한 실험조건 하에서 제거효과를 관찰하였다. 입자형태로 제조하기 위한 최적조건을 선정하기 위해 플라이애쉬 함량, 시멘트 함량, 함수비, 발포제의 양을 변화시켜 공시체를 제조하였으며, 각 공시체에 대해 비중, 흡수율, 압축강도의 값을 측정하였다. 이들 측정값과 실험 시 편의사항을 고려하여 악취제거 실험에 사용될 시료를 선정하였으며, 회분식 및 컬럼실험을 통해 황화수소의 제거양상을 측정하였다. 본 연구조건 하에서의 황화수소 제거율은 사용된 플라이애쉬 입자의 양과 정비례의 관계를 보여주었으며, 수분 첨가 시 황화수소 제거율이 증가하는 것을 확인하였다.