• The Korean Journal of Physiology and Pharmacology
• /
• v.25 no.3
• /
• pp.239-249
• /
• 2021

The present study explored the therapeutic potential of hydrogen sulfide (H2S) in restoring aging-induced loss of cardioprotective effect of remote ischemic preconditioning (RIPC) along with the involvement of signaling pathways. The left hind limb was subjected to four short cycles of ischemia and reperfusion (IR) in young and aged male rats to induce RIPC. The hearts were subjected to IR injury on the Langendorff apparatus after 24 h of RIPC. The measurement of lactate dehydrogenase, creatine kinase and cardiac troponin served to assess the myocardial injury. The levels of H2S, cystathionine β-synthase (CBS), cystathionine γ-lyase (CSE), nuclear factor erythroid 2-related factor 2 (Nrf2), and hypoxia-inducible factor (HIF-1α) were also measured. There was a decrease in cardioprotection in RIPC-subjected old rats in comparison to young rats along with a reduction in the myocardial levels of H2S, CBS, CSE, HIF-1α, and nuclear: cytoplasmic Nrf2 ratio. Supplementation with sodium hydrogen sulfide (NaHS, an H2S donor) and l-cysteine (H2S precursor) restored the cardioprotective actions of RIPC in old hearts. It increased the levels of H2S, HIF-1α, and Nrf2 ratio without affecting CBS and CSE. YC-1 (HIF-1α antagonist) abolished the effects of NaHS and l-cysteine in RIPC-subjected old rats by decreasing the Nrf2 ratio and HIF-1α levels, without altering H2S. The late phase of cardioprotection of RIPC involves an increase in the activity of H2S biosynthetic enzymes, which increases the levels of H2S to upregulate HIF-1α and Nrf2. H2S has the potential to restore aging-induced loss of cardioprotective effects of RIPC by upregulating HIF-1α/Nrf2 signaling.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.95-100
• /
• 2016

A method for electrochemical degradation of the perchlorate anion ($ClO_4{^-}$) using mercury film electrode has been studied. Electrochemical method has relatively simple pre-treatment. However, electrochemical method should avoid interference from hydrogen evolution at the applied potential to degradation of perchlorate ion, and thus applied electrode should have large hydrogen overvoltage which suppressed the hydrogen evolution at the working reduction potential to prevent hydrogen evolution. In this study, we used mercury film electrode as a working electrode which has a large overvoltage. Ag / AgCl (sat. NaCl) was used as a reference electrode, and platinum was used as a counter electrode. Mercury film electrode was made by cyclic voltammetry (CV) method. The deposition time was decided as 10 minute, and the stability of the mercury electrode in perchlorate solution was confirmed by CV. The reduction potential of perchlorate was checked by using CV method, and decomposition of perchlorate was performed by using chronoamperometric (CA) method. Also, ion chromatography (IC) was used to confirm the degradation rates of perchlorate.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.917-924
• /
• 2012

The conformational study of glycerol has been carried out using the M06-2X/cc-pVTZ level of theory in the gas phase and the SMD M06-2X/cc-pVTZ level of theory in water in order to understand its conformational preferences and solvation effects. Most of the preferred conformers of glycerol have two $C_5$ hydrogen bonds in the gas phase, as found by the analysis of calorimetric data. It has been known that the solvation drove the hydrogen bonds of glycerol to be weaker and its potential surface to be fatter and that glycerol exists as an ensemble of many feasible local minima in water. The calculated populations of glycerol in the gas phase and in water are consistent with the observed values, which are better than the previously calculated ones at the G2(MP2), CBS-QB3, and SM5.42 HF/6-31G(d) levels of theory.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.272-277
• /
• 2004

The primary aim of this study is to investigate new semi-abrasive free slurry including acid colloidal silica and hydrogen peroxide for copper chemical-mechanical planarization (CMP). In general, slurry for copper CMP consists of colloidal silica as an abrasive, organic acid as a complex-forming agent, hydrogen peroxide as an oxidizing agent, a film forming agent, a pH control agent and several additives. We developed new semi-abrasive free slurry (SAFS) including below 0.5％ acid colloidal silica. We evaluated additives as stabilizers for hydrogen peroxide as well as accelerators in tantalum nitride CMP process. We also estimated dispersion stability and Zeta potential of the acid colloidal silica with additives. The extent of enhancement in tantalum nitride CMP was verified through anelectrochemical test. This approach may be useful for the application of single and first step copper CMP slurry with one package system.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.97-105
• /
• 2000

The stress corrosion cracking(SCC) and hydrogen embrittlement cracking(HEC) characteristics of a weathering steel weldment were investigated in aerated acid-chloride solution. The electrochemical properties of weldment were investigated by polarization test and galvanic corrosion test. Weathering steel did not show passive behavior in the acid-chloride solution. Galvanic corrosion between the weld metal and the base metal was not observed because the base metal was anodic to the weld metal. The slow-strain-rate tests(SSRT0 were conducted at a constant strain rate o 7.87×{TEX}$10^{-7}${/TEX}/s at corrosion potential, and at potentiostatically controlled anodic and cathodic potentials. The weldment of weathering steel was susceptible to both anodic dissolution SCC and hydrogen evolution HEC.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1590-1600
• /
• 2014

Cinchona-based bifunctional catalysts have been extensively employed in the field of organocatalysis due to the incorporation of both hydrogen-bonding acceptors (quinuclidine) and hydrogen-bonding donors (e.g., alcohol, amide, (thio)urea and squaramide) in the molecule, which can simultaneously activate nucleophiles and electrophiles, respectively. Among them, cinchona-derived (thio)urea and squaramide catalysts have shown remarkable application potential by using their bifurcated hydrogen bonding donors in activating electrophilic carbonyls and imines. However, due to their bifunctional nature, they tend to aggregate via inter- and intramolecular acid-base interactions under certain conditions, which can lead to a decrease in the enantioselectivity of the reaction. To overcome this self-aggregation problem of bifunctional organocatalysts, we have successfully developed a series of sulfonamide-based organocatalysts, which do not aggregate under conventional reaction conditions. Herein, we summarize the recent applications of our cinchona-derived sulfonamide organocatalysts in highly enantioselective methanolytic desymmetrization and decarboxylative aldol reactions. Immobilization of sulfonamide-based catalysts onto solid supports allowed for unprecedented practical applications in the synthesis of valuable bioactive synthons with excellent enantioselectivities.

• Journal of Hydrogen and New Energy
• /
• v.8 no.1
• /
• pp.43-47
• /
• 1997

A new type of anode materials in form of nanocrystalline composite powders has been developed that offers the potential for dramatically improved discharge capacity and initial activation rate. The composites are synthesized by ball milling of two components - a major component (basic component) having high hydrogen capacity and a minor component (surface activator) with good electrocatalytic activity. The capacity increase observed by ball milling with surface activator. The ball-milled composite materials are easier to activate than the non ball-milled basic component.

• Journal of the Korean Chemical Society
• /
• v.16 no.3
• /
• pp.135-141
• /
• 1972

In the past years, a number of theories have been published to elucidate the structure of liquid water. common to most of these theories is that water mainly consist of several different kinds of clusters and also hydrogen bonds in water may be bent to some degree. Recentrly, in a series of paper, Jhon and Eyring successfully explained thermodynamic, dielectric, surface and transport properites of water, assuming that it contains small domains of about 46 molecules. According to the theory, the cluster size does not change with temperature, but the cluster concentration changes. In this paper, the potential function for the hydrogen bond, the dispersion energy and dipole-dipole interaction terms. The calculated results show that the domain of nearly 46 molecules is energetically most probable, and its size is independent of temperature. And also, we evaluated the effect of angel variation of the bent hydrogen bond. In addition, the relaxation energy different for ice and water is also explained by this method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.10
• /
• pp.855-859
• /
• 2007

Hydrogen as an energy carrier in fuel cell offers perhaps the largest potential benefits of reduced emissions of pollutants and greenhouse gases. The generation of high-purity hydrogen from hydrocarbon fuels is essential for efficient operation of fuel cell. Reduction of carbon monoxide to an acceptable level of 10ppm involves high temperature and low temperature water gas shift (WGS), followed by selective oxidation of residual carbon monoxide. The WGS reactor was designed and tested in this study to produce hydrogen-rich gas with CO to less than 5000 ppm. In the water gas shift operation, gas emerges from the reformer is taken through a high temperature shift (HTS) catalyst to reduce the CO concentration to about $2{\sim}4%$ followed to about 5000 ppm via a low temperature shift (LTS) catalyst.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.2
• /
• pp.29-35
• /
• 1997

Phenol, often discharged from petroleum and fine chemical industries is potential carcinogen and was classified into priority pollutant by EPA in USA. It causes serious environmental and health problem if discharged to the environment such as soil or aquifer. The removal efficiency of phenol and COD using Fenton treatment(Hydrogen Peroxide and Ferrous Sulfate) was observed and biodegradability (BOD$_{5}$/COD$_{cr}$) of reaction products were also examined. When 50 mg/l of phenol was treated by Fenton's Reagent(50 mg/l of hydrogen peroxide and 900 mg/l of ferrous sulfate), the removal efficiency of phenol and COD was 100% and 80% respectively in 10 minutes, which suggested this method can be used as actual phenol removal process. The initial biodegradability of 500 mg/l phenol solution was 0.7 but decreased as hydrogen peroxide was increased.