• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.401-406
• /
• 2015

게터는 반도체와 초소형 전자패키지 소자 내부의 수소와 수증기 같은 기체를 흡착하여 기기 작동 시 방해 기체를 제거하는 기능을 한다. 본 연구에서는 재료와 공정 측면에서 높은 가격 경쟁력을 갖는 게터로, 실리콘 기판에 올라간 다공성 알루미나 구조체를 제조하는 연구를 진행하였다. 기공의 크기가 조절된 양극산화 알루미나(AAO)는 높은 비표면적을 가지며 표면에 OH-기를 다수 포함하므로 높은 효율을 갖는 수분 흡착제로 사용되었다. 등온 수분 흡탈착 곡선으로 분석한 수분 흡착도는 상대습도 35%일 때 2.02%로 우수한 성능을 나타내었다. 즉, 저온에서 사용가능하며, 추가 열원이 필요하지 않아 박막구조의 소형화가 용이하여 내부 손상 및 오염을 방지할 수 있는 게터재를 합성하였다.

• Journal of Electrochemical Science and Technology
• /
• 제12권3호
• /
• pp.323-329
• /
• 2021

This work presents a contrasting behavior of formic acid oxidation (FAO) on the Pt and Bi deposits on different Pt substrates. Using irreversible adsorption method, Bi and Pt were sequentially deposited on Pt electrodes of nanoparticle (Pt NP) and disk (Pt disk). The deposited layers of Bi and Pt on the Pt substrates were characterized with X-ray photoelectron spectroscopy, transmission microscopy and scanning tunneling microscopy. The electrochemical behaviors and FAO enhancements of Pt NP and Pt disk with deposited Bi only (i.e., Bi/Pt NP and Bi/Pt disk), were similar to each other. However, additional deposition of Pt on Bi/Pt NP and Bi/Pt disk (i.e., Pt/Bi/Pt NP and Pt/Bi/Pt disk) changed the electrochemical behavior and FAO activity in different ways depending on the shapes of the Pt substrates. With Pt/Bi/Pt NP, the hydrogen adsorption was suppressed and the surface oxidation of Pt was enhanced; while with Pt/Bi/Pt disk, the opposite behavior was observed. This difference was interpreted as a stronger interaction between the deposited Bi and Pt on Pt NP than that on Pt disk. The FAO performance on Pt/Bi/Pt NP is much better than that on Pt/Bi/Pt disk, most likely due to the difference in the interaction between the deposited Pt and Bi depending on the shapes of Pt substrates. In designing FAO electrochemical catalysts using Pt and Bi, the shape of a Pt substrate was concluded to be critically considered.

• 대한화학회지
• /
• 제19권5호
• /
• pp.317-324
• /
• 1975

$Na^+,\;Ca^{2+},\;Ni^{2+},\;Al^{3+}$ 이온이 포화된 montmorillonite상에 여러 溫度에서 일어난 $H_2O와\;D_2O$의 氣相吸着에 관하여 연구하였다. 吸着으로 인하여 생긴 OH의 IR 신축진동 band를 computer에 의하지 않고 4개의 Gauss 成分으로 나누었다. 물과 silanol OH기와의 共鳴理論은 $3625cm^{-1}와\;2680cm^{-1}$로 증명되었다. $3400cm^{-1}$와 2475cm 에서의 broad한 吸收는 吸着된 물과 水素結合을 일으키고 있는 silanol OH의 신축진동에 의한 것이었고 $3650cm^{-1}와\;2345cm^{-1}$ band는 吸着된 $H_2O와\;D_2O$에 의한 것이었다. 吸着水와 表面 OH사이의 水素結合은 精電氣的 相互作用에 의한 것임이 밝혀졌다.

• 청정기술
• /
• 제19권2호
• /
• pp.121-127
• /
• 2013

본 연구의 목적은 알럼 슬러지를 사용하여 입상흡착제를 제조하기 위한 압출 공정을 최적화하는 것이다. 함수율과 바인더인 메틸 셀룰로스의 함량이 압출 가능성과 입상흡착제의 물리적 특성에 미치는 영향을 연구하였다. 입상흡착제의 물리적 특성은 질소 흡착실험과 압축 강도 측정을 통해서 분석하였다. 증류수와 알럼 슬러지 가공분말의 비가 63/100인 경우가 입상흡착제의 외형이 원통형으로 잘 성형되었고, 압축강도도 가장 높게 나타났다. 메틸 셀룰로스의 함량을 증가시키면 압축강도가 개선되었으나 비표면적이 감소하였다. 성형된 입상흡착제의 소성과정을 거치면 입상흡착제의 표면적이 크게 증가하여 황화수소의 파과 시간이 획기적으로 증가하였으며, 황화수소 파과 용량은 1,700 mg/g 이상을 얻을 수 있었다.

• 공업화학
• /
• 제2권3호
• /
• pp.262-269
• /
• 1991

${\beta}$-carotene의 오존산화반응을 통하여 불포화 색소물질에 대한 오존의 탈색효과와 반응성분의 변화를 정량적으로 비교하였으며, 카로티노이드계 색소가 주요 발색원인물질인 beeswax 에 대한 오존의 산화반응을 물, 0.5%와 1.0% 수산화나트륨수용액, 20% 와 95% 초산수용액에서 실시하여 각 반응계에 따른 탈색효과를 비교검토하였고, 과산화수소의 첨가효과도 검토하였다. ${\beta}$-carotene의 불포화이중결합의 감소와 탈색효과는 정량적으로 비례하였으며 beeswax의 탈색효과도 잘 일치하는 결과를 얻었다. Beeswax의 탈색효과는 1.0 % 수산화나트륨수용액에서 반응한 것이 가장 우수하였으며. 과산화수소의 첨가(왁스의 2%)시 390 nm 에서의 흡광도가 0.045 로 좋은 탈색효과를 얻을 수 있었다. Beeswax의 탈색에 있어 오존산화반응이 물리흡착보다 효과적이라는 결론을 얻을 수 있었다.

• 한국표면공학회지
• /
• 제43권6호
• /
• pp.297-303
• /
• 2010

The effect of solution acidity and organic additives, polyethylene glycol (PEG), on the trivalent chromium electroplating was systematically investigated in the view point of electroreduction of trivalent chromium ions and solution stability. It was found that solution acidity controlled at pH 2.5 showed the widest current range for bright electrodeposits in the presence of PEG additives, which reduced the local current intensification at high current densities. Through complex interaction between PEG additives and hydrogen ion, that is, solution acidity, electrode potential was moved in the negative direction in the bulk solution, while it shifted in the positive when electric potential was scanned. In conjunction with electrochemical quartz crystal microbalance (EQCM), it was found that PEG additives had a role in promoting the electron transfer to trivalent chromium ion complexes in bulk solution and their adsorption at the electrode surface as well as interfering with hydrogen ion reduction process below pH 2.5. The PEG additives developed the nodular morphology during electroreduction of trivalent chromium ions with the increase of solution acidity and enhanced its current efficiency by maintaining the consumption of complexant, formic acid, at low speed.

• 해양환경안전학회지
• /
• 제7권1호
• /
• pp.7-14
• /
• 2001

The amount of petroleum consumption has been Increased according to the industrialization and It leads to the increase of the possibility of marine oil pollution. In Korea, some countermeasures including oil skimmer, gelling agent and herding agent of oil have been used for the remediation of the pollution. However, most of them have lets of shortcomings in the application under in-situ condition, because they are sensitive to the situation such as geographical feature, the wind and the tide. In reported literature, the natural powdered oil absorbent which is made of peat moss is an effective mean to clean spilled oil from lake or coast. However, the peat moss is a natural resource which is only Produced from a specific cold weather are like Canada. This indicates that the alternative materials which is readily obtained from everywhere are needed for powdered oil absorbent. Therefore. in the study, same natural materials including pine leaves and straw are tested as the alternative materials for the absorbent. The raw materials were dried and treated by heat at various temperature during several Periods and then. shattered by a grain cracking machine. The oil sorption capacity of the prepared materials was compared according to the methods of heat treatment and their sizes. The proportion of hydrogen cyanide to combustion of the absorbents was measured to confirm their final disposal methods. The biodegradability test of the absorbents was carried our to evaluate possibility of a side pollution in the coast. In was found that the heat treatment of pine leaves enhanced the capacity of oil sorption and decreased the water sorption. The maximum oil sorption was observed for the material treated at 18$0^{\circ}C$for 60 min. The amount of hydrogen cyanide from the combustion were 0.09ml/g, 0.07ml/g for pine leaves and straw respectively meaning that the final disposal by combustion might be feasible. The amount or organic carbon extracted from pine leaves during 7 days was up to 0.015g organic carbon from one gram of pine leaves. but the degradation was as fast as for glucose. It is concluded that the pine leaves can be served as a good raw material for the powdered oil absorbent like peat moss.

• 한국수소및신에너지학회논문집
• /
• 제19권3호
• /
• pp.199-208
• /
• 2008

HI decomposition was conducted using Pt/C-based catalysts with a fixed-bed reactor in the range of 573 K to 773 K. To examine the change of the characteristic properties of the catalysts, $N_2$ adsorption analyser, a X-ray diffractometer(XRD), and a scanning electron microscopy(SEM) were used before and after the HI decomposition reaction. the effect of Pt loading on HI decomposition was investigated by $CO_2$-TPD. HI conversion of all catalysts increased as decomposition temperature increased. The XRD analysis showed that the sizes of platinum particle became larger and agglomerated into a lump during the reaction. From $CO_2$-TPD, it can be concluded that the cause for the increase in catalytic activity may be attributed to the basic sites of catalyst surface. The results of both b desorption and gasification reaction showed the restriction on the use of Pt/C-based catalyst.

• 한국수소및신에너지학회논문집
• /
• 제21권1호
• /
• pp.19-25
• /
• 2010

Composites of LSCF($La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$) and CGO (gadolinium doped ceria)-based ceramics are logical candidate cathode materials with CGO electrolytes. LSCF with perovskite structure was synthesized and investigated by Solid State Reaction (SSR) method used as cathode materials for SOFC (solid oxide fuel cell). The optimized temperature was $1100^{\circ}C$ to synthesize $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ with rhombohedral structure. The polarization resistance of the LSCF/CGO (50:50 wt.%) was smaller than that of other composite cathodes. The analysis of the EIS data of LSCF/CGO suggests that the diffusion and adsorption-desorption of oxygen can be the key process in the cathodic reaction.

• 한국응용과학기술학회지
• /
• 제29권4호
• /
• pp.594-598
• /
• 2012

고분자 전해질막 연료전지는 연료극의 연료와 공기극의 공기에 각각 $H_2S$와 $SO_2$이 포함되어 있을 때 그 성능이 심각하게 감소한다. 본 연구는 고분자전해질막 연료전지의 공기극과 연료극에 1 ppm에서 10 ppm의 불순물 가스를 공급하여 전기적 성능측정을 통해 복합적인 황불순물이 단위전지에 미치는 영향을 확인하였다. 최적의 운전조건에서 불순물가스를 피독하였을 때 $SO_2$와 $H_2S$의 농도가 증가할수록 성능이 급격히 감소하였다(단위전지 온도 $65^{\circ}C$, 상대습도 100%). 그리고 황의 흡착은 MEA의 백금 촉매층 표면서 일어나며, 불순물 가스가 MEA에 누적되는 것을 확인하였다. 1, 3, 5, 및 10 ppm 4회의 연속적인 피독 후 연료전지의 성능이 0.71 V에서 0.54 V(76 %)로 감소하였다.