• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.10-16
• /
• 2003

To investigate the jet effect on circulation control, a segment of model was prepared and inserted horizontally across the test section of the cavitation tunnel. The hydrodynamic forces acting on the model were measured under the 2 dimensional flow behavior. Circulation flow control requires higher flow rate of water jet than boundary layer control does. Jet injection is effective in increasing lift coefficient and the increments reach to 160% in a certain combination of parameters such as an angle of attack, jet flow rate and flap angle. The blown water jet not only reduces form drag but also thrust effect, which is sometimes greater than the form drag in specific conditions.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.421-422
• /
• 2003

면섬유를 가공할 때 가공효과는 면섬유 미세기공에의 가공제 흡착량에 의존한다. 흡착량에 영향을 주는 것은 화학적으로는 가공제와 면섬유 간의 친화력이고, 물리적으로는 가공제의 물 속에서의 크기 즉, hydrodynamic volume이다. 기존 면섬유 가공제의 경우 낮은 분자량을 사용하였으나, 최근 들어 높은 분자량의 가공제를 사용 하는 경향이 있다. 고분자량 가공제의 경우에는 앞서 언급한 것과 같이 가공제의 크기가 가공제의 가공효과에 영향을 미칠 수 있으나, 이에 관련된 연구는 많지 않다. (중략)

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.413-418
• /
• 1995

A computer code to simulate the letdown system was developed to analyze the hydrodynamic transients. It was found that valve plug characteristics have a significant effect on the system stability, and that the plant specific valve control system setpoints should be determined based on the characteristics of procured valves by using a simulation code, before performing the plant startup test. The letdown system instability was evaluated for the feedback to the design of future plants.

• Korea-Australia Rheology Journal
• /
• v.13 no.1
• /
• pp.19-27
• /
• 2001

In this symposium paper, the migration and hydrodynamic diffusion of non-colloidal, spherical particles suspended in polymer solutions are considered under Poiseuille or torsional flows. The migration phenomena in polymer solutions are compared with those in Newtonian fluids and the effect of fluid elasticity is discussed. The experimental results on particle migration in dilute polymer solution reveal that even a slight change in the rheological property of the dispersing medium can induce drastic differences in flow behavior and migration of particles, especially in dilute and semi-concentrated suspensions.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.337-339
• /
• 2001

One-dimensional hydrodynamic modeling of a protostellar flare loop is presented. The model consists of thermally isolated loop connecting the central core and the accretion disk. We found that the conductive heat flux of a flare heated the accretion disk up to coronal temperature and consequently the disk is evaporated and disappeard. This effect may explain the ovserved feature of the repeated flare from the young stellar object YLW 15.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.207-216
• /
• 2002

In this paper, the study on the behavior of the deformation of brittle material, such as concrete, ceramic, was peformed by comparison of Lagrangian technique and Smoothed Particle Hydrodynamics using commercial nonlinear hydrodynamic numerical program, Autodyn_2D. The effect of SPH technique was proved by investigating the behavior of material deformation, velocity profile and pressure profile.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1055-1060
• /
• 2001

Springing phenomena of ships is introduced with its concept, research history and approach methodology. Being a hydroelasticity problem, non-linear vibration and stochastic process, springing was formulated and modeled in vibration point of view separating hydrodynamic force into system properties and excitation force. Both RAO and response spectrum as well as wave spectrum were presented as a case study of springing analysis for a flexible vessel with wide breadth. The effect of advance speed, heading angle and loading condition were investigated as parametric study. The results and observations showed availability of analysis for the prediction of the ship springing behavior.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.245-254
• /
• 2006

Using a natural gradient tracer test, the characteristics of hydrodynamic dispersion according to each depth of a fractured rock were studied, and the effective porosity and longitudinal dispersivity of the fractured rock were estimated. The difference of vertical hydrodynamic dispersion was identified by concentration breakthrough curves linear regression analyses of bromide concentrations according to depths versus time, and hydraulic fracture characteristics at two intervals of the monitoring well. Higher concentration and faster arrival time at GL- 18 m depth (RQD 13%, average joint spacing 2 cm, TCR 100%) than at GL- 25 m depth (RQD 41%, average joint spacing 7 cm, TCR 100%) resulted from shorter distance and more fractures. Tracer was transported through the 1 st fractures until the arrival of its peak concentration and through the 2nd fractures or matrix diffusion after the arrival of its peak concentration. The increase/decrease slopes of bromide concentration versus time were 3.46/-1.57 at GL-18 m depth and 3.l9/-0.47 at GL- 25 m depth of the monitoring well. So the faster bromide transport was confirmed at GL- 18 m depth with more fractures. The concentration increment of bromide was fitted by a Gaussian function and the concentration decrement of bromide was fitted by an exponential function. Effective porosity and longitudinal dispersivity estimated by CATTI code were 10.50% and 0.85 m, respectively.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2885-2889
• /
• 2007

In this study, the effect of particle aggregation on dynamic response time of Electrorheological (ER) fluid is investigated. The particle aggregation time is defined as the time interval between the application of the field and the formation of the first chain bridging the two electrodes. The dynamic response times of an ER fluid sheared between two concentric cylinders have been obtained under two different experimental conditions: the one is that the electric field is induced before shearing, and the other is that the electric field is induced after shearing. From the difference between two response times, the particle aggregation times are determined under various electric fields and shear rates. The experimental results show that the aggregation rate is decreased with an increase of shear rate, while electric field has little effect on it. Therefore, it is verified that the hydrodynamic force hinders the formation of chain-like structures.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.176-184
• /
• 2012

Installing floating structures in a coastal area requires careful observation of the finite-depth effect. In this paper, a Rankine panel method that includes the finite-depth effect is developed in the time domain. The bottom boundary condition is satisfied by directly distributing Rankine panels on the bottom surface. A stepwise analysis is performed for the radiation diffraction problems and consequently freely-floating motion responses over different water depths. The hydrodynamic properties of two test hulls, a Series 60 and a floating barge, are compared to the results from another computation program for validation purposes. The results for both hulls change remarkably as the water depth becomes shallower. The important features of the results are addressed and the effects of a finite depth are discussed.