• 제목/요약/키워드: Hydrocarbon product

검색결과 57건 처리시간 0.034초

난류 탄화수소화염의 직접수치해석 및 이차 조건모멘트닫힘 모델링 (Direct Numerical Simulation and Second-Order Conditional Moment Closure Modelling of a Turbulent Hydrocarbon Flame)

  • 김승현;허강열
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.35-41
    • /
    • 2001
  • A second-order conditional moment closure(CMC) model is applied to the prediction of local extinction in a turbulent hydrocarbon diffusion flame and compared with direct numerical simulation(DNS) results for the flame. Combustion of a hydrocarbon fuel is described by a simple two-step mechanism. A second-order correction for conditional mean reaction rate terms is made by the assumed pdf method. The results show that the second-order closure is necessary for accurate prediction of intermediate species, while first-order CMC gives good predictions for fuel, oxidant, product and temperature. Conditional variances and covariances are well predicted during an extinction process while they are overpredicted during a reignition process.

  • PDF

토착 미생물의 활성에 의한 유류오염 토양 정화 실험

  • 이지훈;이종규;최상진
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
    • /
    • pp.199-202
    • /
    • 2002
  • Many methods have been developed for the remediation of contaminated soil and groundwater. Among those technologies, in-situ bioremediation is most likely to be cost-effective method for petroleum hydrocarbon contamination. But the in-situ bioremediation can require more time to remediate hydrocarbon-contaminated soil and groundwater than other methods. Therefore we intended to save time of in-situ bioremediation using a biological additive to activate indigenous microbes in soil. The additive, 'Inipol EAP 22' stimulates the growth of specific flora, significantly accelerating the speed at which hydrocarbons are biodegraded. And it hans been tested in accordance with protocol approved by the USEPA and is registered on the National Contingency Plan Product Schedule List. In the experiment, three soil samples contaminated with fuel oil were prepared in the same concentration. Inipol EAP 22 was not added to one sample and was added to the other two samples with 5% and 10% of hydrocarbon by weight respectively. And $CO_2$gas derived from bacterial respiration was analyzed in each samples for 15 days. As a result, 145% and 153% of $CO_2$ evolution (microbial respiration) against the sample without 'Inipol EAP 22' occurred in samples with 'Inipol EAP 22' addition of 5% and 10%, respectively

  • PDF

Pre-cooking and liquid smoke affect the physicochemical and microbiological quality and polyhydroxy aromatic hydrocarbon (PAH) content in smoked skipjack tuna (Katsuwonus pelamis L.)

  • Silvana Dinaintang Harikedua;Ella Dertina Saragih;Eunike Louisje Mongi;Lena Jeane Damongilala;Netty Salindeho;Henny Adeleida Dien;Nurmeilita Taher;Helen Jenny Lohoo;Mayse Sofien Siby
    • 한국식품저장유통학회지
    • /
    • 제31권2호
    • /
    • pp.210-217
    • /
    • 2024
  • This study aimed to compare the quality of smoked fish products processed with liquid smoke with and without pre-cooking when stored at room temperature (25℃) for 0, 2, 4, and 6 days. The observations included moisture content, water holding capacity, color, and total plate and mold counts. The treated samples were also analyzed for polyhydroxyaromatic hydrocarbons (PAHs) at day 0. The study found that the pre-cooked products had a lower moisture content (55.1%) than the control (59.9%) during storage. Additionally, the pre-cooked product had a higher water holding capacity than the control. The TPC value indicates that the pre-cooked product meets the Indonesian standard for smoked fish up to the 2nd day of storage, whereas the control product only meets the standard on day 0. However, the total mold of the control products meets the Indonesian standard until the 2nd day of storage, while the pre-cooked products only meet the standard on day 0. The pre-cooked product had a higher lightness value (L*) than the control. The analysis of polyhydroxy aromatic hydrocarbon (PAH) showed that the pre-cooking process did not affect the concentration of PAH.

목질폐재(木質廢材)의 열(熱)-화학적(化學的) 탈(脫)산소-수소첨가반응(환원반응)에 의한 액화(液化)탄화수소의 합성 (II) (Hydrocarbon Synthesis of Waste Lignocellulosics by Liquefaction Reaction of Thermochemical Deoxyhdrogenolysis Method (II))

  • 이병근
    • Journal of the Korean Wood Science and Technology
    • /
    • 제19권4호
    • /
    • pp.80-84
    • /
    • 1991
  • Lignocellulosic biomass including acetosolv ricestraw and spruce lignin were liquefied and converted into liquid hydrocarbons by catalytic hydroliquefaction reaction. These experimental works were carried out in 1-liter-capacity autoclave using 50% tetralin and m-cresol solution respectively as soluble solvent and Ni. Pd. Fe and red mud as catalyst. $H_2$ gas was supplied into the reactor for escaltion of deoxhydroenolysis reaction. Catalyst concentrations were 1 % of raw material based on weight. The ratio between raw materials and soluble solvent are 1g and 10cc. The reaction conditions are 400-$700^{\circ}C$ of reaction temperature, 10-50 atms of reaction pressure. The highest yield of hydrocarbon, so called "product oil" showed 32% and 5.5% of lowest char formation when red mud was used as catalyst. The product oil yields from those of other catalysts were in the range of 20-29%. The influence of different initial hydrogen pressures was examined in the range d 30-50 atms. A minimum pressure of 35 atms was necessary to obtain a complete recovery of souble solvent for recycling.

  • PDF

토양오염 해석을 위한 석유제품 물성 및 TPH 분석 (Analysis of Physical Properties and Total Petroleum Hydrocarbon for Soil Contamination)

  • 임영관;정충섭;한관욱
    • 공업화학
    • /
    • 제23권6호
    • /
    • pp.618-623
    • /
    • 2012
  • 석유의 누출로 인해 토양과 지하수 오염이 점차 증가되면서, 토양환경에 대한 중요성이 점차 늘고 있다. 토양오염은 다른 환경오염에 비해 정화비용이 비싸며, 긴 정화기간이 요구된다. 본 연구에서는 토양오염을 발생시킬 수 있는 대표적 석유제품에 대한 물성분석과 함께 토양에 누유시킨 뒤, 석유계 총탄화수소화합물의 스펙트럼 패턴을 분석함으로써 유종들의 특성을 분석하였다. 이는 추후 석유에 의한 토양오염 발생 시, 어떤 석유제품에 의한 오염인지 쉽게 판단이 가능할 것이다.

Norbornadiene의 이량화반응에 의한 다중고리 탄화수소화합물의 제조 (Preparation of Polycyclic Hydrocarbon Compounds by Dimerization Reaction of Norbornadiene)

  • 정병훈;한정식
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제29회 추계학술대회논문집
    • /
    • pp.190-193
    • /
    • 2007
  • 노보르나디엔의 이량화반응에 의해 제조되는 다중고리 탄화수소화합물 제조에 대한 연구결과를 설명하였다. NBD 이량체 중에서 pentacyclic exe-t-exo, hexacyclic exe-eodo, hexacyclic endo-endo 이성질체를 선택적으로 제조하기위하여 이량화 반응을 실시하였다. 각각의 이량화반응 촉매, 반응절차 그리고 분석방법이 개발되었다. 본 실험을 통하여 적당한 반응조건, 비교적 높은 이량체수율을 얻었으며, 이 반응기술은 고에너지밀도 연료 개발에 유용하게 사용될 수 있을 것이다.

  • PDF

NBD 이량체 생성물의 효율적 분리방법 (Effective Separation Method of NBD Dimer Mixture)

  • 정병훈;한정식;민성기;임진식
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.797-799
    • /
    • 2010
  • 산업적으로 유용한 다중고리형 탄화수소화합물 중의 하나인 NBD 이량체 제조시, 이량화반응후 결과물에는 여러 가지 촉매와 용매, 부생성물 등이 포함되어 있다. NBD 이량체 혼합물의 수율을 증가시키기 위해서는 효율적인 분리공정이 가장 먼저 요구된다. 본 연구에서는 친환경적이고, 회수율이 높은 용매를 사용하여 NBD 이량체의 분리수율을 개선하였다.

  • PDF

New Design in Homogeneous Palladium Catalysis: Study of Transformation of Group 14 Element Compounds and Development of Nanosize Palladium Catalysts

  • Tsuji, Yasushi;Fujihara, Tetsuaki
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권11호
    • /
    • pp.1902-1909
    • /
    • 2007
  • This account reports an overview of our findings in homogeneous Pd-catalyzed reactions. Herein we describe the new design in reactions of Group 14 element compounds and in homogeneous nanosize Pd catalysts. In the early stages of our study, we developed Pd-catalyzed transformations of allylic esters with disilanes, silylcyanides and acylsilanes to the corresponding silylation, cyanation and acylation products, respectively. We also developed a Pd-catalyzed three component coupling reaction of Group 14 element compounds involving 1,3-diene and acid chlorides to form β,γ-unsaturated ketone as a single product. Recently, we focus our attention on modifying the catalytic environment by nanosize Pd in order to improve the performance of Pd catalysts. These nanosystems realize efficient catalytic environment with remarkable enhancement in catalytic activity and unprecedented selectivity.

수입육류 및 어류의 방사선조사 여부 판별을 위한 Marker로 검출되는 Hydrocarbons의 활용 (Application of Hydrocarbons as Markers for Detecting Post-irradiation of Imported Meats and Fish)

  • 황금택;박준영;김충기
    • 한국식품영양과학회지
    • /
    • 제26권6호
    • /
    • pp.1109-1115
    • /
    • 1997
  • Hydrocarbons were analyzed in irradiated beef, pork, dried and seasoned beef, dried anchovy, dried squid, dried shrimp, and fish paste to determine whether the hydrocarbons can be used as markers for detecting post-irradiation of the imported meat and fish products. The samples were irradiated at 0.5, 1, 3, and 6 kGy. Fat was extracted with hexane, and hydrocarbons were separated from the fat through Florisil column. The hydrocarbons were analyzed with GC. Hydrocarbons 15:0, 16:1, 17:1, 16:2, 17:2, and 16:3 in beef and pork, 17:1, 16:2, and 17:2 in dried and seasoned beef, 16:2 in dried anchovy, 16:1 and 17:1 in dried squid, 16:1, 17:1, and 16:2 in dried shrimp, and 16:1, 16:2, and 16:3 in fish paste were detected in the irradiated samples, but not in the unirradiated, so that the hydrocarbons may be used as makers for detecting post-irradiation of each item.

  • PDF

DAF와 혼화응집공정을 이용한 현탁성 고형물 함유 유류 오염 지하수 처리 (Treatment of Contaminated Groundwater Containing Petroleum and Suspended Solids Using DAF and Mixed Coagulation Processes)

  • 이채영;장영수
    • 한국지반환경공학회 논문집
    • /
    • 제11권8호
    • /
    • pp.25-32
    • /
    • 2010
  • 석유계 탄화수소 화합물로 인한 토양과 지하수 오염은 환경과 건강에 영향을 미치는 주된 원인으로 제기되어 왔다. 이러한 오염물질들은 흡착포, 활성탄 또는 중력 방식의 유수분리 장치 등을 이용하여 처리하고 있다. 하지만 이러한 경우 자유상 유류(free product)로 존재하는 경우에는 효과적이나 에멀젼 상태의 유류는 제거할 수 없는 것으로 알려져 있다. 따라서 본 연구에서는 굴착시 예상되는 지하수의 고농도 현탁성 고형물로 인한 지하수 처리시 문제점과 TPH(Total Petroleum Hydrocarbon)를 어떻게 효율적으로 제거할 수 있는지 방안을 제시하고자 한다. 고분자 폴리머를 사용하여 혼화 응집 실험을 수행한 결과 5분 이내에 SS(Suspended Solids)와 COD(Chemical Oxygen Demand) 농도가 지하수 수질 기준을 만족하는 것을 나타났으나, TPH 농도는 방류수 수질 기준을 만족하지 못하는 것으로 나타났다. DAF(Dissolved Air Flotation) 실험 결과 단일 DAF 공정으로는 방류수 수질 기준을 만족하지는 못하였다. 단일 DAF 반응조를 이용하여 DAF와 혼화 응집 반응을 동시에 수행하는 경우 20분에 모든 기준을 만족하는 것으로 나타났다.