• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.4
• /
• pp.315-321
• /
• 2010

In this study, we investigated the antibacterial activity and the skin moisturizing effect of cream contaning Cedrela sinensis A. Juss shoots extracts. MIC values of ethyl acetate fraction from Cedrela sinensis A. Juss shoots extracts on P. acnes and S. aureus were 0.13 %, 0.03% respectively and P. ovale and E. coli were 0.25 % equally. The results showed that the antibacterial activity of the ethyl acetate fraction on P. acnes and S. aureus were higher than the methyl paraben. The cream containing the ethyl acetate fraction from Cedrela sinensis A. Juss shoots extracts was formulated and its skin moisturizing effect was evaluated in a clinical trial. The skin hydration and transepidermal water loss (TEWL) were investigated after topical application of the cream. The skin hydrating effect of the cream containing Cedrela sinensis A. Juss shoots extract was 10 ~ 15 % higher than the placebo cream, and transepidermal water loss was decreased to 6.7 g/$m^2h$ in the subjects applied with cream containing the ethyl acetate fraction of Cedrela sinensis A. Juss shoots extracts. These results indicate that ethyl acetate fraction from Cedrela sinensis A. Juss shoots extracts could be applicable to new functional antibacterial cosmetics.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.1
• /
• pp.53-59
• /
• 2010

In seawater deposition condition, the corrosion and chemical attack of grouts are similar to those of concrete structure. Used in domestic MSG (Micro Silica Grouting) mixtured large amounts of silicate materials containing as cement powder is $8,000cm^2/g$ of the specific surface area or more due to the high hydration activity and high-strength, high durability, and features, $C_3A$ content of less than 5% to meet the standards chemical attack of seawater was evaluated as a cement material. Therefore, in this paper, with excellent seawater attack resistant MSG in combination with rapid hardening mineral was used, those of seawater characteristics were evaluated experimentally. Typically, sodium-silicate minerals or rapid hardening cements are used in domestic. About the homogel specimens with combination of MSG and rapid hardening agents for compressive strength, weight and length change characteristics were evaluated experimentally, and so we could present the excellent seawater resistant grouts combination.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.4
• /
• pp.195-202
• /
• 1989

In attempt to improve the chemotherapeutic activity of adriamycin, adriamycin-entrapped HSA microspheres were prepared and investigated by the various in vitro experiments. The shape, surface characteristics and size distribution of HSA microspheres are observed by scanning electron microscopy. The in vitro drug release, albumin matrix degradation by protease of HSA microspheres were studied. The shape of HSA microspheres were spherical and the surface was smooth and compact. The size of HSA microspheres ranged from 0.4 to $2.5\;{\mu}m$ and have average diameters of 0.5 to $0.7\;{\mu}m$. The size distribution of HSA microspheres prepared by ultrasonication was mainly affected by albumin concentration and heating time in the process of hardening. In in vitro, almost all adriamycin was released from HSA microspheres for 8 hr. Analysis of the resulting adriamycin release profiles demonstrated that adriamycin is released from the microspheres in two distinct steps, a fast phase (until 30 min) followed by a much slower sustained release phase. Drug release, which is due to diffusion, was depended on the rate of matrix hydration. Drug release was largely affected by albumin concentration and heating temperature during the process of hardening. Albumin matrix degradation of HSA microspheres was affected by heating temperature and albumin concentration. Higher temperature and longer times generally produce harder, less porous, and slowly degradable microspheres.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.10-18
• /
• 2005

Silk fabrics mordanted with $Fe^{2+},\;Ni^{2+},\;and\;Cu^{2+}$ were dyed with the aqueous extract of Cassia tora L. seed which was known to include water soluble colorant kaempferol, one of flavonol compounds. Kaempferol can react with free radicals and chelate transition metal ions, which is thought to catalyze processes leading to the appearance of free radicals and have antioxidant activity. In relation to the coordinating and chelating mechanism of the ions with the silk protein and kaempferol, reasonable conclusions should be made on the colorant uptake and the water fastness of the fabric. The amount of the colorant on the fabric was in the order of $Fe^{2+}>Ni^{2+}>Cu^{2+}$. In case of dyeing through coordinaiton bonds between transition metal ions and silk protein and colorants, it was thought that the ions with the smaller secondary hydration shell, the higher preference to the atoms of the ligand coordinated, and the suitable bonding stability for the substitution of primarily hydrated water molecules for colorants led to the higher colorant uptake. The water fastnsess of the fabric was in the order of $Fe^{2+}>Cu^{2+}>Ni^{2+}$. It should be reasonable to choose transition metal ions with weak and strong tendency to the ionic and the coordination bond, respectively, to the carboxylate anion of the silk protein. Although further research needs to be done, the conclusions above may be generally applied to the natural dyeing through the coordination bond mechanism between transition metal ions and colorants and substrates.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1431-1440
• /
• 2012

The optimum extraction of phenolic compounds from whole Rosa multiflora Thunberg fruits was accomplished using 70% ethanol, which produced extracts that generated a zone of inhibition around Helicobacter pylori of 13 mm when $200{\mu}g/mL$ phenolic compounds were applied. In this study, the quality of white bread baked from dough containing added Rosa multiflora Thunberg extracts was investigated. No deterioration of product quality factors including hydration of wheat flour, formation of dough and internal visual characteristics of dough was observed. However, white bread containing Rosa multiflora Thunberg extracts had a wet texture because of the high moisture level, as well as a high number of irregular bubble holes when compared to the control. Nevertheless, there were no remarkable differences between the sample and the control.

• Journal of the Mineralogical Society of Korea
• /
• v.5 no.1
• /
• pp.6-13
• /
• 1992

Thermodynamic data of mineral reactions were used to construct a phase diagram for the formation of illite from andalusite at one bar and 325${\circ}C$ in the hydrothermal alteration. Based on chemical compositions, the free energy of formation of illite coexisting with andalusite was calculated by assuming the ideal mixing ina bunary system consisting of muscovite and pyrophyllite components. For illite with structural formula $K_{0.86}Al_{2.93}Si_{3.03}O_{10}(OH)_2$, its free energy of formation is -1147.727 kcal/mole at the condition under consideration. The stability area of illite is more narrow than that of end-member muscovite and prefers lower activity of silica. Illite was formed by hydration of andalusite while pyrophyllite decomposed. Illitization took place preferentially at margin and/or along fractures of andalusite.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.363-370
• /
• 2011

This study considerated reject ash, wastes of coal-fired power plants, to use mineral admixtures for cement. The pozzolan activity selected the fineness of the efficient reject ash through comparison and it compared to the fly ash that are widely used for concrete mixed material. Cement composites was prepared replacing of slag cement by fineness reject ash and fly ash, and properties of cement composites was tested by paste(setting time, fluidity, instrumental analysis) and mortar(compressive strength). Instrumental analysis results showed hydration reaction of fineness reject ash was not different from fly ash, but had more dense micro structures. Results of physical properties showed fineness reject ash shorten setting time, increased compressive strength compared by fly ash. Therefore using fineness reject ash with $6,000cm^2$/g to concrete mineral admixtures or cement composites was might be possible and could contribute to improve properties of concrete.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.99-103
• /
• 2009

We evaluated the efficacy of pH-sensitive micelles, formed by methoxy poly(ethylene glycol)-b-poly($\beta$)-amino ester) (PEG-PAE), as carriers for paclitaxel (PIX), a drug currently used to treat various cancers. PTX was successful encapsulated by a film hydration method. Micelles encapsulated more than 70% of the PTX and the size of the PTX-encapsulated micelles (PTX-PM) was less than 150 nm. In vitro experiments indicated that the micelles were unstable below pH 6.5. After encapsulation of PTX within the micelles, dynamic light scattering (DLS) studies indicated that low pH had a similar demicellization effect. An in vitro release study indicated that PTX was slowly released at pH 7.4 (normal body conditions) but rapidly released under weakly acidic conditions (pH 6.0). We demonstrated the safety of micelles from in vitro cytotoxicity tests on HeLa cells and the in vivo anti-tumor activity of PTX-PM in B16F 10 tumor-bearing mice. We concluded that these pH-sensitive micelles have potential as carriers for anti-cancer drugs.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.132-132
• /
• 1999

In the cosmetics field, facial skins have been classified into four types according to self estimation as well as physiological parameters. The aim of this study is to understand skin condition in the levels and composition of stratum corneum (SC) lipids, and to propose new classification for skin types. We assessed the relationship between the SC lipid composition and the self-estimated skin types or physiological parameters of the skin. Sensitive skin has been of great concern over the last decades, and it should be recognized as a skin type. Therefore, we also investigated the influence of the SC lipid composition on variations of sensitivity evaluated by the Stinging Test. Fifty-five healthy Japanese women aged 22-44 participated in this study. Skin biopsies were taken from facial skin using polyethylene sheet with cyanoacrylate. SC lipids were extracted and separated into individual lipid classes. The combined ceramides and cholesterol were quantified by HPTLC. Free fatty acid was quantified according to the ACS-ACOD method. Instrumental measurements were made at the site around the biopsy. In addition, the Stinging Test and a sensory evaluation questionnaire were administered to all subjects. The generally recognized O-D skin type classification is dependent on the consumer`s subjective assessment with respect to their skin troubles. The product of hydration state and skin surface lipid level showed a significant correlation with self-estimated skin types. The oily-dry skin type classified according to physiological parameters as well as SC lipid levels should be characterized as delicate skin with its barrier function deteriorating in the winter. Two groups of sensitive skin were established. One is the barrier function of the skin is deteriorated, and another is the sebaceous gland activity is in decline.

• Advances in concrete construction
• /
• v.11 no.5
• /
• pp.419-428
• /
• 2021

The pH of cement-based materials (CBMs) is an important factor for their durability, sustainability, and long service life. Currently, the use of supplementary cementitious materials (SCMs) is becoming mandatory due to economic, environmental, and sustainable issues. There is a decreasing trend in pH of CBMs due to incorporation of SCMs. The determination of numerical values of pH is very important for various low and high volume SCMs blended cement mortars for the better understanding of different defects and durability issues during their service life. In addition, the effect of cement hydration and pozzolanic reaction of SCMs on the pH should be determined at initial and later ages. In this study, the effect of low and high-volume fly ash (FA) and ground granulated ballast furnace slag (GGBFS) cement mortars in different curing conditions on their pH values has been determined. Thermal gravimetric analysis (TGA) was carried out to support the findings from pH measurements. In addition, thermal conductivity (k-value) and strength activity indices of these cement mortars were discussed. The results showed that pH values of all blended cement mortars were less than ordinary Portland cement (OPC) mortar in all curing conditions used. There was a decreasing tendency in pH of all mortars with passage of time. In addition, the pH of cement mortars was not only dependent on the quantity of Ca(OH)₂. The effect of adding SCMs on the pH value of cement mortar should be monitored and measured for both short and long terms.