• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.179-181
• /
• 2004

This paper is proposed an adaptive fuzzy-neural network(A-FNN) controller based on the vector controlled induction motor drive system. The hybrid combination of fuzzy control and neural network will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed speed estimation of induction motor using A closed-loop state observer. The rotor position is calculated through the stator flux position and an estimated flux value of rotation reference frame. A closed-loop state observer is implemented to compute the speed feedback signal. The results of analysis prove that the proposed control system has strong robustness to rotor parameter variation, and has good steady-state accuracy and transitory response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.865_866
• /
• 2009

In this paper, a novel structure Bearingless SRM with hybrid stator poles is proposed. The motor torque can be controlled independently from radial force control. Analytical models of torque and radial force for proposed structure are explained. Based on these models, control scheme of desired radial force is proposed. In this control method, the magnitude of force can be controlled in arbitrary direction and magnitude by selecting some combinations of radial force windings. The validities of structure and control method are verified by the experimental results when motor is at standstill and running.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.505-508
• /
• 1999

Conventional adaptive speed estimators cannot avoid the influence of the non-linear inductance variation under the saturation conditions. Without speed sensors, it is difficult to identify the inductance variation using a reactive power mode because the model contains a term of the rotor speed. In this paper, we propose a novel speed estimator having hybrid architecture in order to estimate both the rotor speed and the inductance variation simultaneously when the motor flux is saturated. Proposed estimator consists of the error between the flux obtained from the stator voltage equation and the flux estimated from the rotor flux observer. Introducing a new correction term into the estimator increases the estimation ability of the conventional speed estimator even though the motor flux is saturated. The convergence of the speed estimation error is examined by simulation Furthermore, the experimental results show the validity of the proposed method.

• 전기의세계
• /
• 제28권3호
• /
• pp.65-71
• /
• 1979

This paper examines the reasonable winding arrangements of designing tapped winding capacitor motors to used in two voltage sources. The approach of this paper is based partly on a hybrid equivalent circuit of a single phase induction motor, together with an experimental method by sample machines. In results, the distribution of etra and main windings ia the stator is to be balanced in each magnetic pole and in order to have the same torque output characteristics for two different voltage sources, the extra/main winding ratio is to be adjusted. Experimental results obtaired with sample macines of about 1/8 hp output rating are used with analysis to predict the favorable winding conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.760-762
• /
• 2000

Hybrid type LPM can be widely applied in the precise position controlled devic because precise linear motion can be directly obtained by the simple control circuit without backlash in the rotary-type stepping motor. Also, LPM can increase the Position resolution, which was limited by mechanical manufacturing limit and characteristic of magnetic material. using micro-step drive method to decrease the noise and vibration further. Especially, Double-side LPM may be replaced the solenoid as the valve driving device without difficulty and give full play to control the valve accurately. Hence, In this paper, magnetic circuit of double-side LPM was confirmed and static thrust force curve according to the relative displacement between stator and mover, was analyzed by the two dimensional finite element method. From this results, we can suppose the excitation current to be controlled optimally.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2374-2376
• /
• 2000

In this paper, we propose an indirect vector control method using Adaptive Neuro-Fuzzy Inference System (ANFIS) parameter estimator. It estimates the rotor time constant when the indirect vector control of induction motor is applied. We use the stator current error that is difference between the current command and estimated current calculated from terminal voltage and current. And two induced current estimate equations are used in training ANFIS.The estimator is trained by the hybrid learning algorithm. Simulation results shows good performance under load disturbance and motor parameter variations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.735-737
• /
• 1995

Linear pulse motor(LPM) has been used in a wide range of application due to many advantages for the precision position and speed control system for the bidirectional linear motion. In this study, the hybrid, single-side type LPM was designed and examined for characteristics of position detection. Precision position detection signals could be sensed by synchrnous rectifier method from the LPM stator scale. Experimental results show that the position precisions are good enough to perform the LPM position control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.381-382
• /
• 2014

하이브리드 자동차는 동력을 얻기 위해 엔진과 전동기를 모두 사용한다. 이 하이브리드 자동차의 구동부 구조는 다양한 형태로 구성할 수 있는데, 이 중 직렬-병렬 구조는 엔진의 토크 및 속도 자유도를 모두 확보할 수 있어 높은 효율을 달성할 수 있다. 직렬-병렬 구조는 발전기, 전동기, 그리고 속도 분배를 위한 유성 기어를 이용하여 주로 구현되고 있고, 최근에는 다양한 새로운 형태의 전동기가 개발되어 이를 구동부에 적용하는 것에 관한 연구가 진행되고 있다. 본 논문에서는 이 중 고정자를 회전자에 독립적으로 회전시킬 수 있는 새로운 형태의 전동기를 사용하는 구조에 관한 내용을 다룬다. 위의 전동기는 기존 구조에서 유성 기어 및 발전기의 역할을 대체하여 토크 분배 및 전기적 출력 변환을 수행할 수 있다. 또한, 회전하는 고정자에 인버터 회로를 탑재하여 슬립 링 대신 회전하는 고정자에 전력을 공급하는 방식을 제안한다.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.119-125
• /
• 2016

본 논문에서는 기존 휠-레일 고속열차에 자기부상열차의 추진방법을 적용한 하이브리드 방식의 고속열차의 주행 동특성에 대해서 연구하였다. 초전도 선형동기전동기를 추진 동력으로 하는 휠-레일 방식의 고속열차는 강력한 추진력을 지니면서도 자기부상열차에 비해 기존 선로와의 호환성 및 경제성 측면에서 유리할 것으로 예상된다. 본 논문에서는 초전도 선형동기전동기를 기존의 휠-레일 고속철도에 적용하는 두 가지 방안에 대해서, 초전도 선형동기전동기 추진이 휠-레일 고속열차의 동특성에 미치는 영향을 살펴보기 위하여 초전도 선형동기전동기의 회전자와 고정자의 상호 작용을 검토하고 이를 포함한 차량의 동특성 모델을 구축하였다. 구축된 모델을 이용한 시뮬레이션을 통해 초전도 선형동기전동기의 회전자와 고정자의 상호 작용이 주행 중 고속 안정성, 승차감 및 가이드웨이 불규칙도에 미는 영향을 분석하였다.

• 연구논문집
• /
• 통권27호
• /
• pp.87-99
• /
• 1997

Present paper describes on/off design performance of a 50KW turbogenerator gas turbine engine for hybrid vehicle application. For optimum design point selection, relevant parameter study is carried out. The turbogenerator gas turbine engine for a hybrid vehicle is expected to be designed for maximum fuel economy, ultra low emissions, and very low cost. Compressor, combustor, turbine, and permanent-magnet generator will be mounted on a single high speed (82,000 rpm) shaft that will be supported on air bearings. As the generator is built into the shaft, gearbox and other moving parts become unnecessary and thus will increase the system's reliability and reduce the manufacturing cost. The engine has a radial compressor and turbine with design point pressure ratio of 4.0. This pressure ratio was set based on calculation of specific fuel consumption and specific power variation with pressure ratio. For the given turbine inlet temperature, a rather conservative value of $1100^\circK$ was selected. Designed mass flow rate was 0.5 kg/sec. Parametric study of the cycle indicates that specific work and efficiency increase at a given pressure ratio and turbine inlet temperature. Off design analysis shows that the gas turbine system reaches self operating condition at N/$N_{DP}$ = 0.53. Bleeding air for turbine stator cooling is omitted considering low TIT and for a simple geometric structure. Various engine performance simulations including, ambient temperature influence, surging at part load condition. Transient analysis were performed to secure the optimum engine operating characteristics. Surge margin throughout the performance analysis were maintained to be over 80% approximately. Validation of present results are yet to be seen as the performance tests are scheduled by the end of 1998 for comparison.