• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.1125-1131
• /
• 2014

Application of residential demand response (DR) programs are currently realized up to a limited extent due to customers' difficulty in manually responding to the time-differentiated prices. As a solution, this paper proposes an automatic home load management (HLM) framework to achieve the household minimum payment as well as meet the operational constraints to provide customer's comfort. The projected HLM method controls on/off statuses of responsive appliances and the charging/discharging periods of plug-in hybrid electric vehicle (PHEV) and battery storage at home. This paper also studies the impacts of different time-varying tariffs, i.e., time of use (TOU), real time pricing (RTP), and inclining block rate (IBR), on the home load management (HLM). The study is effectuated in a smart home with electrical appliances, a PHEV, and a storage system. The simulation results are presented to demonstrate the effectiveness of the proposed HLM program. Peak of household load demand along with the customer payment costs are reported as the consequence of applying different pricings models in HLM.

• Tribology and Lubricants
• /
• 제29권5호
• /
• pp.318-323
• /
• 2013

Overheating in electrical motors results in detrimental effects such as degradation of the insulation materials, demagnetization of magnets, increases in Joule losses, and decreases in motor efficiency and lifetime. Thus, it is important to find ways to dissipate heat from the motor and to keep the motor operating at its most efficient temperature. In this study, a new design to guide air flow through a given brushless direct current (BLDC) motor is developed and the design is analyzed, specifically by using computational fluid dynamics (CFD) simulations. The results showed that the temperature distribution in the three proposed models is lower than that in the original model, although the speed of the cooling fan in the original model reaches a very high value of $15{\times}10^3$ rpm. The results also showed that CFD can be effectively used to simulate the heat transfer of BLDC motors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.796-797
• /
• 2011

하이브리드 자동차의 Integrated Starter & Generator (ISG)는 기동 시 높은 토크를 발생시키면서 진동과 소음을 동반한다. 이러한 진동 및 소음은 차량의 품질 확보를 위하여 최소화 시켜야 할 필요가 있다. 본 논문에서는 매입형 영구자석 동기 전동기로 설계된 ISG의 진동 및 소음 저감에 관한 연구에 대하여 다룬다. ISG의 진동 및 소음 저감을 위하여 회전자 코어의 형상 최적설계, 슬롯 수 변경설계 그리고 회전자의 step skew를 적용시켜 각각의 설계방법이 ISG의 진동 및 소음에 미치는 영향을 해석과 실험을 통해 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.87-91
• /
• 2004

In this paper, the paralleled forward converter, that is generally used as the power supply for the low voltage, high current load, is described. The proposed forward converter for battery charging could be provided the power without failure not only in steady state but also in the transient period by the step load variation or the unexpected faults among the converter modules. Each converter nodule designed is operated alone with the self closed controller for the elevation of stability, performance, reliability, and maintainability. The frequency response of the designed converter module is analyzed, and the stability is confirmed in analytic method. And the experiments of the paralleled battery charger are carried out in steady state, in the step load variation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.505-507
• /
• 2005

In this paper, a timing analysis is performed for the CAN-based simulator system for a fuel cell hybrid electric vehicles. The CAN protocol is recently being used for conventional vehicles, however, the network-induced delay can make the in-vehicle network system unstable. This problem may be occurred in the future vehicles because more ECUs are being required than recent vehicles. In order to develop a stable network-based control system, timing analysis is required at the design process. Throughout this analysis, timing parameters that affect transmission delay are examined and an effective method of predicting a sampling time for a stable communication via CAN protocol. In order to show the validityof suggested timing analysis. some experiments are performed using DSPs with CAN module.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1038-1039
• /
• 2015

미니트램(Mini-Tram)의 에너지 공급시스템은 유도급전(IPT: Inductive Power Transfer) 기반의 무선급속충전(Wireless High Speed Charging) 및 슈퍼커패시터(Supercapacitor) 기술을 융합하여 구성되었다. 기존의 전기이중층 커패시터(EDLC) 및 하이브리드 커패시터(LIC)는 급속충전을 위한 출력성능은 충족하지만, 낮은 에너지밀도 때문에 미니트램의 활용성을 제한하고 있다. 이에 수송시스템 분야에서의 커패시터의 경쟁력을 향상하기 위해서는 최소한의 공간 및 무게 조건을 충족함과 동시에 에너지 밀도를 극대화할 수 있는 하이브리드 커패시터의 개발이 요구된다. 본 논문에서는 개발 중인 미니트램의 에너지 요구량을 산정하여 매체의 개발목표 사양을 도출하고 이를 실현하기 위한 방안에 대해서 논하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.968-969
• /
• 2006

환경 친화적인 자동차, 안전한 자동차, 편리하고 편안한 자동차 등에 대한 다양한 요구에 효과적으로 대응하기 위해 기존의 기계/유압식 자동차 부품들을 전기장치로 대체하기 위한 연구가 꾸준히 진행되고 있으며, 특히 반도체 기술의 발전에 의한 가격경쟁력 강화에 힘입어 신규부품 개발 분야를 중심으로 자동차 부품의 전기/전자화가 급격히 진행되고 있다. 이에 따라 자동차에서 사용되는 전기에너지의 소요도 지속적으로 증가하여 새로운 차량용 전원체계에 대한 연구, 개발의 필요성이 대두되었고, 1990년대 중반 미국의 MIT/Industry Consortium 등을 중심으로 선행연구가 진행되어 자동차용 42V 전원체계가 새로운 대안으로 제시되었으며, 아울러 연비개선을 위한 마일드 하이브리드 기능의 채용이 검토되었다. 본 논문에서는 42V 전원체계 및 마일드 하이브리드 시스템 성능 구현에 핵심적인 역할을 하는 에너지 저장시스템에 관해 소개하고, 마일드 하이브리드 운용에 적합한 에너지 관리장치 개발에 대해 간략히 소개하고자 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2006-2010
• /
• 2008

This paper deal with the improvement performance and test result of traction motor for Bimodal low floor vehicles that are CNG(Compressed Natural Gas) hybrid bus. The improvement performance concept of the traction motor is studied in terms of electrical characteristics and mechanical construction. Finally, this paper introduces the result of the traction motor test for low floor vehicles, and mentioned the detail design concept of traction motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1017-1018
• /
• 2007

Interior permanent magnet synchronous motor (IPMSM) for traction motor in the hybrid electric vehicle (HEV) has different parameters and characteristics according to pole and slot combinations. The fitting combination of pole and slot in the IPMSM improves characteristics of traction system ultimately. This paper deals with analyzing the characteristics of IPMSM for mild type HEV according to pole and slot combinations. Based on the result of characteristics, suitable pole and slot combination is presented to maximize efficiency of traction motor in the HEV system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1141-1143
• /
• 2005

This paper presents the reasonable design parameters of a SRM for hybrid electric vehicle driving. For the design of SRM, the initial model is designed using the equivalent magnetic circuit method. In order to optimize the SRM for HEV. The initial model is redesigned by FEM with the variation of the stock length and turns of winding. This paper shows that a flat-topped current of a phase can be made from a change of the stack length and the number of turns for high efficiency, high average torque and a lower torque ripple. The change of current falling time as a variation of turn-off angle was shown by FEA. The iron loss and copper loss were described. The torque of the redesigned motor is suitable for low and high speed ranges to drive a HEV that was verified by the speed-torque curve.